Top Plastic Bearing Housing Reviews

OTC Race and Seal Driver Set,10-13/64' L

  • Set permits installation of tapered bearing races and seals without damage to the component or housing.
  • Includes a driver handle plus 9 popular sizes of bearing and seal drivers, ranging from 1.565 to 3.180 inches.
  • Use the tapered side of driver to install races.
  • invert the driver to the flat side to install seals.
  • Includes the following sizes of aluminum drivers: 1.565 inch, 1.750 inch, 1.965 inch, 2.325 inch, 2.470 inch, 2.555 inch, 2.830 inch, 2.995 inch, and 3.180 inch.
  • Rugged blow molded plastic storage case keeps tools contained and organized so they are ready to go when you need them.
Check Stock

SRC16 Sealmaster New Ball Bearing Cartridge Unit

  • Cartridge block with ball bearing insert for use with cylindrical bore housings.
  • Steel cartridge housing and single-row radial ball bearing for applications that support high radial loads.
  • Relubricatable solid one-piece cartridge housing for maximum strength and rigidity.
  • Fixed-type bearing with two set screws set apart at 120 degrees for secure attachment to a cylindrical shaft.
  • Felt labyrinth seal for protection against contaminants, and for less drag and heat generation than heavy contact seals.
Check Stock

Bang II (Feat. Uppercase 5ive)

  • Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
  • Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
  • The bearing adapters are included in the set.
  • We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.
Check Stock

Industrial Black Metal Furniture Legs,Black Cast Iron Table Legs,RetroHeavy Duty Square Tube Desk Legs,Metal Dining Coffee Work Table Bench Furniture Legs,Set of 2

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

UCT202-010T NTN New Ball Bearing Take Up

  • Take-up block with spherical roller bearing insert for use with a Rexnord center pull frame.
  • Cast-iron housing and self-aligning steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing take-up block for maximum strength and rigidity.
  • Fixed-type bearing with a single setscrew locking collar for secure attachment to a cylindrical shaft.
  • Metal clearance seal for no speed or temperature limitations, and no frictional drag.
Check Stock

SKF F2B 100-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 3-7/8\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Check Stock

SKF F2B 108-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 5-21/32\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Check Stock

4inch Grower s Exhaust Fan FanGoFast 90CFM 100mm Axial Aluminum Alloy Duct Ventilation Extractor w/US Plug for Grow Tent Workbench Greenhouse HVAC Pipe

  • 【Easy to Install】Hon&Guan mixed flow inline duct fan's blade and the body are made of high quality plastic. Ductings are made of metal at duct....
  • 【High Quality Material】durable metal housing Ideal for long duct runs.Mixed flow design combined with a PWM-controlled motor,suitable for air....
  • 【Powerful Airflow】Airflow:311 CFM. Durable plastic fan housing and blades for low noise. Quickly and efficiently move vast amount of air to....
  • 【Long Life】Long life ball bearing motor (up to 50,000hours) with thermal overload protection. For Air Purification-Removing a large amount of air....
  • 【Application Scenarios】Designed to quietly ventilate grow tents, transfer heating/cooling to rooms, circulate fresh air, cool AV closets, exhaust....
Check Stock

Fantech PB 110L7 110 CFM Bath Fan 7W Dimmable LED Light Energy Star Wet Location 4 Duct

  • HIGH-QUALITY FAN : Durable in-line fan is backward inclined for strong air delivery with minimal noise at 250 CFM.
  • ENERGY EFFICIENT: Fan is ENERGY STAR certified to provide energy-efficient and high-quality production.
  • EASY INSTALLATION: Sturdy polycarbonate plastic housing mounts directly to the bracket and the bracket mounts to rafters or joist for a quick and....
  • FEATURES: Housing has an external rotor, ball bearing motor for many years of reliable service.
  • GREAT FOR BATHROOM: UL Listed for use over tubs and showers with a GFCI circuit allowing you to capture the steam before it spreads throughout the....
Check Stock

Sealmaster NP-27 Pillow Block Ball Bearing Non-Expansion Type Normal-Duty Regreasable Setscrew Locking Collar Felt Seals Cast Iron Housing 1-11/16 Bore 2-1/8 Base to Center Height 5-3/4 Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

Yeah Racing Signal 10 Master Competition 40x40mm Cooling Fan #YA-0534

  • Fan Size: 40*40*12mm, Amp Dram at 8.4v: 0.61.
  • Operating voltage 6.5-8.4v, Plastic Blade and Frame Housing.
  • Dual ball Bearing, Stainless steel shaft core, Wire Length 200mm.
  • Connector Futaba, Fan Speed: 19000 R.P.M (+/-10%).
  • The maximum power input voltage is 8.4v (2 cells Li-Po).
Check Stock

Sealmaster NP-16 Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1" Bore, 1-7/16" Base to Center Height, 4-1/8" Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

DELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock