Top Plastic Barbed Hose Fittings Reviews

Northern Brewer - Silver Serpent Stainless Steel Immersion Wort Chiller

  • A simple tweak, adding barbed fittings and a drop-angle to our favorite immersion chiller, spawns a new best-in-class product. Introducing Silver....
  • Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go..
  • Brew with peace of mind like never before. Drop-angle connections keep surprise leaks outside your kettle and away from cooling wort..
  • Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source..
  • Comes fully assembled with tubing, barbed fittings, and hose clamps..
Check Stock

50 Pcs Drip Irrigation Coupling Fittings 1/4 Drip Irrigation Tubing Straight Coupling/Single Barbed Connectors for Universal 1/4 Inch Irrigation Tubing

  • ✔【High Quality】: Made of high-impact, high-strength plastic material, Durable, strong, water resistant.
  • ✔【Fits 1/4 inch irrigation hose】: This irrigation straight coupling connectors connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Kindly Note:Please check the size carefully before purchasing..
  • ✔【Easy to Install】: This coupling fittings for 1/4 inch irrigation tubing is easy to be installed without glue, tools, or clamps. Push the tubing firmly over the tee fitting.Tips:Put the tubing end into 75°~80° hot water for 30 seconds before pushing them..
  • ✔【Wide Application】:This drip irrigation single barbed connector for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
  • ✔【 Package Included】: 50 pieces of 1/4 inch barbed straight coupling fittings connectors are included in..
Check Stock

Metalwork 2\ Tri Clamp to 1\ Hose ID Barbed Adapter SUS304 Sanitary Hose Pipe Fitting

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

ANPTGHT Hose Barb Fitting Elbow 3/8 Hose Barb x 1/2 Male NPT Barbed Adapter for Fuel Gas Liquid Air Pack of 5

  • 【Material】Plastic barb connector, made of high-quality PP（Polypropylene） material.
  • 【Size】3/8" Hose Barb x 1/2" Male Male thread..
  • 【Usage】Plastic hose barb can be easily connected with tubing hose line and female thread..
  • 【Advantage】 Barbed fittings can be used with PVC, PU, Rubber hose or tubing Easy to install and not easy to drop off, good strength and durability..
  • 【Wide range of use】Suitable for applications in pharmaceutical, food and beverage, laboratory and others..
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • ...nd pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
  • PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
  • Comes with flex hoses, fittings, and instructions for quick reference.
  • Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Check Stock

DERNORD 2 Pack 1.5\ Tri Clamp to 0.5\ Hose Barbed Adapter SUS304 Sanitary Hose Barb Pipe Fitting

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1/2" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock

DERNORD 1.5\ Tri Clamp to 1\ Hose Barbed Adapter SUS304 Sanitary Hose Pipe Fitting (1 Inch Barb Hose)

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock

Little Giant SPDK Sump Pump Discharge Hose Kit, 1-1/4” Hose – 1-1/2” & 1-1/4” Adaptors, 24-Feet

  • SUMP PUMP HOSE: Sump Pump Discharge kit includes 1-1/4" and 1-1/2" NPT barbed adapters.
  • DISCHARGE HOSE: It is Ideal for discharging water out of a basement sump pit to a safe location outside of the home. Kit includes 24' corrugated polyethylene hose.
  • COMPATIBLE HOSE: It is compatible with sump pumps with 1-1/4 inch FNPT or 1-1/2 inch FNPT discharge. It includes ABS thread x barbed adapter and galvanized steel clamps. IT IS NOT COMPATIBLE WITH GARDEN HOSE FITTINGS.
  • WATER PUMP HOSE DIMENSION: The sump pump discharge hose kit is of opening size 20 x 17 x 5.5 inches.
Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

  • ❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
  • and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
  • ❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
  • ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
  • ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....
Check Stock

Joywayus 1/4'(6mm) ID Hose Barb 4 Way Union Fitting Pipe Cross Intersection/Split Brass Water/Fuel/Air

  • 1/4" barb tee to connect 1/4" I.D. hose,we can provide customized orders,including oem..
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).For use with plastic or rubber hose.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Check Stock

JoyTube Plastic 1/4 ID Hose Barb Fittings Equal Barbed Tee Pipe Connectors 3 Way Joint Splicer Mender Union Adapter for Boat Aquarium Pack of 6

  • Plastic Tee hose barb can be easily connected with 1/4" ID tubing hose line..
  • Made of polyethylene(PE) high quality plastic material, firm and durable, which can withstand -9 °F to 175 °F temperature, but it's not resistant to oil..
  • Wide range of use: Suitable for applications in garden, pharmaceutical, fooand beverage, laboratory, aquarium and others..
  • Smooth surface and inner wall, durable Light and Small. Exquisite craftsman makes it safe and reliable..
  • Plastic barbed fittings can be used with PVC, PU, Rubber hose or tubing..
Check Stock

Brass Hose Barb Tee 1/4 x 1/4 x 1/4 Barbed T -Fitting 3 Ways Air Hose Fittings Pack of 5

  • 1/4" barb tee to connect 1/4" I.D. hose,we can provide customized orders,including oem..
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).For use with plastic or rubber hose.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Check Stock