Top Pipe Line Sight Glass Reviews

Flow Ezy Filters, Inc. PASS50 1-1/2 30 All Stainless Steel Suction Strainer with Nylon Connector End, 50 GPM, 1-1/2\ Female NPT, 30 Mesh Size

• 2" In-Line, Cam and Groove Sight Glass Strainer Assembly.
• Includes an 8" x 2" Polycarbonate Sight Glass Tube.
• Includes a 2" Stainless Steel Funnel Strainer.
• Includes a 2" Aluminum Type A & D Cam and Groove Fitting.
• Stain and View Your Flow at the Same Time!.

NorthStar Gas Wet Steam and Hot Water Pressure Power Washer - 3000 PSI, 4.0 GPM, Honda Engine

• Uses 1/2in. schedule 80 extra-heavy pipe.
• Forged brass manifold gives improved strength over cheaper aluminum.
• Easy Start stops pressure build-up during start-up.
• Sight glass lets you quickly check pump oil.

TRUGLO Sight-LINE Light WHT

POPOTR Huge Power Toy Self Defensive Ballistic Dart Gun PISTOLA Launcher Hunting Shooting Shooter Tactical Tool Silent Shooting Tactical Gear

• The 48 inch blow pipe brings with 48 darts.
• 12 standard, 12 distractor, 12 destroyer and 12 paralyzer.
• It provided accurate, high speed shots while practicing in the field.
• It comes equipped with a front plastic sight that allows you to line up your shot and carry sling for easy transport..

1/2 Inches Water Pump Strainer, Compatible with 3/8 Inches Hose Barb In-Line Strainer Twist-On Pipe Sprayer Filter for Water Pump 12V DC 80 PSI RV Camper Marine Boat Lawn (1)

• 2" In-Line, Cam and Groove Sight Glass Strainer Assembly.
• Includes an 8" x 2" Polycarbonate Sight Glass Tube.
• Includes a 2" Stainless Steel Funnel Strainer.
• Includes a 2" Aluminum Type A & D Cam and Groove Fitting.
• Stain and View Your Flow at the Same Time!.

Kuryakyn 9931 Bluegrass Breather Catch Tank for Harley-Davidson Motorcycles, Chrome

• Features banjo fittings and chrome tubes that route the vented gasses upward so gravity can keep any expelled oil droplets in the engine.
• Helps in venting expelled oil from the cylinder heads.
• It is recommend to vent the crankcase in open air by running the vent line up and out of sight beneath the tank.
• Includes (1) Chrome Catch Tank Assembly, (1) Chrome - LIL Tank, (1) Chrome - LIL Tank Inlet Rib, (1) Rubber Gasket, (1) Vent Pipe, (1) Oil-Safe Sponge, (1) Hardware Kit.
• Suggested for installation (not Included): allen wrenches.
• Compatible with Harley-Davidson models: Using the Bluegrass Breather Kit.

EXELAIR by Milton FRL Air Lubricator - 1/2\ NPT - Metal Bowl (EX45L-04M)

• FRL Air Lubricators: Extend air tool life and provide a continuous supply of oil..
• Durable cast aluminum body to resist corrosion. Rotating flow dial to adjust oil volume. Easy-access oil fill cap..
• Metal Bowl w/Sight Glass: Indicates oil level. Bowl Capacity: 4.56 OZ..
• 1/2" inch national pipe threads on both inlet/outlet. Thumb Latch releases bowl with 1/8 turn..
• Max Air Flow: 175 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..

1 NPT SUPER DUTY Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

• PLEASE NOTE: 1" NPT MEASURES 1.315" OUTSIDE THREAD DIAMETER IN INCHES. 1" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
• 175 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
• STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 175 PSI. 11oz Metal Bowl With Visible Sight Glass..
• STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 11oz Metal Bowl With Visible Sight Glass..
• STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 11oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 4 Bags Desiccant Beads..

Diyvac SV .Specialty wet vac attachment to evacuate clogged air conditioner condensate drain line.

• Diyvac SV model fits most brands of wet vac hose diameters..
• The black elbow is designed to fit into a 1 inch opening of your pvc condensate drain line.
• Simple to use and saves time ,money and service calls from an a/c tech.Attach your wet vac to the green base and connect the black elbow to the drain line and run for 3 minutes and your done !.
• See the sediment being evacuated through the sight glass in handle..
• PLEASE MAKE SURE YOUR DRAIN LINE HAS 1 INCH OPENING BEFORE ORDERING.

1/2 NPT MID FLOW Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Poly Bowls Great For Paint Spray And Plasma Cutter MANUAL DRAIN

• ...es, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
• STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 150 PSI. 5oz Poly Bowl With Visible Sight Glass..
• STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Poly Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change..
• STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccant Beads..

3 STAGE, HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES, METAL BOWLS, GREAT FOR PAINT SPRAY AND PLASMA CUTTER (1/2\ NPT, MANUAL DRAIN)

• 1/2" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND MANUAL DRAIN STAGE 1.
• 225 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER.
• STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 215 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS..
• STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE..
• STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. COMES WITH 2 BAGS OF DESICCANT BEADS..

EXELAIR by Milton FRL (High Flow) Air Lubricator - 1\ NPT - Metal Bowl (EX55L-08M)

• FRL Air Lubricators: Extend air tool life and provide a continuous supply of oil..
• Durable cast aluminum body to resist corrosion. Rotating flow dial to adjust oil volume. Easy-access oil fill cap..
• Metal Bowl w/Sight Glass: Indicates oil level. Bowl Capacity: 4.56 OZ..
• 1" inch national pipe threads on both inlet/outlet. Thumb Latch releases bowl with 1/8 turn..
• Max Air Flow: 250 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..

3 STAGE HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES METAL BOWLS GREAT FOR PAINT SPRAY AND PLASMA CUTTER 1/2 NPT AUTO DRAIN

• 1/2" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1.
• 175 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER.
• STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 175 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS..
• STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE..
• STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. UNIT COMES WITH 2 BAGS DESICCANT BEADS..