Top Pitch Pipes Reviews

prier C-434D12 Self Draining Residential Wall Hydrant

  • Drains automatically with hose attached and under pressure to prevent pipes from freezing and bursting.
  • downward pitch is built into hydrant, ensuring proper installation.
  • All cast brass construction, solid cast brass seat, body and valve stem cap.
  • solid brass stem ends use large diameter long wearing acme threads.
  • Satin nickel plated body, valve stem cap and vacuum breaker.
  • compact design handle is positioned to prevent interference between hose and operators hand.
  • Metal collar covers drainage holes and protects against insect nesting while closing under pressure, multiple vent holes ensure proper draining.
  • Cycle tested to simulate 25 years minimum service.
Check Stock

Woodford V22CP-10-MH 10\ Hot/Cold Frostfree Vertical Mount Faucet - 1/2\ MIP or Female Sweat Connection

  • CP inlets are 1/2 inch male pipe thread or 1/2 inch sweat. For use in maximum 10 inch wall thickness. Inlets are 5"apart on center. Overall length of the inlet pipes is 11 3/4" from tip to wall flange..
  • Faucet must be installed with downward pitch toward nozzle.
Check Stock

Garden Connector Adapter 30 Pieces Of Brass Female M22 M24 Male Threaded Connector 5/8\ Faucet Quick Connector For Bathroom Faucet Copper Fittings (Color : 4L/H)

  • Allows connecting and extending pipes or fittings of different sizes.
Check Stock

Garden Connector Adapter 30 Pieces Of Brass Female M22 M24 Male Threaded Connector 5/8\ Faucet Quick Connector For Bathroom Faucet Copper Fittings (Color : Plating silver)

  • Allows connecting and extending pipes or fittings of different sizes.
Check Stock

IPS CORPORATION 86249 Roof Flashing 3-in-1 with Elastomeric Collar, 3 x 12 x 15.4 inches, Steel

  • The roof flashing is compatible with 1-1/4 inch, 1-1/2 inch, 2 inch or 3 inch pipes.
  • Constructed of a durable galvanized steel base to prevent rust and cracking.
  • Features an elastomeric rubber collar that is resistant to ultraviolet, ozone and harsh weather.
  • Designed to direct water away from critical areas on the roof and prevent penetrations.
  • Compatible with any roof pitch up to a 45-degree angle.
  • Fits 1-1/4" or 1-1/2" 2" and 3" vent pipe.
  • Tested for ultraviolet ozone & weather resistance.
  • Galvanized base w/adjustable elastomeric collar.
Check Stock

#5 (4\ - 8\) DEKTITE RED Square Base High Temp Silicone - Flexible Pipe Flashing Boot - Dektite Pipe Flashing (DFE205RE)

  • Flashing Base is 12-1/4" by 12-1/4" - Pipe Boot Fits 4" x 8" Outside Pipe Diameter.
  • Continuous Service High Temperature Ranges of -58F to 392F (Silicone).
  • If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack.
  • Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents.
  • On a Roof with a 10/12 to 12/12 Pitch Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top.
Check Stock

uxcell Brass Fitting Connector Metric M10-1 Male to Barb Fit Hose ID 8mm 2pcs

  • One side is used to connect hoses while the other side is used to connect to metric female pipes..
  • The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way..
Check Stock

HALIGA Brass M12 Threaded Extension Rod for Pendant Light, Island Lighting, Chandeliers,Lighting Fixture downrods & Stems,12 Inches

  • ...sure it fits your product. Suitable Size: Suit for M12 thread. The length of the lamp extension rod is 12 in, the outer diameter is 0.531 in, and the inner diameter is 0.330 in(wires can pass through). The link threaded pipe length is 0.984 in and the outside diameter is 0.456 in(Suit for M12 thread.)and the thread pitch is 1mm . Please refer to the product map2 for more detailed size introduction..
  • Easy to install and splice: The package included 4 rods, and 4 threaded pipes for connection.Splicing according to the required length .Installation by threaded pipes screwing ..
  • The accessory can increase the installation height of the pendant light, chandeliers or island lighting fixtures.Note: This is NOT A LIGHT FIXTURE but an accessory for lighting fixtures.
  • With the tilt ceiling adapter, the pendant light can be installed on the Vaulted or Angled Ceilings. (The ceiling adapter needs to be purchased separately, and it is more favorable to purchase with it). Customer Service: If you have any question about item, please contact us by clicking on "sold by 'Haliga' "and then clicking on 'Ask a question' and telling us what's wrong about item, we will solve all problems for you..
Check Stock

HALIGA Matte Black M12 Threaded Extension Rod for Pendant Light, Island Lighting, Chandeliers,Lighting Fixture downrods & Stems,12 Inches

  • ...sure it fits your product. Suitable Size: Suit for M12 thread. The length of the lamp extension rod is 12 in, the outer diameter is 0.531 in, and the inner diameter is 0.330 in(wires can pass through). The link threaded pipe length is 0.984 in and the outside diameter is 0.456 in(Suit for M12 thread.)and the thread pitch is 1mm . Please refer to the product map2 for more detailed size introduction..
  • Easy to install and splice: The package included 4 rods, and 4 threaded pipes for connection.Splicing according to the required length .Installation by threaded pipes screwing ..
  • The accessory can increase the installation height of the pendant light, chandeliers or island lighting fixtures.Note: This is NOT A LIGHT FIXTURE but an accessory for lighting fixtures.
  • With the tilt ceiling adapter, the pendant light can be installed on the Vaulted or Angled Ceilings. (The ceiling adapter needs to be purchased separately, and it is more favorable to purchase with it). Customer Service: If you have any question about item, please contact us by clicking on "sold by 'Haliga' "and then clicking on 'Ask a question' and telling us what's wrong about item, we will solve all problems for you..
Check Stock

Wellsking 2 Pack 16'' Chainsaw Chains .325'' Gauge .050'' Pitch 66 Drive Links Full Chisel fits for：41, 45, 49, 51, 55, 336, 339XP, 340, 345, 346 XP, 350, 351, 353, 435, 440, 445 and 450e

  • Specification: 16-Inch chainsaw bar, Pitch: .325”, Gauge: .050", chain drive link count: 66 (The same saw can be equipped with different bar lengths. Please verify your parameters to ensure this chain works with your machine.).
  • Replacement for the part number 531300437 16-Inch H30-66 (95VP) and Fits: 41, 45, 49, 51, 55, 336, 339XP, 340, 345, 346 XP, 350, 351, 353, 435, 440, 445 and 450e.
  • Replacement for MPN Carlton K1C-066G, K1C-66E, H22 66, 531300437, 501840966, Windsor 50J66, Oregon 20BP066G, 20BPX066G, Echo 20BPX66CQ, 33SL66CQ.
  • Compatible with Jonsered Models: 110, 111, 2040 (.325 Pitch), 2041 (.325 Pitch), 2045 (.325 Pitch), 2050 (.325 Pitch), 2051 (.325 Pitch), 2054 (.325 Pitch), 2055 (.325 Pitch), 2063 (.325 Pitch), 2141 (.325 Pitch), 2145 (.325 Pitch), 2149 (.325 Pitch), 2150 (.325 Pitch), 2159 (.325 Pitch), 2163 (.325 Pitch), 2350, 435, 440 (.325 Pitch), 45, 451, 490, 51, 510, 52, 521, 525, 535, 590, 80, 801, 81, 90, 930, CS 2040 (.325 Pitch), CS 2147 (.325 Pitch).
  • Compatible with Jonsered Models: CS 2150 (.325 Pitch), CS 2152 (.325 Pitch), CS 2153 (.325 Pitch), CS 2156 (.325 Pitch), CS 2159 (.325 Pitch), CS 2163 (.325 Pitch), CS 2240 (.325 Pitch), CS 2245 (.325 Pitch), CS 2250 (.325 Pitch), CS 2252 (.325 Pitch), CS 2253.
Check Stock

8TEN Chainsaw Chain for Husqvarna 345 351 350 340 353 455 Rancher Jonsered 18 inch Bar .050 Gauge .325 Pitch 72DL (1 Chain)

  • Replaces OEM Part Numbers: Carlton K1L-072G, K1L-72E, GB J50C-1PL72, Windsor 50JL72, Oregon 20LPX072G, Husqvarna 501840872, H23 72, Stihl 23RS3 72, 23RS 72, 3637 005 0072, Echo 20LPX72CQ.
  • Fits Husqvarna Models: 133, 136, 137, 140, 141, 142, 154, 234, 235, 238, 240, 242, 246, 254, 257, 260, 261, 262 XP, 33, 336, 339 XP, 340, 345, 346 XP, 350, 351, 353, 36, 38, 40, 41, 42, 435, 44, 440,.
  • Compatible with Echo Models: CS-400EVL (.325" Pitch), CS-440, CS-440EVL, CS-450, CS-450P, CS-500P (.325" Pitch), CS-520, CS-530, CS-550P (.325" Pitch). Compatible with McCulloch Models: 2046AV,.
  • Compatible with Jonsered Models: 110, 111, 2040 (.325 Pitch), 2041 (.325 Pitch), 2045 (.325 Pitch), 2050 (.325 Pitch), 2051 (.325 Pitch), 2054 (.325 Pitch), 2055 (.325 Pitch), 2063 (.325 Pitch), 2141.
  • Compatible with Jonsered Models: CS 2152 (.325 Pitch), CS 2153 (.325 Pitch), CS 2156 (.325 Pitch), CS 2159 (.325 Pitch), CS 2163 (.325 Pitch), CS 2240 (.325 Pitch), CS 2245 (.325 Pitch), CS 2250 (.325.
Check Stock

8TEN Chainsaw Chain 18 inch Bar .050 Gauge .325 Pitch 72 Drive Links for Husqvarna Poulan Pro Johnsered 1 Chain

  • Replaces OEM Part Numbers: Carlton K1C-072G, K1C-72E, Husqvarna 531300439, 501840972, H22 72, McCulloch PMG320GX, Stihl 23RM 72, Windsor 50J72, Oregon....
  • Compatible with Husqvarna Models: 133, 136, 137, 140, 141, 142, 154, 234, 235, 238, 240, 242, 246, 254, 257, 260, 261, 262 XP, 33, 336, 339 XP, 340,....
  • Compatible with Poulan/PoulanPRO Models: 235, 240 (.325 Pitch), 325, 404, S35. Fits Echo Models: CS-3600, CS-3900, CS-4000, CS-4100, CS-440, CS-450,....
  • Compatible with Jonsered Models: 110, 111, 2040 (.325 Pitch), 2041 (.325 Pitch), 2045 (.325 Pitch), 2050 (.325 Pitch), 2051 (.325 Pitch), 2054 (.325....
  • Compatible with Jonsered Models: CS 2152 (.325 Pitch), CS 2153 (.325 Pitch), CS 2156 (.325 Pitch), CS 2159 (.325 Pitch), CS 2163 (.325 Pitch), CS 2240....
Check Stock

25cc Chainsaw 12 inch Gas Powered Top Handle Gasoline Saw For Cutting Wood with Tool Kit Garden Farm Home Small Chainsaw Wood Cutting Petrol Gasoline Chain Saw Wood Cutting Grindling Machine

  • ...st braking, wear-resistant chain, easy start and efficient operation.Displacement 25.4cm,Fuel:Mixture( Gasoline 25: Two-cycle oi 1) Fuel tank capacity 200ml,Chain oil:Motor oil SAE# 10W-30 Oil tank capacity 140ml,Ignition system is Pointless(cDl) Spark plug LD L8RTF,Oil feeding system:Automatic pump Sprocket(Teethx Pitch):6Tx3/8,Type:Sprocket nose Saw chain Pitch3/8in,9.53mm,Gauge 0.05in, 1.27mm.
  • The wrap-around handle feels soft and comfortable, which helps reduce user fatigue. Built-in steel bar spring, flexible and fast rebound, reduce starting resistance, the elderly and women can easily use.v.
  • 25 cc Chainsaw full crank 2 cycle engine provides greater power and less vibration, the engine speed can be up to 8500 rpm, can bear high temperature,0.9kw 1.2hp power motor offers a consistent performance. Its gas motor roars to life with the squeeze of a trigger.Cord retainer prevents unintended power disconnection.Just plug Chainsaw and you have a powerful chainsaw that works as well as a gas chainsaw.The high-quality steel blade and motor make short work of most cutting jobs..
Check Stock