Top Plaster Ceiling Board Reviews

Masonry & Stucco Paint, Black, 1 gal.

  • Price For: Each Coverage: 200 to 300 sq. ft./gal. Finish: Semi-Gloss Dry Time Recoat: 4 hr. Item: Exterior Paint Application Method: Brush, Roll, Spray Size: 1 gal. Green Environmental Attribute: VOC Levels Meet SCAQMD Requirements.
  • Surface: Interior and Exterior Use on Masonry, Brick, Cement, Concrete Block, Cinder Block, Stucco, Wood, Hardboard, Aluminum, Fiber Board, Vinyl Siding or Trim, Plaster, New or Coated Acoustic Ceiling, and Previously Painted or Primed Metal Dry Time: 30 min. Paint Color Family: Blacks VOC Content: 16g/L Color: Black Country of Origin (subject to change): United States.
Check Stock

CondoMounts Heavy Duty 19-Piece 90lbs NO Stud Drywall or Metal Stud Mounting Kit for TV Frame TV No Gap Mount Mounting kit.

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • FRAME TV MOUNTING KIT : Perfect for Mounting Frame TV Mount directly on drywall without the need for studs. 3/16 screws fit frame tv NO gap wall mount..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • FULL PACKAGE- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
Check Stock

HLOFIZI 2-1/2 Inch Carbide Grit Hole Saw Diameter 2.5\ Cutting Through Stucco, Brick, Plaster, Cement Board, Drywall, Hardie Board, Hardwood, PVC with 1-1/2\ Depth, Up to 6X Faster

  • 2.5” hole saw constructed with long-lasting tungsten carbide grit edge, easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Drilling holes through lots of abrasive materials, stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: 7/16" shank, fit 1/2" chuck.
  • Not recommended for cutting metal sheet, concrete block, cement tile.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 2-1/2” carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • ...ned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
  • VIDEO INSTRUCTIONS & SUPPORT : Over 10 Videos to help you mount different items safely..
  • FULL PACKAGE : Hex Shank Drill bit, screws, washers are included so you DONT need to to buy them separately..
  • METAL STUD : Can be used for mounting on Metal stud walls.
Check Stock

HLOFIZI 4-3/8 Hole Saw for 4' Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock

  • LONG LIFE - Hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Open back design allows for quick and easy plug removal.
  • FAST EASY CLEAN CUTTING - HLOFIZI 4-3/8 Hole Saw for Recessed Lights allows for smooth cut hole in ceiling plaster and dry wall. Continuous rim for clean cut without chips or cracking the plaster.
  • PERFECT HOLE SIZE - Solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 4" can light fixture fits.
  • MULTI-APPLICATION - Perfect cut through drywall, plaster, lath and plaster, wood and stucco.This hole saw for plaster for any recessed light installation job.
  • Satisfactory Service: If our HLOFIZI Carbide Grit Holes Saw you received is defective or unsatisfactory. We sincerely apologize and will definitely send you the new ones in no time. We appreciate all your remarks and comments. They are the key tools to develop and improve our handmade and heartcrafted products.
Check Stock

Tabbed Lath Washer 1-1/4 Diameter Galvanized 1,000 Box

  • Used for the Attachment of Metal and Plastic Lath, Plaster Repair, Insulation Board, and Gypsum Sheathings.
  • 4 Keyholes for Bonding of Plaster and Basecoats.
  • 4 Tabs for Pre-Spotting Washer into Soft Material Such as Insulation Board.
  • Center Hole will Accommodate Screws to #12.
Check Stock

HLOFIZI 6-3/8 Hole Saw for 6\ Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock, Green

  • LONG LIFE - Hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Open back design allows for quick and easy plug removal.
  • FAST EASY CLEAN CUTTING - HLOFIZI 6-3/8 Hole Saw for Recessed Lights allows for smooth cut hole in ceiling plaster and dry wall. Continuous rim for clean cut without chips or cracking the plaster.
  • PERFECT HOLE SIZE - Solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 6" can light fixture fits.
  • MULTI-APPLICATION - Perfect cut through drywall, plaster, lath and plaster, wood and stucco.This hole saw for plaster for any recessed light installation job.
  • Satisfactory Service: If our HLOFIZI Carbide Grit Holes Saw you received is defective or unsatisfactory. We sincerely apologize and will definitely send you the new ones in no time. We appreciate all your remarks and comments. They are the key tools to develop and improve our handmade and heartcrafted products.
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

MicroPrimer™ is a water based penetrating quartz primer made in Italy exclusivly for Italian lime plasters Helps to create a bond between your plaster and wall.

  • WHAT IS VENETIAN PLASTER: Also known as “stucco Veneziano”, Venetian plaster is a wall and ceiling finish made from magnesium-grade dolomite....
  • THE ITALIAN DIFFERENCE: Many of the so-called Venetian plasters used today are synthetic plasters made by paint manufacturers OR thick paint. They are....
  • BENEFITS OF VENETIAN PLASTER: Authentic lime plaster, made with the highest quality of ingredients, will age gracefully, and will be an excellent....
  • GREEN BUILDING PRODUCT: FirmoLux is an all-natural, Green building product with 0-VOC’s, and LEED point qualified. Our Venetian plasters are....
  • TRUST FIRMOLUX: FirmoLux is an international distribution company with its roots in Italy. The plasters they import have been in production for....
Check Stock

Dunzy 150 Pcs 1 Inch Plaster Drywall Washers Metal Washers for Screws Plaster Repair Rings Plaster Buttons Profile Washer Flat Washers for Wall Ceiling Drywall Plaster Repair

  • Sturdy Material: the plaster washers are crafted with steel and with zinc plated, and drywall screws are made of steel, which are sturdy and well made, and can serve you for a long time.
  • Size Details: the plaster repair washers are about 1 inch in outer diameter, 5/32 inches in center hole, and screws are 1 inch in length, appropriate size for you to use.
  • Complete Set: the package comes with 150 pieces of plaster repair rings in silver and 150 pieces of drywall screws in black, enough quantities and a nice set can meet your daily use needs, also can be kept as spare for accidental use.
  • Helpful and Required: you can use these plaster buttons to fix the plaster against the lath, which can avoid sagging and cracking, maintaining your wall and ceiling in good condition.
  • Toolbox Essentials: coming with small size and lightweight, the metal washers and screws can be easily stored in your tool cabinet, occupying a little space, convenient for you to take out as needed.
Check Stock

Hole Pro X-230+ 1-7/8 to 9-1/4 TWIN BLADE ADJUSTABLE Pro Hole Saw Cutter Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Includes Tungsten Carbide & HSS blades

  • SHIPS WITHIN ONE BUSINESS DAY from our NV warehouse.
  • TWIN blades for faster/smoother cutting, strong shield traps dust.
  • 11" OD - Adjusts infinitely for holes 2" to 9-1/4", Shield turns drill into portable drill press to use anywhere.
  • UNIQUE 5/8” threaded shaft tip to QUICKLY MOUNT CARBIDE GRIT holes saws.
  • Sturdy Carry Case and replaceable blades: Cut plywood (MAX 8" DIA), sheetrock, plaster, veneers, cement board, ceiling tiles, T&G.
Check Stock

Duct Outlet 12\ x 12\ Ceiling Box, w/ 12\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 12" Round Duct to a 12" x 12" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock

Duct Outlet 12\ x 12\ Ceiling Box, w/ 10\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 10" Round Duct to a 12" x 12" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock