Top Plastic Bearing Bushing Reviews

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
You can save hundreds of dollars by using this one pilot puller.
VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
This blind hole bearing puller is built to last.
DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.

Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
Repeat action until the bearing or bushing has been removed.
U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....

Check Stock

OTC 27794 1/2\-3\ Bushing Driver

Specially selected to provide the driver sizes usually needed in automotive service.
Proper-size driver for nearly any automotive seal bearing or bushing installation job.
Set includes 41 discs along with handles spacers and drivers ranging from 1/2 to 3" in diameter.

Check Stock

Monroe Shocks & Struts Magnum Light Truck 550064 Shock Absorber

Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.

Check Stock

Monroe Shocks & Struts Magnum Light Truck 550061 Shock Absorber

Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.

Check Stock

Cal Hawk Tools CZTJWW Trailer Jack Wheel

1200 pound capacity High-Density polyethylene caster with Zinc plated carbon steel bolt, bearing and bushing.
Bushing dimensions: 11/16" diameter x 2-1/8" long.
Bolt dimensions: 1/2" diameter x 3" long.

Check Stock

5 Lug Front Wheel Hub & Bearing Assembly Pair Set for 01-06 Lexus LS430

ULTRA STURDINESS & DURABILITY: Forged from high strength aluminum for extra durability and strength, the driver and discs feature extraordinarily long service life and won’t mark the bearings. The solid, knurled handle offers extra grip and control during use..
VERSATILITY: Collars/discs of 9 different sizes fit standard races used in most wheel bearing applications..
EASY USAGE: To use, simply select the correct bushing, align straight and centered, and then pound in/out. Suitable for seating bearings on cars, small engine trucks, motorcycles, etc..
CONVENIENT STORAGE: This set comes in a blow-molded plastic carrying case for easy transport, simple storage, and quick organization..
ALL-IN-ONE: Our 9-disc and 1-driver set simplifies bearing installation for everyone from master mechanics to DIY novices. Our super sturdy and well-designed tool set guarantees long service life without damaging your bearings..

Check Stock

MaxAuto 14 x 1.75' Spoked Plastic Wheel with Tire, Black,2 Pack, 1.75' Offset Hub Length,1/2' inside Bearing

Please check your existing tire Sidewall for tire, hub and bushing size to ensure proper replacement fit..
Plastic spoked wheel,Load capacity/speed: 150 lbs.
1.75" tire width(The actual width of the tire much closer to 2.00").
1.75" Offset Hub Length,1/2" inside Bearing.

Check Stock

BTSHUB 21 pcs Bushing Removal Tool, Bearing, and Seal Driver Set 70mm - 150mm Discs Extra Large

PROFESSIONAL BEARING TOOL KIT - Extra Large custom bush, bearing and seal driver set, with ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance. Allows you to build your own custom bushing driver so you always have the right size for the job.
DISCS SIZES RANGE -The discs go from 70mm (2.75 inches) all the way to 150 mm (5.9 inches) in 5 mm(0.2 inches) increments..
EASY OPERATION - All discs are connected with a 12mm shaft and screw which quickly connects to a 280mm (11" ) handle, help you remove or install bearings quickly and professionally.
INTERCHANGEABLE - All the 17 pieces discs are interchangeable with each other, allowing the mechanic to complete the job quickly, professionally and promptly.
DURABLE CARRYING CASE: Comes with a heavy-duty plastic case with precision-sized compartments for every piece - ideal for storage and transport.

Check Stock

Michigan Motorsports LS1 LS3 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 LSX LQ9 LS2 LS3 LS7 Trunnion

Includes 16 Trunions, 32 Bushings, 32 Circlips.
Fits all OEM LS Rocker Arms. Replacement Trunnion Kit for LS Engines.
Micro-polished hardened shafts with C932 bearing bronze bushings.
LS1 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 6.2 LSX LQ9 LS2 LS3 LS7 Trunnion.
Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..

Check Stock

E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)

【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..

Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.

Check Stock

Prime-Line GD 12234 Garage Door Torsion Spring, .250 inch x 2 inch x 32 inch, Green, Right Hand Wind

Torsion Springs Single Left 243 x 2" with Winding Rods Center Steel Bearing.
Includes spring left, steel bearing and winding bars.
Springs are made in the USA using Oil Tempered.
You will receive only ONE (1) bushing or bearing with a pair of springs.

Check Stock