Top Piezoelectric Ignitor Reviews

Round Gas Range Oven Ignitor for GE 41-208 ER4342528 SGR401 SGR400

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

Gas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

HiLetgo 5pcs Piezoelectric Sensor Analog Ceramic Vibration Sensor Module Piezoelectricity for Arduino DIY KIT

  • 1. Based on piezoelectric ceramic chip analog vibration makes use of the anti-transformation process of piezoelectric ceramic making the electric signals vibrate..
  • 2. When the piezoelectric ceramic shocking will generate an electrical signal, Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums..
Check Stock

HID Headlight Xenon Ballast Ignitor - Replaces 33129-S0K-A01 33129-SCC-003 33129-SEA-003 W3T10571 - Compatible with Acura Honda & Mazda Vehicles - MDX TL TSX RDX Odyssey S2000 3 CX-9

  • Replacement HID OR Xenon Ballast Ignitor - is responsible for supplying power to your headlight's bulb. Overtime your HID Ballast Inverter can fail....
  • Compatible Replacement for Acura, Honda & Mazda Vehicles - 2013 - 2015 ILX | 2012 - 2013 MDX | 2007 - 2015 RDX | 2004 - 2005, 2012 - 2014 TL | 2004 -....
  • Replaces Part# 33129-S0K-A01, 33129-SCC-003, 33129-SEA-003, W3T10571 - Each of your vehicle’s headlights has its own ballast ignitor. These ballasts....
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part. This AA Ignition HID Xenon Ballast Ignitor is a direct replacement for the ballast....
  • Lifetime Warranty - This HID Xenon Ballast Ignitor comes complete with a lifetime warranty. If the ballast ignitor ever fails simply contact us for a....
Check Stock

PP200 PP200SC HA1000 Reddy Desa Ignitor Kerosene Heater by Ministry of Warehouse

  • ASKFD PP200SC Ignitor Heavy Duty Replacement for PP200 Ignitor HA1000 Ignitor 102548.
Check Stock

VI4 2 PAK Gas Oven Range Ignitor for PB040001 Viking

  • Gas Range Oven Replacement Viking Ignitor AR04001..
  • The White Ceramic part of the ignitor measures 2-1/4" Long..
  • if you have any questions about the product and its models. contact us and we will help you.
Check Stock

(NEW Part) Gas Range Oven Ignitor for Viking Range replacement for PB040001 AR04001

  • Set of Gas Range Oven Ignitor part number AR04001..
  • with the purchase of quantity 1 of this listing you will receive quantity 1 ignitors..
  • These are a replacement Viking Ignitor, part number PB040001..
  • This is a Flat Ceramic Bar with a Round Style Ignitor..
Check Stock

3-24V Electronic Buzzer, Piezo Tone Buzzer 85 to 95 Decibels Cable Length 100mm Widely Used on Computers, Printers, Photocopiers, Alarm, Electronic Toys

  • ✔【RATIONAL DESIGN】- Buzzer is an electronic sounder with integration structure. Using DC power, connected to rated power and the buzzer will sound continuously..
  • ✔【CORE COMPOSITION】- Piezoelectric buzzer is mainly made up by multivibrator, piezoelectric buzzer chip, impedance matching unit, resonator and shell..
  • ✔【PRODUCT PRINCIPLE】- Multivibrator is composed of transistors or integrated circuits. When switched on, multivibrator vibrates and outputs audio signal..
  • ✔【EASY TO CONTROLL 】- Impedance matcher drives piezoelectric buzzer sound. Can be controlled conveniently..
  • ✔【 APPLY TO】- The active buzzer is widely used on computers, printers, photocopiers, alarm, electronic toys, automotive electronic equipment, telephone, timer and other electronic products..
Check Stock

Vibration Switch Sensor Module, Piezoelectric Vibration Tapping Sensor Module Vibration Switch Module 5.0V DC AD/DO

  • An analog vibration sensor based on a piezoelectric ceramic sheet is an inverse transformation process that uses piezoelectric ceramics to generate vibration. When the piezoelectric ceramic piece vibrates, an electrical signal is generated..
  • Special sensor expansion boards are used in combination, and analog ports can be weakly perceived. Vibrating electrical signals enable interactive work related to vibration, such as electronic drum interactions..
  • ADO output: The analog voltage ceramic vibration sensor is connected to the controller analog terminal A0 according to the program. When the vibration degree is different, observing the output value of the serial port can realize the vibration-related in.
  • According to the greater the vibration intension, the higher the output voltage, the sensitivity of the vibration amplitude can be adjusted by the potentiometer..
  • This product has high sensitivity and can be adjusted to respond with a mouth blow or an output with a hand tap (Low turn sensitivity is low, right turn sensitivity is high)..
Check Stock

DC 3-24V 10mA Active Piezo, Transducers Piezo Transducers Buzzer Electronic Buzzer Continuous Sound with Lead Wire, 23x12mm, 85 to 95 Decibels

  • Buzzer Sounder Alarm-Convenient Control-Buzzer is an electronic sounder with integration structure. It be controlled conveniently..
  • Buzzer Alert Buzzer-Constitution-Piezoelectric buzzer is mainly made up by multivibrator, piezoelectric buzzer chip, impedance matching unit, resonator and shell..
  • Sound Buzzer 24vdc-Working Principle-Multivibrator is composed of transistors or integrated circuits. When switched on, multivibrator vibrates and outputs audio signal..
  • buzzer" Piezo Transducers Electronic Buzzer Alarm Electromagnetic Active Buzzer Continous Beep Continuously Alarm Tone Mini Active Piezo Buzzers Piezo Transducers-Working Principle-Impedance matcher drives piezoelectric buzzer sound. Connected to rated power and the buzzer will sound continuously..
  • Electronic Buzzer Alarm-Widely Application-This Buzzer is used DC power, it is widely used on computers, printers, photocopiers, alarm, electronic toys, automotive electronic equipment, telephone, timer and other electronic products..
Check Stock

Ozeri Piezoelectric Stove Lighter Flameless Red

  • Utilizes crystal powered piezoelectricity -- where no batteries, matches, lighter fuel, or flint are ever needed..
  • Fitted with durable piezoelectric crystals that produce a tiny electric spark from the mechanical force applied to the handle..
  • Simply position the tip next to the stove gas source and squeeze the handle for the piezoelectric spark to generate..
  • Requires no refills and ships without anything hazardous, and cleans easily due to the absence of any batteries or fluids..
Check Stock

Hiland THP-BS 10 3/4\ 3HOLE Main Burner Emitter Screen, 10-3/4, Grey

  • Connects to electric piezoelectric striker switch.
  • Sends a spark to the tip of the igniter wire from piezoelectric switch.
  • Patio heaters allow you to extend the life of your outdoor space to 9 or even 12 months, depending on location.
Check Stock

Duralight Furnace Hot Surface Ignitor Direct Replacement For Goodman Amana Janitrol OEM Part B1401018

  • ❤【PERFECT FIT】- 62-22868-93 hot surface ignitor is perfectly compatible with Rheem, Ruud, and Weatherking furnaces (NOTE: Not To Fit -gec or -ged "drum" Heat Exchanger Type Furnaces).
  • ❤【REPLACEMENT MODEL】- 62-22868-93 furnace ignitor replaces part number 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, 8553-5514 (Contact us if you are not clear the compatibility, and we are here to help within 24 hours).
  • ❤【EXCELLENT PERFORMANCE】- The 62-22868-93 furnace hot surface ignitor with wire connectors is used to light the oven burner and adjust the temperature normally. It fixes the symptom that the oven failing to heat or not heat properly. Use this high-quality replacement part to extend the life of the oven.
  • ❤【PREMIUM QUALITY & EASY INSTALLATION】- Our 62-22868-93 furnace ignitor for rheem is made of durable and high-quality materials well-tested by the manufacturer, with higher heat resistence, durability and the best quality for greater power connection, higher load and longer service life. ⚠️It is fairly easy to install. If wire connector does not match up you will need to cut off the connector and splice the wires with porcelain wire nuts.
Check Stock