Top Plaster Saw Reviews

HLOFIZI 4-3/8 Hole Saw for 4' Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock

  • LONG LIFE - Hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Open back design allows for quick and easy plug removal.
  • FAST EASY CLEAN CUTTING - HLOFIZI 4-3/8 Hole Saw for Recessed Lights allows for smooth cut hole in ceiling plaster and dry wall. Continuous rim for clean cut without chips or cracking the plaster.
  • PERFECT HOLE SIZE - Solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 4" can light fixture fits.
  • MULTI-APPLICATION - Perfect cut through drywall, plaster, lath and plaster, wood and stucco.This hole saw for plaster for any recessed light installation job.
  • Satisfactory Service: If our HLOFIZI Carbide Grit Holes Saw you received is defective or unsatisfactory. We sincerely apologize and will definitely send you the new ones in no time. We appreciate all your remarks and comments. They are the key tools to develop and improve our handmade and heartcrafted products.
Check Stock

HLOFIZI 6-3/8 Hole Saw for 6\ Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock, Green

  • LONG LIFE - Hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Open back design allows for quick and easy plug removal.
  • FAST EASY CLEAN CUTTING - HLOFIZI 6-3/8 Hole Saw for Recessed Lights allows for smooth cut hole in ceiling plaster and dry wall. Continuous rim for clean cut without chips or cracking the plaster.
  • PERFECT HOLE SIZE - Solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 6" can light fixture fits.
  • MULTI-APPLICATION - Perfect cut through drywall, plaster, lath and plaster, wood and stucco.This hole saw for plaster for any recessed light installation job.
  • Satisfactory Service: If our HLOFIZI Carbide Grit Holes Saw you received is defective or unsatisfactory. We sincerely apologize and will definitely send you the new ones in no time. We appreciate all your remarks and comments. They are the key tools to develop and improve our handmade and heartcrafted products.
Check Stock

BAOSHISHAN Cast Saw Blades for Electric Cast Cutter Plaster Saw 3 Pcs #1 BLADE

  • 3 Pcs #1 Blade will be sent if you order this option..
  • NOTE -- The blades of plaster saw are consumable..
  • SCOPE OF APPLICATION -- This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
Check Stock

Medical Electric Plaster Saw Cast Cutter Orthopedic Sports Medicine 110V 12500rpm/min one set of plaster saw

  • The electrical machinery uses the double insulation protective device, has guaranteed the safety of patient.
  • Anti-shock type, degree and protection against harmful into the liquid level points: medical saw is II type.B is common tyoe.
  • Divided by the work of system: medical electric plaster saw is running short.
  • The electrically operated gypsum saws through the saw blade swinging sawing gypsum, in use, even if the saw blade will contact the patient skin not to create cuts.
  • Scope of application: the orthopedic products for fixed reset, remove the plaster bandages used.
Check Stock

Medical Electric Plaster Saw Cast Cutter Orthopedic Sports Medicine 110V 12500rpm Plaster Saw set

  • Before use, check whether the formation of saw blade,missing teeth,mounting, installing the saw blade when the blade shaft to be fixed,embedded with the pull head axis position of the flat side, with the other nuts in front of the saw blade wrench removed, exit concave sleeve and saw blade,saw blade and then put the other tightly.check the motor ventilation road,should be kept clear to prevent foreign objects clogging.
  • When used,not used much pressure, when the blade got stuck in the plaster bandage,it should cut off the power slowly withdraw.not to open when the power switch off, easy to damage the motor..
  • The temperature of the motor housing using the increase over time,such as hot case temperature should be found to be suspended,wait to cool before using, or likely to cause motor overheating and burning..
  • When have abnormal sound, vibration is too large,please maintenance in time..
  • Should be wipe clean the plaster saw after operation, kept in dry places(relative humidity less than 80%, non corrosive gas environment)to prevent water and damage and stumble..
Check Stock

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

  • ...ide grit edge, ensuring perfect drilling performance and providing the fastest, most consistent and longest lasting cutting.
  • 【Recessed Lighting Hole Saw】The 6 3/8inch recessed lighting hole saw can drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
  • 6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
  • 【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
  • Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
  • 【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
  • Widely used in plate holes, household wood, galvanized pipe, gypsum board and other opening operations.
  • 【Package & Size】The package includes 1pcs 6-3/8Inch hole saw with 7/16” shank heavy duty a....
Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

  • 4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
  • Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
  • Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

Electric Plaster Saw Speed Adjustable Plaster Cast Cutter for Tearing Polymeric Materials Plaster (110V Green)

  • Oscillating frequency is greater than 12500 times/min. Oscillating angle is 5 degrees..
  • This product is used for the removal of plaster bandage after fixed reduction. Suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • Operation of plaster: Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
Check Stock

Hand Book Journal Co Travelogue Drawing Journals 5 1/2 in x 8 1/4 in landscape ivory black [PACK OF 2 ]

  • Aluminum locking mechanism prevents the jab saw blade from being removed during use.
  • The jab saw has an interchangeable handle which holds a standard reciprocating saw blade..
  • The jab saw is ideal for flush-cutting applications or when a hacksaw is not available.
  • The TRI-FOLD jab saw is great for cutting drywall, plaster, wood, plastic and metal.
Check Stock

HLOFIZI 2-1/2 Inch Carbide Grit Hole Saw Diameter 2.5\ Cutting Through Stucco, Brick, Plaster, Cement Board, Drywall, Hardie Board, Hardwood, PVC with 1-1/2\ Depth, Up to 6X Faster

  • 2.5” hole saw constructed with long-lasting tungsten carbide grit edge, easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Drilling holes through lots of abrasive materials, stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: 7/16" shank, fit 1/2" chuck.
  • Not recommended for cutting metal sheet, concrete block, cement tile.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 2-1/2” carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

2 inch Carbide Grit Hole Saw, 1-1/2 Inch Cutting Depth for Brick, Concrete Block, Stucco

  • 【PACKAGE】This Carbide grit hole saw kit includes 4 3/8 Inch(111mm) Black SAW BLADE, 1 SDS PLUG MANDREL, 1 DRILL BIT, and 1 CARBIDE TIPPED PILOT DRILL BIT to satisfy your different needs.
  • 【UNIVERSAL APPLICATION】This Carbide grit hole saw is your ideal choice for brick, concrete block, fiber cement siding , backer board, stucco & old plaster.
  • 【EASIER TO CUT】Carbide grit hole saw cuts through a wide range of abrasive materials.
  • 【100% Satisfaction Guarantee】We are dedicated to providing every customer with satisfying products and services.If you are not satisfied with our product, we will provide a free return or refund for you.
Check Stock

4 Pcs Stainless Steel Cable Saw Metal Wire Saw Hand Pocket String Rope Saw Emergency Survival Saw PVC Pipe Cutting Tool for Wood Camping Hiking Hunting Red Black 23.62 Inch

  • Aluminum locking mechanism prevents the jab saw blade from being removed during use.
  • The jab saw has an interchangeable handle which holds a standard reciprocating saw blade..
  • The jab saw is ideal for flush-cutting applications or when a hacksaw is not available.
  • The TRI-FOLD jab saw is great for cutting drywall, plaster, wood, plastic and metal.
Check Stock

GoSports 6\ Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole Boards

  • CONSTRUCTION GRADE: Heat treated carbon steel alloy 6 inch hole saw blade, non-binding clean edge design.
  • PROFESSIONAL CUTTING: Hole saw cuts smooth and even 6 inch diameter holes through wood, drywall, plaster and thin metal.
  • PROJECT TOOL: Built tough for repeat use and handy for working on cornhole boards, air ducts, ceiling lights, speakers and more.
  • DIY READY: Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" or 1/2" drill.
Check Stock