Top Plasma Arc Cutting Equipment Reviews

Plasma Cutter 110&220V 45Amp 1/2\ Clean Cut 3/5'' Max Cut Plasma Cutting Machiner,HF IGBT Inverter Portable Plasma Cutting Equitment for Aluminum Alloy Mild Steel Cast Iron

  • ...rials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition.With IGBT inverter technology, It is long life and efficient higher than most machine. It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • ✅【Cutting Thickness】20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation..
  • ✅【Wildely Application】This plasma cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work,repair/maintenance,metal processing,manufacture ect,lightweight and portable,also suitable home DIY and industrial projects ..
  • ✅【Setup Simple】Automatic Dual Voltage Transfer / Dual Frequency (110/120 V 220/240 V 50/60Hz),With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional. Air post time adjust function, the adjustment range is 1-15seconds ,this function allow user adjust the time for post air to cool torch head effectivel....
Check Stock

Lotos CP243 Extended Plasma Cutting Torch for RED Color LTP5000D with 3-Prong Switch Connector 24 ft

  • 24Ft long pilot arc plasma cutting torch plasma cutting torch for RED Color LTP5000D.
  • NOT Compatible with BROWN Color LTP5000D.
  • One set of consumables is installed (1 nozzle, 1 electrode, 1Cup).
  • The compatible consumables for this torch are Loots PCON 20, PCON40, PCON90..
  • Can only be used for LOTOS pilot arc plasma cutter LTP5000D.
Check Stock

Reboot Plasma Cutter IGBT Inverter 40 Amps RBC-4000 AC 110V Air 1/2 Cutting Plasma Cutting High Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron Chrome-Blue

  • Pilot Arc Function,Plasma cutter pilot arc 50Amps with pilot arc function,Very easy to cut Rust/Dust/painted metal. It is made of high quality....
  • Pilot arc Plasma Cutting machine 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 240v, 18mm max cutting thickness, 12mm quality cutting....
  • Machine with current display, Also with air post time adjust function, the adjustment range is 2-15 seconds ,this function allow user adjust the time....
  • Accessories come with machine, 4M Pilot arc AG60P cutting torch, Earth clamp with 2.5M cable, 5 pcs tips, 5 pcs electrodes, 2 meters air hose, 4 pcs....
  • Two years warranty for this machine, the buyer can get free service within two years if machine have any problems.
Check Stock

PrimeWeld Pilot Arc 50A Plasma Cutter 200A TIG/Stick Welder Combo Multipurpose Welding Machine for Home or Jobsite Use with 1/2-inch Clean Cut Plasma Cutter TIG Welder and Stick Welder CT520DP

  • 3-IN-1 PLASMA CUTTER/WELDER COMBO: Combines plasma cutting, TIG/stick welding and Pilot Arc welding functions in one convenient and versatile unit.....
  • TIG WELDER PLASMA CUTTER COMBO: Multipurpose welding machine can cut all types of metals up to 1/2-foot thick with the 50-Amp plasma cutting function.....
  • PORTABLE ARC PLASMA CUTTER: At only 32 lbs., it's ideal for home or jobsite use. Has a 60% duty cycle at max amps for all functions, AC 110/220±15%.
  • VERSATILE WELDING, CUTTING MACHINE: Cuts many metals including stainless steel, aluminum, titanium, cobalt, nickel alloys and cast iron. Includes....
  • GREAT CUSTOMER SERVICE: Backed by a 3-year warranty, we're committed to after-sales service. When you contact us, you speak with real technical....
Check Stock

Plasma Cutter 50 amp 110/220V Non-Touch Pilot Arc 1/2 Clean Cut Automatic Dual-Voltage IGBT High Frequency Inverter Portable Air Plasma Cutting Machine,CUT50DP

  • ★NON-TOUCH PILOT ARC: Cuts rough,painted,rusty surfaces efficiently but produces minimal slag.Cut without touching the metal,better cutting quality....
  • ★CUTTING EFFECT : The plasma cutter with high cutting speed,cutting smoothly.10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance....
  • ★USE WIDELY: Safe design,suitable cutting for Stainless Steel, Alloy Steel, Mild Steel, Copper, thin Aluminum, etc. It is HF arc starting plasma....
  • ★HIGH QUALITY ACCESSORIES: Use better air regulator and wearing parts include AG60 pilot arc torch, work with standard parts, you easy to find the....
  • ★SATISFACTION GUARANTEED:Offer 30-days refund/replacement and 1 year warranty,customer care team is always ready to help when you need, and provide....
Check Stock

Pilot Arc Plasma Cutter 50A Dual Voltage 110/220V Non-Touch Plasma Cutter Cutting Machine Air Inverter DC 1/2 Inch 12mm Clean Cut With Upgrade P80 Cutting Torch Plasma Cutting Equipment

  • Pilot Arc Non-touch Plasma Cutter Machine: The pilot arc cutting machine can effectively cut through rough, painted, and rusted surfaces and produce the least slag. The pilot arc technology allows you to cut without touching the metal. So it provides a better cutting quality and longer life for consumables..
  • Upgrade IGBT Technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. At the same time, it can effectively save energy and improve the life of the machine..
  • 50Amp Dual Voltage 110/220V Machine: Output Current [email protected].
  • [email protected] and effective cutting thickness: 1/2 Inch (12mm).
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz).
  • Dimensions: 15.7" X 10.2" X 13.4" (40*26*34 CM).
  • Wide Application: The plasma cutter CUT50P suitable for cut aluminum, stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials. Designed for both demanding industrial and construction work, or home and hobby use..
Check Stock

Welding Manual Haynes Techbook

  • Oxy-acetylene welding, heating and cutting.
Check Stock

Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI (CUT50D 120/240V)

  • Plasma Cutter, 120V/240V 50A plasma cutter with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • Plasma cutting machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumable's working life.
  • Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A.
  • Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm.
  • Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine.
  • The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room.
Check Stock

Amico PT31-13 13 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 13 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Amico PT31-25 25 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 25 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Amico PT31-15 15 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 15 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Amico PT-31-20 20 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 20 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

LOTOS CP133 3 Pin Plug Pilot Arc Plasma Cutting Torch for RED Color LTP5000D Plasma Cutter

  • ONLY work with RED Color Lotos LTP5000D. NOT Compatible with BROWN Color Lotos LTP5000D.
  • 13ft Long Pilot Arc Plasma Cutting Torch 3 prong end connector.
  • One set of consumables is installed (1 nozzle, 1 electrode, 1cup).
  • Can only be used for RED Color LOTOS pilot arc plasma cutter LTP5000D.
Check Stock