Top Pipe Repair Couplings Reviews

Canomo Antique Brass Finish Make-A-Lamp Kit 3-Way with 8 Inch Lamp Harp, 2 Pieces 12" Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair

  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY projects and for repair and replacement of broken, tarnished or lamp parts..
  • Antique brass finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Include a 3-Way turn knob socket, 8 inch antique brass detachable harp, 8 foot UL listed clear cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
Check Stock

1 CTS Elster Natural Gas Permasert Line Chamfering Tool Version 2 PN 58504

  • Line size: 1 inch CTS Poly Pipe (1-1/8" Outer Diameter) *Please review sizing diagram..
  • Creates a proper O.D. and I.D chamfer which prevent seal damage when stabbing of the PE piping into New 2.0 Permasert couplings. REQUIRED to properly....
  •  IMPORTANT NOTE: There are various pipe sizes described as either IPS or CTS. These are DIFFERENT pipe sizing standards with different OUTER and....
Check Stock

Smart Vac SMP500 Central Vacuum System Power Unit

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

Central Vac Electric Installation Kit (4), 110 ft. of Pipe

  • Includes All Materials Necessary to Install a Central Vacuum System.
  • Compatible with All Direct Connect Hoses.
  • Kit includes, (12) sweep 90’s, (4) sweep tee's, (4) short 90's, (8) 45’s, (8) pipe straps, (14) stop couplings, (1) glue, (20) cables ties, (22) 5ft sections of pipe (110’), (4) square door inlets, 80’ of wire plus 30’ of wire, and an installation manual..
Check Stock

Universal Low Voltage Installation Kit 3 80 ft of Pipe

  • Includes All Materials Necessary to Install a Central Vacuum System.
  • Universal Kit Can Be Used with Almost All Central Vacuum Makes and Models.
  • Kit includes (9) sweep 90’s, (3) sweep tee’s, (3) short 90’s, (6) 45’s, (6) pipe straps, (11) couplings, (3) mounting brackets, (1) glue, (15) cable ties, (3) round door inlets, 80’ of pipe (5’ sections), 80’ of wire, and an installation manual..
Check Stock

CUFEAL 3-Pack 400mm / 15-3/4\ Long Straight Pipe lamp stem Black Finish Lamp Rod Kit with Couplings (M16)

  • Made of iron,total length of 3 lamp rod connected is about 47 inches,black paint anti rust process.
  • 400mm/15.75“ long ,16mm/0.63" outer diameter lamp rod is hollow to slip lamp wire through..
  • Couplings included, double coupling use to connect 2 lamp rod together perfectly, single coupling use to connect lamp rod to base or lamp fixture..
  • Good ideal for DIY making, repairing, and restoring lamps..
  • Contains: 3x Lamp rod, 2x Double couplings, 2x Single coupling, 2x Pipe thread,2x locknuts.
Check Stock

TAPEBEAR Corrosion Protection Pipe Tape Wrap Pipe Tape for Drain Pipe Metal Electrical Outdoor Underground Pipe Waterproof PVC Black Tape Duct Anti-Corrosion and Protection 2Inch X 33Yard

  • 【Durable Material】This tape is made of pvc film as the base material and coated with rubber pressure-sensitive adhesive. The special rubber adhesive makes the water pipe tape more sticky and not easy to fall off after wrapping the pipe..
  • 【Duct Wrap Tape】Our tape is a high-quality PVC pipe wrap. It is uitable for all kinds of pipeline protection. This tape has superior adhesive material is perfect for any of your professional use..
  • 【Anti-Corrosive】Our tape is coated with special adhesive that is formulated to resist corrosion by salt water, alkalies.
  • Prevent corrosion of steel pipes buried underground and prevent outdoor water pipe corrosion..
  • 【Weather proof】Our tapes are suitable for a variety of work environments, while providing weathering protection and resisting the effects of sunlight exposure..
  • 【Application】It can be used for natural gas pipelines, gas and oil pipelines, pipe joints and conduit couplings, etc, and is widely used for pipeline protection, outdoor pipe, water pipe, underground pipe..
Check Stock

PumpSpy Silent Sewage or Sump Pump Check Valve 2-Inch Check Valve Stainless Clamps Fit 7-1/4 Gap in 2-Inch Schedule 40 PVC Spring-Loaded Flapper Quiet Check Valve Sump Pump Life Increase

  • QUIET OPERATION: Our sump pump check valve has a unique spring-loaded flapper that helps eliminate the water hammer noise that standard check valves produce. The water hammer noise occurs when the discharged water slams the check valve flapper down. This silent check valve can bring a quiet operation to your sump pump..
  • CLEAR VALVE BODY: This check valve will provide visibility to water movement. With the valve's clear body, it's easy to visually confirm that pumped contents are moving, the pipes are not clogged, and the pump in the basin is fully operational..
  • INCLUSIONS: Our silent sump pump check valve comes with stainless steel clamps and Buna-N rubber couplings for quick installation. The clamps and couplings fit a 2" Schedule 40 pipe. Fits within a 7-1/4" gap..
  • KEEP WATER OUT: This check valve is designed to keep pumped contents within the discharge pipe from falling back into the sump basin. A fully functional check valve can increase pump life expectancy by preventing contents from being pumped twice..
  • ABOUT US: PumpSpy provides sump pump systems that help eliminate the unknowns of a sump outage and prevent costly damage. We also offer Smart Sump Pump Systems that automatically track incoming data and check that a sump pump is working properly..
Check Stock

PumpSpy Silent Sump Pump Check Valve - 1-1/2 with Buna-N Couplings Model CV-150 Spring-Loaded Flapper Quiet Check Valve Sump Pump Life Expectancy Increase Includes Steel Clamps Fit 1-1/2″ Pipe

  • ...eck valve will provide visibility to water movement. With the valve's clear body, it's easy to visually confirm that pumped contents are moving, the pipes are not clogged, and the pump in the basin is fully operational..
  • INCLUSIONS: Our silent sump pump check valve comes with stainless steel clamps and Buna-N rubber couplings for quick installation. The clamps and couplings fit a 1-1/2" Schedule 40 pipe. Fits within a 5-1/8" gap..
  • KEEP WATER OUT: This check valve is designed to keep pumped water within the discharge pipe from falling back into the sump basin. A fully functional sump pump check valve can increase pump life expectancy by preventing water from being pumped twice..
  • ABOUT US: PumpSpy provides sump pump systems that help eliminate the unknowns of a sump outage and prevents costly damage. We also offer Smart Sump Pump Systems that automatically track incoming data and check that a sump pump is working properly..
Check Stock

Charlotte Pipe 8 in. PVC DWV Cleanout Plug

  • Price For: Each Standards: NSF 61, NSF 14 Max. Temp.: 140 Degrees F Body Material: PVC Color: White Compliance: ASTM Fittings Sub-Category: Couplings Schedule: 40 Pipe Size: 8" Length: 9.27" Item: Coupling Connection Type: Socket x Socket Country of Origin (subject to change): United States.
Check Stock

Apache 98399065 1/4\ x 24\

  • Pre-coupled. An excellent hose for use with petroleum based hydraulic fluids within a temperature range of -40°F to +212°F. Also handles fluids like gasoline, diesel fuels, mineral oils, glycol, lubricating oils, water, etc. Coupled 1/4" solid male pipe thread on each end, hose and couplings meet or exceed SAE J517 100R2AT specifications..
  • Maximum Operating Temperature: 212 deg. F.
Check Stock

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

  • SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
  • remove using a disconnect clip or disconnect tongs.
  • COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
  • gray collar end works with polybutylene pipe.
  • tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.
Check Stock