Top Plasma Equipment Reviews

SSLine Rolling Welder Cart Plasma Cutter MIG TIG ARC Welding Cart with 4 Drawers and Wheels Heavy Duty Steel Welding Trolley Universal Storage -100lbs Weight Capacity

  • 【Fast Delivery】-This Plasma Cutter will be shipped from US directly within 3-7 days arriving in normal.
  • 【Heavy Duty Design】-This welding cart is made of high quality steel with stunning and fine black finish, which is rust & corrosion resistant and can provide a long-term use.
  • 【4-Drawer Design】 -Featured with 4 draws that provides ample space to easily store tools and equipment.
  • Tilted top shelf for easier access to welder controls, and a spacious rear shelf with 2 safety chains to secure the gas cylinder.
  • 【Easy Maneuverability & Mobility with Wheels】- Equipped with two rear wheels and two swiveling casters, the welding cart can be easily pushed or pulled with top handle even though heavy tools or equipment are put on it.
  • 【Multi-purpose Welder Cart】 -It's perfect for transporting and storing most MIG, ARC welding machine, plasma cutter, as well as plenty room for hoses, welder's helmet and welding accessories.
  • Suitable for use in home garage, workshop, repair shop, and more.
Check Stock

Lab Benchtop Centrifuge Machine Large PRP Centrifuges 10ml/15ml *6 Capacity,500-5000rpm(Max. 3074xg),Digital Display w/Timing

  • Digital plasma centrifuge for up to 6 of 15ml tubes .Speed can be adjusted from 500-5000rpm,max relative centrifuge force is 3074xg.Timing Range is 10s~99min59. The LCD display with ability to change between RPM and RCF can show time and speed at real-time, more conducive to the observation of samples..
  • This centrifugadora de plasma is with short time centrifugal function. Short spinning is possible as long as the SHORT button is held down.No need to set the speed and time . With Intelligent electronic lock automatically open the cover after the machine runs, without manual pressing..
  • The aluminum alloy rotor of this prp centrifuge machine is calculated as an optimized design,it has the advantages of light weight and high speed .Hollow soundproof cover,fully absorb noisy,quite operation. Perspective window can directly observe the operation.
  • Powerful sucker hold the table firmly,make this low speed laboratory centrifuge run smoothly..
  • JOANLAB centrifuge plasma prp machine is widely used in Widely used in clinical medicine, analytical laboratories, biology, genetic engineering, immunology, etc..
  • Directly from manufacturer-JOANLAB is a professional laboratory equipment manufacturer.One year warranty with professional customer support..
Check Stock

Biltek Plasma Cutter 50A Dual Voltage 110V/220V Cutting Torch Kit, 1/2 Inch, IGBT Technology, Portable Plasma Cutter Machine, Metal Cutter for Steel, Copper, Aluminum, Brass, Other Metals + 250V Plug

  • ...taining) And Non-Ferrous Materials. A Must-Have Home Improvement Machine! Not Only Can You Cut Metal, You Can Also Bevel, Gouge, Mark, And Even Weld! No Other Tool In Your Metalworking Arsenal Is So Flexible..
  • [AUTOMATIC DUAL VOLTAGE- 110/220V [50/60 Hz] The Plasma Cutting Equipment Comes With A Pre-Attached 110V Plug That Can Be Switched With a 220V Plug (Included) for Even More Cutting Power! Connect the Plug to the Power Source and the Machine Automatically Switches To the Correct Input Power! No External Conversion Plug Required. Additionally, Our Metal Cutting Machine Is Equipped With A Powerful And Advanced 50AMP DC Inverter.
  • Making It Capable Of Reaching Even Higher Cut Specs..
  • [SAFE FOR AT-HOME USE & EASE OF USE ] One of The Most Important Features Of Our Metal Cutting Torch is That it Uses Non-Hazardous Compressed Air To Cut Metal Which Is Far Safer Than The Acetylene, Propylene, And Other Flammable And Volatile Gases Used In Oxy-Fuel Cutting Processes. Are You Unsure Of What To Do With The Machine? Don't Worry At All ! This Plasma Metal Cutter Is Very Easy To Assemble, Set-Up And Use Even For a First-Time User..
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock

WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

WeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

Weiman Disinfecting Electronic Cleaning Wipes For Keyboards Tablets E-readers Smart Phones Netbooks and Touchscreens 30 Wipes

  • Anti-static formula safely cleans valuable electronic equipment.
  • Dries quickly while leaving a clean, clear surface.
  • Remove dust, dirt, and fingerprints from all your screens and accessories.
  • Recommended for smart phones, tablets, TVs (LED, LCD, plasma), monitors, laptops, computers, keyboards, audio equipment and speakers.
  • Streak-free, lint-free, and ammonia-free, this formula keeps your electronics in pristine condition.
Check Stock

50Amp Plasma Cutter Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110/220V CUT55P 50A Plasma Cutting Equipment, DC Inverter Portable Plasma Cutter Machine, IGBT Digital Display 1/2 Inch Clean Cut

  • Pilot arc: our cut55p is pilot arc plasma cutter machine and equipment the P-80 plasma cutting torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag.
  • Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life..
  • Outstanding cutting performance: the DC inverter cutting machine suitable for cut stainless steel, alloy steel, mild steel, copper, and aluminum. Designed for both demanding DIY and outdoor work, or home and hobby use..
  • Equipped with IGBT technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. IGBT machine is far superior and more stable than the MOSFET machine. Can effectively save 30% of energy..
  • 12mm Cutting thickness: Ideal cut thickness 1/2" (12mm), automatic dual voltage / dual frequency (110V/220V 50/60Hz). Voltage compensation to tackle with +/-15% electricity fluctuation. In addition our machines provide plugs that require manual installation..
  • What you get: cut55p x1, p80 plasma torch & accessories, user guide, 12 month guarantee..
Check Stock

SL40 Plasma Torch Electrode 9-0096 fit SL40 Plasma Torch Thermal Dynamics Cutmaster 42 Plasma Cutter Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WeldingStop 9-0094 9-0096 SL40 Torch Plasma Electrode Tip fit Thermal Dynamics Cutmaster 42/12+ Plasma Cutter SL40 Plasma Torch Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

Furman AC-215A Compact Power Conditioner with Auto-Resetting Voltage Protection - Black

  • Furman's exclusive SMP Technology provides the highest level of surge & spike protection available..
  • LiFT offers linear AC power filtering to ensure clean power for unequaled audio & video clarity.
  • Auto-Reset EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.
  • Compact chassis design easily attaches to any flat screen television mount or any other remote location.
  • From the #1 brand in professional power conditioning. Perfect for plasma/LCD TVs, projectors, home recording, DJ equipment, pro audio rigs and home entertainment systems..
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

Hot Max WC100 Welding/Plasma Cutter Cart

  • All steel construction with durable finish.
  • Extra storage tray for accessories and equipment.
  • Includes safety chains for shielding gas tanks.
Check Stock