Top Picatinny Rings On Weaver Base Reviews

PRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings | 30 mm Diameter | 1.00 inch Height

  • 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Vortex Optics Hunter 1-inch Riflescope Rings - Medium Height (0.87 in)

  • These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches (22.0 mm) from the base..
  • Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups..
  • Made from aircraft-grade 6061-T6 aluminum for optimum strength..
Check Stock

Evolution Gun Works Marlin 1895 336,444 Picatinny 0 MOA Rail Scope Mount Black

  • Picatinny-style base and compatible with Picatinny or Weaver scope rings..
Check Stock

LONSEL Picatinny Riser Mount, 2 Pack Low Profile Rail Riser Mounts Adaptor with QD Lever Lock Quick Release/Detach & 5 Slots Picatinny Rails for Scope Rings Optics Sights - 1/2" H x 2.5'' L

  • ✌【Low Profile Picatinny Riser Mount】- LONSEL 2 Pack Low Profile Picatinny Riser Mounts with 1/2'' of Rise Style, It's Designed to Lift Your Optics Providing A Clear View Over The Front Sight. Perfect for Mounting Various Red Green Dot, Sights, Scope Rings, Optics, Or More Other Accessories..
  • ✌【With 5 Slots Picatinny Rails】- Top 5 Slots Picatinny Rail Design, Allowing You Add On Any Standard Picatinny or Weaver Accessories, Such As Red Dots, Micro Red Dot, Microdot, Backup Sights, Scopes, Optics, Flashlight and Other Accessorie..
  • ✌【Premium Aircraft Aluminum, Solid & Durable】- Precision Machining of Aircraft Grade 6061 Aluminum Alloy + Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Build No Wobble or Rattle. Item Size: 2.56"L x 1.96''W x 0.78''H.
  • ✌【QD Lever Lock Quick Release】- Quick Detach Design, Side Lever Locking with Spring Tension Control, and Adjustment Nuts By Comes With Allen Wrenchs To Achieve Custom Fit and Tension, Easy and Quick To Remove or Install..
  • ✌【100% Moneyback Guarantee】- We Provide 100% Satisfaction Money-Back Guarantee. Choose Us, You Will Get 2 Set Picatinny Riser Mounts At The Great Value Price. Kindly Note: The Riser Mounting Base On....
Check Stock

Monstrum Precision Picatinny Scope Rings | 1 inch Diameter | 0.80 inch Height

  • 0.80 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek....
  • 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.00 inch Height

  • 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.20 inch Height

  • 1.20 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Athlon Optics Precision 34mm MSR Ring, Black (701007)

  • Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Monstrum Precision Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height - Low

  • 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Higoo 2PCS 11mm Dovetail to 20mm Picatinny/Weaver Low Pro Snap-in Rail Adaptor

  • Top slot with spring tension retraction/expansion design to snap into Picatinny/Weaver base.
  • Extremely low profile and lightweight,Removable Stop Pin for Extra Secure Installation.
  • Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base.
  • Type: Picatinny/Weaver Contains Right Angle Wrench*1.
Check Stock

Weaver Thumbnut Spr 1\ Mount

  • [Picatinny Riser Mount] This riser mount base fits on standard Picatinny/Weaver rail..
  • [Unique Adapter] The unique design makes the riser mount look symmetrical and beautiful,and can be firmly fixed on the track without shaking or falling off..
  • [5 Picatinny Slots] With 5 Picatinny slots, 2 inches long / 0.75 inches high, suitable for equipment with Picatinny or Weaver adapter. Such as: reflex sight, red dot sight..
  • [Material] Made of high-quality aircraft aluminum, resistant to high and low temperature, anti-corrosion, anti-rust, light weight, strong and durable..
  • [Size & Weight] Height: 0.75 inches, upper width: 0.82 inches, lower width: 1.2 inches, length 2 inches, weight: 1.5 oz, lightweight and mini..
Check Stock

Monstrum Precision V2 Picatinny Scope Rings with Integrated Level Bubble | 30 mm Diameter | Low Profile

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock