Top Pipeline Gas Regulator Reviews

TeeJet 23120-3/4-PP Pressure Regulator with 200 PSI Pressure Gauge (Bundle, 2 Items)

Gas Type- 2 Positions, LPG 10" W. C & NG 4" W. C, Max inlet pressure PSI: 1/2 (3.5KPa), Gas Flow: 120,000BTU/ Hr. Adjustable outlet pressure 4" &10" Water Column..
Fitting- in 1/2" x out 1/2" NPT Pipe threads. When apply to LP gas, it needs to work with an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator..
Safety - Our Pressure Regulators Pass CSA certificate for your safety. no gas leaks, ensures safety while using grill, air flow is kept stable and at appropriate levels..
Applications- Stable Gas flow, for Natural LP Gas grills, heater, oven, Gas Welding Equipment, NG gas pressure regulator.
Please take the Hex Screw out to check it's the correct side for your application. LP side and NG side is different. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator..

Check Stock

Aupoko Natural Gas Conversion Kit for Grill 10FT 1/2 ID Natural Gas Quick Connect Hose Natural Gas Regulator 1/2 Quick Connect Disconnect Adapter 3/8 Fitting Convert Propane to Natural Gas

【Natural gas to propane conversion kit】The propane to natural gas conversion kit includes 5.9-inch natural gas regulator hose adapter, 10-foot....
【Two gas regulation modes】5.9" manifold gas regulator hose kit. Note: The original mode of the regulator valve is the propane gas regulator valve....
【CSA certification hose】10 feet 1/2" ID natural gas quick connect hose, Equipped with 1/2" female pipe thread to 1/2" female quick connect....
【Compatible with】Natural gas hose and regulator kit, perfectly suitable for most models of KitchenAid brand gas grills, such as 720-0709,....
【Aupoko service】Customer's satisfaction is our greatest pursuit. If you have any problems during the purchase or use, you can contact us at any....

Check Stock

Argon CO2 Regulator Gauge Welding Gas Regulator with 6.6Ft Gas Hose CGA580 Inlet Connection 0-4500PSI/0-10BAR Input Pressure

【CGA-580 Connection】The Argon regulator with CGA-580 Inlet Connection fits standard Argon, CO2 Gas Tanks from any supplier. The gas regulator is a standard pressure control valve that reduces the input pressure from gas stored in a tank.
【Accurate Pressure Gauge】Input pressure: 0-4500PSI. The Argon CO2 Regulator has two Easy to read pressure gauge, the argon flow meter provides accurate measurement of gas. And it has Internal safety pressure relief design to protect you form danger..
【Brass Material】Our welding gas regulator is made of solid brass, so the surface can keep a good looking for a long time. Precision thread design ensures high sealing performance and avoids gas leakage..
【General Feature】A 6.6Ft gas hose ensures your tanks at a safe distance from your Mig Tig welding projects, 5/8'' Female and 9/16" male outlet connection. And the filter structure at the CGA-580 connection effectively prevent debris in the argon tank entering the gauge with the airflow..
【Application】Our welding regulator is pefect for MIG and TIG welding. It is an economic alternative for you to get more precise gas metering, like the accurate reading of argon regulator would help you to adjust pressure before welding..

Check Stock

BMMXBI Griddle Regulator Fit Blackstone 17/22 Inch Tabletop Griddles Gas Regulator for CharBroil 19952085 Blue Rhino Razor Griddle Pit Boss PB336GS

✅ PACKAGE: Include 1 pcs Grill Regulator, replacement for grill Regulator. You don't have to look around for replacement parts anymore. It's the best gift for who love barbecue. This is perfect fits for your grill..
✅ FITS: Gas Regulator Gas flow 25000BTU/hr, outlet pressure 11"W.C, more safe and stable. Please kindly make check the SIZE and MODEL of your original parts and compare with ours BEFORE purchasing..
✅ PERFECT FITS: Gas Regulator replacement for CharBroil 19952085 22-inch 2-Burner Tabletop Gas Griddle. For Pit Boss PB336GS 2 burner and Blackstone 17/22 Inch Tabletop Griddles. It is the perfect replacement for the gas regulator of your grill..
✅ MATERIAL:Gas regulator is made of high quality stainless steel and 100% Solid brass with leak-resistant air pipes. Lightweight and durable. Easy to install without tools, make your griddles work better, years of regular use. Measure your original part to ensure you get the right part. You don't need to waste unnecessary expenses to frequently replace parts..
✅ ORDER NOW: So why wait? It's the bes....

Check Stock

OYHBO Argon/CO2 Flow Meter Gas Regulator Guage for TIG MIG Welder Welding Gas-saving CGA580 Inlet

✔CGA580 Inlet Fitting - This gas regulator can be used with standard Argon/CO2 gas tanks. You can connect the welding hose via male 5/8UNF-18RH fitting. Easy to install. Works well on tig, mig welders..
✔High Precision - The gas regulator gauge is easy to read from 0-3500psi, the output flow is adjustable from 5 to 60 scfh, and is indicated by a ball which moves up and down in the flow tube..
✔Gas-saving & No Leaks - With a Gas-saving feature(normally can save 35%-65%), our argon regulator for welding is more economical and practical than others on the market. Two-stage pressure relief structure ensures fast and stable transmission without leaking. There is a sound warning like whistling when over pressure and leaking during use, make your welding more safer..
✔Heavy Duty&Rust-proof - Our Argon CO2 Gas Regulator features heavy duty brass body, which can withstand harsh environments. Its base is made of qualified aluminium alloy, not get rusty and longer using-life..
✔Ideal for TIG/MIG Welding - Our argon flow meter gas regulator is accurate and efficient by professional design, ideal for TIG/MIG welding, cutting, chemical and electronics industry. If for any reason you're not 100% SATISFIED, please let us know. We will provide you with the best....

Check Stock

iSpring 14702 APR40 Pressure Regulator Filter Protection Valve with 1/4\ Quick Connect, 40 Psi, white

GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 4" - 8" Water Column.
PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as 13/16 inch..
CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16"..
MARKING - Model: RV47L, Marking: 1/2 PSIG, Po 4" - 8". Inlet pressure 1/2 PSI. Adjustable outlet pressure 4" - 8" Water Column..
OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Overall Dimension: 2-7/8” W x 2-1/4” D x 2-1/2” H. This is a small size regulator. Refer to pictures for detailed dimensions..

Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

【Hight Quality & Sturdy Argon Regulator with Hose】Argon flow gauge regulator's body is made of high-quality brass, being sturdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one u....

Check Stock

MRbrew Efficient Adjustable Beer Faucet Kit, Adjust/Control/Regulate Beer Flow Rate, Heavy Duty Commercial Brewing Kegging Stainless Core Adjustable Draft Kegerator Keg Tap Kit for Beer Tower Shanks

1.Include: Beer Keg CO2 Regulator CGA320, Red Gas Line, Worm Clamps, 5/16" Swivel Nuts, Ball Lock Gas Disconnect MFL.
2.Material: PVC Material for Gas Line, Stainless Steel Material for Clamps, CO2 Regulator and Swivel Nuts, Plastic Material for Ball Lock Disconnect.
Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
4.Gas Gauge: 0-60 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator.
5.Guarantee: Quality Guarantee, any problem for CO2 Regulator with ball lock and gas line set, Money Back or Replacement free..

Check Stock

Vertical Two Stage Propane Regulator with POL and Gauge, 2 Stage Propane Regulator Standard 3/8 Female NPT Connection, Double Stage Regulator for 20-100lb Tank，Gas Grill, RV, Propane Heater…

【Two Stage Propane Regulator】Double propane regulator is newly upgraded. 2 stage regulator ensures that the inlet pressure of propane flowing to the first stage and the second stage is consistent. Dual propane pressure gauge can detect leakage and read the propane oil level and confirm again that there is no propane leaked, safer to use.
【Inlet and Outlet】2 Stage Propane Regulator Inlet: Standard POL Tank Link.
Outlet has an Internal 3/8" female NPT, Maximum BTU 16,000 BTU/Hr Capacity.
【Widely Application】2 Stage Propane Regulator is made of 100% solid brass to provide secure and sealed connection between application equipment and propane tank and solved the problem of gas leakage.Dual propane regulator with Gauge for gas grills, RVs, generators, stoves, heating boilers, burners, gas generators, gas stoves, propane fireplaces, water heaters, etc..
【Easy to Install】Two Stage Propane regulator can be connected to the tank without tools.Standard P.O.L. tank connection for propane regulator with overcurrent protection, and it will automatically shut down if the operation error causes danger to ensure safety and durability. Perfect for family BBQ or outdoor travel, easy to disassemble, easy to move, easy to place.

Check Stock

Maxitrol RV48L Natural Gas Pressure Regulator 1/2 FPT Thread 13/16 In and Out Opening 1/2 PSIG In 3 -6 WC Out

GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in....
CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer....
MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column..
OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment.....

Check Stock

Dbgogo CGA-320 Keg CO2 Regulator, Brewing Dual Stage Gauge Beer Kegerator Pressure Regulator with 1/4” & 5/16” Quick Disconnect Barb Connectors and Safety Pressure Relief Valve for Co2 Cylinder Tank

Heavy duty CGA-320 beer keg co2 regulator, no leaks: upgraded brewing beer kegerator pressure regulator features a heavy-duty forged brass body for sturdiness and durability. CGA-320 co2 regulator fits all standard co2 cylinders tanks with CGA-320 outlet. CGA320 cylinder fitting features a hexagonal design for easy tightening with an adjustable wrench. just put a white sealing washer into gas cylinder connector, which can prevent connection between co2 cylinder and keg regulator from leaking..
Stable, easy-to-read, drift-free dual gauge: Dbgogo co2 tank regulator features dual pressure gauges, 0-60 psi output pressure gauge displays amount of co2 pressure provided to beer keg, 0-3000 psi cylinder pressure gauge displays amount of co2 pressure left in cylinder. dual pressure gauge regulator can accurately and stably monitor working pressure in home-brewed beer carbonation system at any time, and reading is simple, which is very suitable for brewing carbonated beverages, beer and tea..
Easy to manually adjust system pressure, locking ring maintains stable pressure setting: co2 regulator has 2 manual adjustment knobs to control entire brewing system pressure. you can set beer keg pressure by slowly turning pressure adjustment knob in “+” direction. tu....

Check Stock

Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon and CO2 Welder Tanks CGA580

ARGON/CO2 REGULATOR FOR WELDING: Terrabloom Argon Gas Flow Meter Regulator is Designed for Professional TIG/MIG Welding Applications. It Provides an....
ARGON FLOWMETER WITH PRESSURE GAUGE: In addition to allowing to adjust gas flow rate, our Argon CO2/Argon flowmeter contains a pressure gauge that....
TIG/MIG FLOWMETER INSTALLATION: TerraBloom Welding Pressure Regulator Seamlessly Connects To Standard Argon/Helium/CO2 Tanks with CGA-580 Inlet....
VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
WARRANTY: Covered by TerraBloom's 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.

Check Stock

SONNLER Argon/CO2 Regulator Flow Meter Compatible With 6.6FT GAS Hose Welding Gas Regulator For CGA-580 Mig Tig Welder Accessories

【Premium Quality Argon Regulator】SONNLER argon flow gauge regulator made of premium durable brass, can withstand harsh environments and has a longer life, won't rust, won't leak, improve your welding skills..
【Wide Application】Ideal for CGA 580 tank fitting, this gas pressure regulator/flowmeter can be used with argon, helium, and CO2 gas tanks (CGA-580 inlet). It's compatible with Miller, Lincoln, Hobart, and most other TIG welders, apply to welding,cutting, chemical, and electronics industries..
【Accurate& easy to read】Adjustable from 0 to 60 cfh (cubic feet per hour), this argon regulator's gas flow is indicated by a ball that moves up and down in the flow tube. The easy-to-read bottle pressure gauge shows how much gas is left in the tank (range 0 to 4000psi). It fits both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting ..
【Two Connection Ways】You can choose the connection method according to your needs..
【7*24 after-sales service】You'll receive 1 x Argon/CO2 flow meter gas regulator, 1 x 6.6 ft hose, and a 30-day warranty. If there is a problem, please feel free to contact, we have professional engineers to provide support..

Check Stock