Top Photoelectric Switch switch Reviews

Taiss Photoelectric Beam Sensor E3JK-R4M1 Indoor Wall Mounted 12-240VDC 24-240VAC Retroreflective photoelectric Sensor Switch Proximity Switch 2M Cable Induction 3M

  • Special attention：If you are not clear about the product connection method, please refer to the wiring diagram of this product.If you receive a switch that is incompatible with your application or does not work properly, please contact us by email in time, and we will solve your problems for you..
  • Output Current: 2A； Detection distance: 3m； Response Time: 003c 30ms； Induction Frequency: 200HZ..
  • Weight: 185g.Special note: If this photoelectric switch is used to control the alarm system, please install it together with the relay. Otherwise, the switch will not work..
  • Modle: E3JK-R4M1； Relection Type: Specular Reflection； Supply Voltage: 12-240VDC 24-240VAC；Load Rating: 3A 250VAC.Indicator Light Color: Red； Current consumption: 15mA； Working temperature: -25-55 degrees..
  • Package Content: 1 x Photoelectric Switch, 1 x Reflector Panel, 1 x Mounting Bracket(with screws,nut).If you have a problem with the knob you received, please contact us by email in time..
Check Stock

Lee Electric 209DN 600-Watt Door Light Switch,White

  • ...ease disconnect the power, then place the screw thread of the photocell sensor switch in the knockout hole and fasten it with a rubber gasket and zinc alloy lock-nut. Adjust the swivel base and point the outdoor photo cell sensor at the precise spot where you need it..
  • 【ADJUSTABLE DESIGN & WATERPROOF】 - The photoelectric tube can be rotated 180° to achieve a beautiful light direction, and focused on the position you need. Heavy-duty body and IP65 Water-resistant protects the photocell sensor against weather elements such as rain and dust..
  • 【RELIABLE QUALITY & SERVICE】 - Two year warranty available. ADUB 120-277V photoelectric switch sensor is UL certificate. Please feel free to contact us for a refund or replacement if you have any questions or quality problems. We will respond within 24 working hours..
Check Stock

UGarden String Light Hanging Kit with 170ft Coated Stainless Steel 304 Tension Wire Rope, Outdoor Light Guide Wire kit, String Lights Suspension Kit

  • ... internal ambient light level auto detection circuit that will automatically turn on at dusk and off at dawn depending on the ambient lighting level, saving you the trouble of having to remember to turn the lights on or off at a specific time.
  • Waterproof Automatic Light Switch: the waterproof cover can make our photoelectric switches not easy to corrode and protect it from dirt and dust, and help the switch work better in rain, wind, snow and other harsh environments.
  • Specifications: model NK-GT, 120VAC, 50/ 60HZ, applicable voltage range is 105-130V.
  • Model LP-403C, 120-277VAC, 50/ 60HZ, please check the specifications carefully before purchasing.
  • Wide Applications: these 120V photoelectric switches can be applied to control outdoor area lights, bollard lights, porch lights, patio lights, entrance lights, driveway and sidewalk lighting, street lighting, outdoor lighting, indoor lighting, sidewalk and landscape lighting.
  • Installation Method: model NK-GT electrical light switches can be easily installed on the precision focus lamp, just disconnect the power, put the screw wire of the switch into the hole on the outside of the lamp, then tighten the rubber washer and zinc alloy ring nut.
Check Stock

HiLetgo 3pcs E18-D80NK Infrared Photoelectric Switch Obstacle Avoidance Sensor Module

  • This is a collection of emission and reception in one photoelectric sensor..
  • Detection distance can be adjusted according to requirements..
  • The sensor has a detection range, interference by visible light small, easy to assemble, easy to use and so on..
  • Can be widely used in robot obstacle avoidance, assembly line and many other automated products..
  • Photoelectric sensor (photoelectric switch) NPN normally open..
Check Stock

Taiss/30cm Adjustable M18 Diffuse Reflection photoelectric Switch Sensor Optical Three Lines PNP NO（Normally Open）Proximity Switch 6-36VDC E3F-DS30P1

  • Wire Type : DC 3 Wire, Proximity-sensing / Diffuse Type.
  • Body Size : 2.3 x 7cm/0.9" x 2.7'' (Max.D*L).
  • Package Content : 1 x Photoelectric Switch.
Check Stock

Taiss/ M18 Infrared Ray Diffuse Reflection Photoelectric Switch Sensor Optical Three Lines 6-36VDC PNP NO Proximity Switch Inductive Distance 10 cm E3F-DS10P1

  • Wire Type : DC 3 Wire, Proximity-sensing / Diffuse Type.
  • Body Size : 2.3 x 7cm/0.9" x 2.7'' (Max.D*L).
  • Package Content : 1 x Photoelectric Switch.
Check Stock

10mm Distance Measuring Capacitive Proximity Sensor Switch Detector LJC30A3-H-J/EZ/DZ NO/NC Work Voltage 0-250vAC(#1)

  • Product Name : Photoelectric Switch w Reflector.
  • body Size: 2. 4 x 7. 5cm/0. 9" x 3" (max. D*l).
  • reflector panel Size: 6. 5 x 4 x 0. 8cm/2. 6' ' x 1. 6' ' x 0. 3' ' (l*w*t).
  • Reflector Size : 6. 5 x 4 x 0. 8cm / 2. 6" x 1. 6" x 0. 3"(L*W*T).
  • package content: 1 x Photoelectric switch.
  • 1 x reflector panel: 1 x reflector panel.
Check Stock

Omron E39-R1 Reflector for Use W/ E3F2 Photoelectric Sensors

  • M12 PNP NO ATO Through-beam photoelectric sensor consists of a light projector and a light receiver.
  • Infrared photoelectric sensor can distinguish the opaque reflective object, with a detection range, easy to assemble and use, and less susceptible to interference, long life and so on.
  • Material: Housing:Nickel plated brass, Detection surface (lens): PMMA.
  • Package Content: 1 Pair x Photoelectric Switch.
  • 【Customer First】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

Fosmon Wireless Remote Control Electrical Outlet Switch (2 Pack) - ETL Listed, (15A, 125V 1875W) Remote Light Switch Outlet Plug with Braille (On/Off) Mark for Lamp, Lights, Fans, Expandable

  • Photoelectric design: photo eye light sensor is reliable and quality, weatherproof and anti-rust, stable and safe, you can use with confidence.
  • Built-in external photosensitive switch, also applied as a small and rainproof street light controller photoelectric switch.
  • Intelligent detection design: this light sensor photocell turns on your exterior lights at dusk and dawn, automatically control lighting according to ambient lighting levels.
  • The internal design has an automatic ambient light level detection circuit that automatically switches off during the day and on at night.
  • Waterproof to withstand bad weather: equipped with a waterproof cap, photo eye sensor for outdoor lights is designed to double protect the sensor lens, assists the conversion to work better in harsh environments, like rainy, windy, snow day and so on.
  • Multiple compatibility: light switch daylight sensor's voltage is 120V AC, can be compatible with most lamps, such as incandescent, fluorescent, CFL, HPS, LED.
  • Remember that LEDs operate on DC power, other voltages are not suitable.
  • Broad utilization: dust to dawn sensor features time-delay detection circuit, accurate detection of natural light, no accidental light, such as oncoming traffic lights, can be applied to street lights, dome....
Check Stock

Taiss/ 1 Pair M18 Infrared Ray Through-Beam Reflection Optical Photoelectric Switch Sensor Three Lines NPN NO 6-36VDC Proximity Switch Inductive Distance 5M with mounting Bracket E3F-5DN1-2Z

  • Wire Type : DC 3 Wire, Proximity-sensing / Opposite Type.
  • Body Size : 2.3 x 7cm/0.9" x 2.7'' (Max.D*L).
  • Package Content : 1 Pair x Photoelectric Switch + 2 x mounting bracket.
Check Stock

HiLetgo 20pcs ITR9608 ITR9608F ITR-9608 DIP-4 Opto Photo Interrupter Optical Sensor Photoelectric Switch Optical Interrupter Photoelectric Sensor DIP4

  • HiLetgo 20PCS ITR9608-F Photoelectric Switch.
  • Optical Interrupter Photoelectric Sensor.
Check Stock

USB Foot Switch Single Pedal Foot Switch Game Control Action HID Suitable for Keyboard Mouse PC Laptop Play Games Photo Booth Instrument Control Media Play Zoom

  • Multi Functions:USB Single pedal switch with mouse, keyboard, gaming, string and multimedia functions, is a standard host interface device and....
  • High Sensitivity: The single foot switch pedal is made with a durable, sensitive photoelectric switch that gives you an easy touch response with....
  • Ergonomic Pedal: USB foot switch pedal is ergonomically designed, the wide pedal makes your feet comfortable for a long time, and it is not easy to....
  • Easy to Use: Transcription foot pedal is freely triggered by your foot, easy to operate, and the interface type is USB A, suitable for any computer..
  • Wide Application: Foot switch is designed for playing games, Photobooth,Zooming, Transcription key settings, Factory testing, Instrument control,....
Check Stock

FYSETC 3pcs Ender 3 Limit Switch Mechanical Endstop Module 3D Printer Part for CNC RepRap Makebot Prus RAMPS 1.4 Board Ender 3/Pro Ender 5 CR-10 S4 S5 Series

  • 3D Printer Accessories Limit Switch 3Pin N/O N/C control, replacement for Ender-3/CR-10/CR-10S/CR-S4/CR-S5/CR-10S Pro, Ender-3/Ender-3 Pro 3D printer..
  • Optical Endstops switch with 1M Photoelectric Light Control.
  • DIY Must-have 3D Printer switch: With trigger indicator, 3 Pin N/O N/C control, easy to use Micro Switch.
  • Maximum voltage: 125V, Maximum current: 1A. Size: 1.0x0.8 x 0.3in/2.6 x2 x 0.7cm. Small and compact size, easy installation, just plug and play.
  • What you get? 3Pcs endstops no include cables. Generally, the printer DIY system need at least three optical switches.
Check Stock