Top Plasma Generator Reviews

Plasma Cutter,50 amp Plasma Cutting Equipment,Dual Voltage Metal Cutter,Portable Plasma Cutter Machine,High Frequency 50/60Hz 1/2-inch Clean Cut,110/220V Digital Display CUT50D

  • ✅Plasma Cutter,cut50d is made basic at high quality electronic components. Adopt advanced IGBT inverter soft switch technology,also with digital current display,Using Pulse-Width-Modulation (PWM) technology, the inverter power supply generates powerful DC welding currents..
  • ✅Automatic Dual Voltage / Dual Frequency (110 V/220 V 50/60Hz),if you have a generator power supply, please ensure that the generator is not less than 6000w..
  • ✅It is recommended to choose 50A circuit breaker protection when your power supply voltage is 110V, and 30A circuit breaker protection when 220V..
  • ✅The cutting thickness is 12mm 65psi under 220V, 8mm 50psi under 110V in good performance. Severance cutting thickness can reach at 16mm if needed for a slow run..
  • ✅The cut50d is an excellent choice for home DIY jobs and light duty small business projects.Compare with oxyhydrogen cutting, plasma cutting is much more safefy, quick, low cost and easy to use..
Check Stock

Mega Construx Halo UNSC Marine Defense, Multi Color

  • 4 highly detailed, super-poseable micro action figures.
  • Factions include 2 UNSC Marines and 2 Covenant Drones.
  • Buildable environment with display rods to pose your Drones midflight.
  • Figures come with interchangeable armor and SMG, Battle Rifle, Plasma Pistols, and special 10th anniversary gold Bubble Shield Generator.
  • Collect and combine with other Halo construction sets by Mega Construx.
  • Build your Halo Universe, and Build Beyond!.
Check Stock

ABESTORM Ion-200 Ion Machine, Negative Ion Generator Can Efficient Neutralization of Unpleasant Odors, with Highest Output - up to 30 Million Negative Ions/Sec, 2 Million Positive Ions/Sec for Rooms, Cars and Pets Dander

  • ✔The Ion-200 ion generator is used to neutralize odors in closed rooms. Maximum output - up to 30 million negative ions/second and 2 million positive ions/second. It can crack even the most stubborn odor molecules and can be used in occupied rooms.
  • 【Efficient Degradability】 The odor neutralizer effectively removes toilet/kitchen odors, smoke odors, and odors left after a fire.The negative ion generator converts the oxygen in the room air into singlet oxygen (O2). The odor molecules are then oxidized and degraded.
  • 【Timer Design】 Up to 180 minutes timer switch can be set. If you need to run for a longer time, turn Ion Machine counterclockwise to "ON" mode, the machine will work, ideal for car, home, basement, bathroom, kitchen, boat, attic, basement, bedroom, industrial or commercial use, even hunting, on vacation, travel, anywhere you need to clean air.
  • 【More Features】 Portable magnetic frame design, energy saving, small and light, easy to install and remove. Our plasma machine is equipped with an anti-mosquito soft magnetic sticker net, which can filter out large particles of dust in the early stage of air purification. At the same time it is very energy efficient. A 30m3 room, plasma machine 20W, ultraviolet machine more than 200W, s....
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock

WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

WeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

SL40 Plasma Torch Electrode 9-0096 fit SL40 Plasma Torch Thermal Dynamics Cutmaster 42 Plasma Cutter Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WeldingStop 9-0094 9-0096 SL40 Torch Plasma Electrode Tip fit Thermal Dynamics Cutmaster 42/12+ Plasma Cutter SL40 Plasma Torch Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

Forney Easy Weld 251 20 P Plasma Cutter,Green, 20 Amp

  • CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4"* (6.35 millimeters) with ease! *(Mild Steel).
  • EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze.
  • DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts.
  • LIGHT AND PORTABLE- Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible.
  • RUGGED- All metal case. Built to take the day to day.
  • MACHINE INCLUDES- Includes a 13' cutting torch, 8' ground clamp, 20A-15A adapter, 1 additional electrode and 1 additional nozzle. Backed by a 12-month warranty.
  • PRODUCT SPECIFICATIONS- Dimensions: 15.125" (384.18 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters) Weight: 21.5 lbs. (9.75 kilograms) Air compressor capable of 1.5 CFM is required (not included).
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

Shopcorp 12VDC Plasma Ion Generator – Negative Ionizer for Refrigeration, Air Purifiers and Air Sanitizers

  • HIGH QUALITY MANUFACTURING: DC 12V input plasma generator, model TFB-YD12102DJ1, which produces negative ions with a constant and reliable density. Made with high quality materials and manufacturing process to provide an optimal product. Replacement part for air ionization devices.
  • VARIED APPLICATIONS: Used in Laboratories, Clean Rooms, or Home, on a variety of devices such as air purifiers, air conditioners and any other application that requires a static field. Employed in refrigeration systems.
  • HEALTH BENEFITS: The presence of negative ions, or anions, improves air quality by attaching themselves to the positively charged particles, becoming too heavy and falling to the floor.
  • RELIABLE OUTPUT: Concentration of >1 million negative ions/cc at 15 cm from emitter. Negative voltage output of -7.5±0.5KV.
  • FULLY TESTED: Tested for optimal usage and conservation conditions to provide the best performance and functionality and reach the technical requirements of any system. OTHER SPECS: Working current of .
Check Stock

WeldingStop Standoff Guide 9-8281 for Thermal Dynamic Cutmaster 38/52/82/102/152 Plasma Cutter SL60 SL100 Torch Consumables

  • The Standoff Guide 9-8281 used for Drag cutting.
  • the Standoff Guide 9-8281 need work with shield cap 9-8218.
  • The Plasma Standoff Guide can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Standoff Guide can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • The standoff guide are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

Plasma Torch Electrode Tip Drag Shield for Miller Spectrum 875 Cutter ICE-60T/TM 25pcs

  • 25pcs ICE-60T plasma torch consumables can fit Miller Spectrum 875 plasma cutter machine.
  • CAN NOT fit Spectrum 875 plasma cutter XT60 torch.
  • Plasma electrode x 10pcs, reference code 212724.
  • Plasma tip / nozzle x 10pcs, reference code 219676.
  • Plasma drag shield x 5pcs, reference code 212730.
  • This is ICE-60T plasma cutting torch aftermarket replacement item which manufactured by WS,not original.
Check Stock