Top Plastic Arbor Reviews

KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4

Professional high speed steel M42 (not M3) with cobalt 8% cutting teeth hardened to control the efficient and durable and reliable use on workpieces like sheet metal, Aluminium, wood, plastic, plasterboard, etc.. HSS M42 teeth is particularly good for high strength metal such as stainless steel (HSS M3 ones are good for middle strength metal but not high strength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill ....

Check Stock

Metal Cutting Diamond Blade 4 1/2\- BRSCHNITT 115mm All-Purpose Diamond Saw Blade for Rebar Sheet Metal Angle Iron Stainless Steel Concrete.

√ Size-115mm(4.5"), the incision thickness is approximately 2.3mm-2.4mm, with the arbor of 22.23mm(7/8"), suitable for most of hand-held grinder or trim saw with 7/8" arbor.
√ Application--Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood..
√ Double-side coated with abrasive material,More stable cutting, deeper depth, increased efficiency and cost savings.
√ Engineered for use one blade for all purpose. Fire Fighters, RescueTeams, Police and Demolition Contractors ".
√ Suitable for most of hand-held grinder or trim saw with 7/8"" arbor,Dry working without water ".

Check Stock

Wheel Car Decal and Sticker Remover Tool, Rubber Eraser Wheel Car Decal Sticker Adhesive Remover 4Pad with Drill Adapter Kit

ERASER WHEEL DECAL REMOVER: Remove vinyl decals, adhesives, pinstripe, stickers, double-sided molding tape, striping and trim from cars, trucks, RVs, and windows(NOT suitable for plastic surfaces, test discreet area first)..
SAFE & NON-TOXIC: Vnyl Decal Remover Eheel 3m. The original material is not scratched. This rubber drill can withstand up to 4,000 RPM. The included drill adapter arbor is compatible with any standard drill. Toxic chemicals and skin irritating adhesives are not required, no need for dangerous and harmful chemical..
INSTRUCTIONS: Attach the included drill adapter arbor to your rubber wheel, apply light pressure to the top of the decal, working back and before until removed. Use a mild solvent to remove remaining glue and residue..
PACKAGE INCLUDES: 4" round decal eraser wheel * 1, drill adapter arbor for any standard drill * 1..
Convenient and easy to use, 100 percent brand-new.

Check Stock

KingTool 13pcs Buffing Wheels Set - 6pcs 6' Buffing Polishing Wheel with 1/2' Arbor Hole, Crimped Wire Wheel with 1/2'-5/8' Inserts, 3pcs Polishing Compound, 15' Buffing rake, 2pcs Microfiber Towel

...from rough to soft, fulfilled your any polishing purpose.3 Different Colors Polishing Compounds are made of high content of abrasive material, high hardness, strong grinding force, rapid polishing, high efficiency..
【Special Combo 2】: Include a Crimped Steel Wire Wheel Brush, diameter 0.3mm, thickness 1", with a plastic washer, arbor hole 1/2"-5/8", perfect for remove rust..
【Special Combo 3】: Include a 15" Buff rake for buffing wheels, the hard beech wooden handle plus the metal rake perfect to remove dry compound clean or dress buff wheel surface..
【Widely Application】: Widely used in Car, Jewelry, Hardware, Plastic, Glass and Metal, such as Brass, Stainless Steel, Aluminum,ect.Perfectly Used for Polishing, Cutting, Waxing, Cleaning, Repairing, Restoring, Reviving etc. Make your work easy and effortless, improve work efficiency..

Check Stock

VIKITON 4 inch Hole Saw with Arbor for Metal Wood Plastic, 102mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal

【Sharp and Durable】The hole saw is Bi-metal construction, which has special flexible steel saw body and high speed steel cutting teeth, with longer service life, and more sharp..
【Wide Application】The hole saw can be widely used for cutting thin metals, wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project..
【Easy to Use】Pass the pilot drill bit of arbor through the center circular hole on the back of the hole saw, and rotate the arbor until it is tightened..
【High Work Efficiency】The deep gullets on the sides of hole saw provides fast chip removal.
【Tool Kit Includes】4 in hole saw, 1 drill bit for replacement, 1 arbor(with 1 drill bit), 1 hex key.

Check Stock

Lenox Industries 30857-AA1 Hole Saw Arbor Adapter

The product is manufactured in United States.

Check Stock

VIKITON 1 inch Hole Saw with Arbor for Cutting Metal Wood and Plastic, 25mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

Longer Service Life: Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance.
Superior Versatile Performance: High speed steel sharp cutting tooth can effectively drills through metal , wood , PVC board , plastic and drywall , flat and smooth , high precision.
Easy to Use: Pass the pilot drill bit on the connecting arbor through the center circular hole on the back of the hole saw, and rotate the connecting arbor until it is tightened..
High Work Efficiency : The deep gullets on the sides of hole saw provides fast chip removal.
Tool Kit Includes: 1" hole saw, 1 pilot drill bit for replacement, 1 arbor(contain 1 drill bit), 1 hex key.

Check Stock

KATA 1-3/8" - 1-3/4" Door Lock Installation Kit for Wooden Doors with Guide Template,Door Lock Hole Saw,Carbon Steel

【Package Includes】1PC U-type adjustable plastic guide template,2PCS 1”(25mm) and 2-1/8”(54mm) hole saws,1PC arbor with drill bit.Depth of saw blade is 50mm..
【Professional Quality】Durable carbon steel made hole saws and arbor, reinforced plastics guide template..
【Easy Lockset Installation】The adjustable guide template for easy and exact drilling with snap-lock arms for selecting door width and backset.Complete installation in 4 easy steps.
【For Daily Use】Designed to fit the most common lock sizes in daily use and works well with wood doors.The adjustable plastic guide template fits 1-3/8-inch and 1-3/4-inch thick doors,fits 2-3/8-inch and 2-3/4-inch backsets.
【Lifetime Guarantee】Your satisfaction is the most important thing to us. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us in the first time..

Check Stock

Grizzly Industrial T26414-2 Ton Arbor Press

SWAG Off Road Arbor plates are cut out of high strength grade 50-A572 steel..
These arbor press plates are to replace the junk cast arbor plates that are prone to shattering..
Every SWAG arbor press plate is machined on both sides to remove mill scale and sharp edges..
7.00'' X 7.00'' X 1.00'' Ideal size for factory replacement of the 12 ton Harbor Freight cast arbor plates..

Check Stock

HHIP 3902-4020 1/2\ Expanding Arbor, 3\ Length

Tighten expanding screw so that arbor expands 005 inch.
Machine arbor to Length and Size required.
Position part on arbor and tighten expanding screw.

Check Stock

OEMTOOLS 26528 10 Piece Cut Off Wheel Set with Mandrel, Cutoff Wheel Mandrel Set, Premium Metal Cutting Wheels w/ 3/8" Arbors, Die Grinder Cut Off Wheel

Superior Cutting: Get the best means for cutting fiberglass, plastic, steel, and other ferrous metals with our angle grinder cut off tool.
The flathead notch on the mandrel adaptor makes fitting the air tool arbor cutting wheels into tight spaces easy.
Compatible Discs: Our cutting discs are great for use on die grinders, air cut off tools, and angle grinders.
Get clean burr-free cuts every time with our 3 inch cut off wheel.
Excellent Maintenance Tools: Cut through the metallic fluid or oil lines of your vehicles with ease using our air cutting wheel.
Stuck bearings, bolts, screws, and more are removable with the premium metal of our 1/32” thick cut off wheels.
Durable Materials: Get strength from our cutting wheels for metal.
These cutting discs are 1/32” thick for long term use and made of premium metals that work at a max RPM of 20,400.
Product Specifications: 10 piece 46 Grit 3” x 1/32” cut off wheels.
Cutting discs feature 3/8” arbor holes.
Mandrel designed to fit 0.625 to 1/32” thick cut off wheels.
Cuts fiberglass, plastic, iron, steel, and other ferrous metals.

Check Stock

76mm / 3 Inch BI-Metal Hole Saw with Arbor and Replacement Pilot Drill Bit, Hole Cutter for Easily Drilling Wood, Plastic, Thin Metal

This 3" Hole Saw Drill Bit is designed for wood / plastic cutting..
Non-binding clean edge design make the hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
It is made of M42 BI-Metal and High Speed steel, Durable and cuts clear.

Check Stock

EZARC Bi-Metal Hole Saw Kit, 7-Piece Hole Saws Set Cobalt Drill Hole Cutter with Mandrels for Sheet Metal, Wood, Drywall, Aluminum, Plastic Plate, Plasterboard

【Long-lasting & Durability】Professional high speed steel M42 (not M2) with 8% cobalt ensures more heat resistance of the teeth, This hole saw provides more than 50% longer lifetime on drilling various materials such as metal, hard wood, plastic and plasterboard..
【Efficient Plug Remove】Our metal hole saw kit with 3X sideling slot design can effectively remove plugs and increase operating speed..
【Fast & Clean Cutting】The 4/6 variable teeth configuration allow hole saw kit for metal and wood to provide clean and fast cutting in the most demanding applications..
【Hex Shank Arbor with Adapter】EZARC hex shank arbor with an extra adapter can fit all size metal hole saws from small to large diameters. The pilot drill bit is made of premium high-speed steel for precise positioning and rapid drilling for longer service life..
【Complete Hole Saw Set】5pcs M42 Bi-metal hole saw: 7/8’’ (22mm), 1’’ (25mm), 1-1/8’’ (29mm), 1-1/4’’ (32mm), 1-1/2’’ (38mm) to meet needs of different situations. 1 x Mandrel with Adapter and 1 x Plastic Case for easy storage. The maximum cutting depth is 1-7/8" (48mm)..

Check Stock