Top Phenolic Paper Laminate Reviews

Cool Blocks Bandsaw Blade Guide Block Size 1/2" x 1/2"

  • Made from a specially formulated graphite impregnated phenolic laminate.
  • Cool Blocks are self-lubricating, enabling them to withstand the heat.
  • Eliminate blade damage that occurs when teeth contact the metal blocks.
  • 4 blocks per pack to fit upper and lower guides.
Check Stock

Leecraft RG-2 Zero Clearance Insert for RIDGID TS2400-1 2400LS and 2410LS Colors May Vary

  • Table saw insert for Ridgid jobsite saws models TS2400-1, TS2400LS, and TS2410LS..
Check Stock

Olson Saw CB50010BL 12-Inch Sears TTB Band Saw Accessory Cool Blocks

  • For Sears 12″ Tilting Table Band Saws, Skill 10″ HD3640 and Dermal 10″ 1120.
  • Contains: 4 guide blocks 3/8″ x 3/8″ x 3/4″.
  • Cool Blocks blade guides are made from a high tech, non-metallic composite material, “Graphite Impregnated Phenolic Laminate”.
Check Stock

Leecraft RG-4 Table Saw Zero-Clearance Dado Insert for RIDGID R4510 Colors May Vary

  • Fits Ridgid R4510 jobsite saw for use with dado sets.
  • 14" x 3-3/4" x 3/8" thick without riving knife slot.
  • Precision machined from melamine faced high density phenolic laminate.
Check Stock

Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746

  • Table saw insert for eWalt DW744 and DW746.
  • Significantly reduces saw noise, dust, chip-out, and splintering.
  • Constructed of high-density phenolic laminate with a bonded-melamine surface.
  • User-friendly with leveling and lateral adjustment screws, rear anti-life pin, and precut blade bottom pocket.
Check Stock

Leecraft RG-1 Zero Clearance Table Saw Insert for Ridgid TS3650 Table Saw

  • Table saw insert supports work right up to the blade for smooth, more precise cuts.
  • Offers superior rigidity, flatness, durability, and low friction.
  • Made from high-density phenolic laminate with a bonded-melamine surface.
  • Includes leveling screws, side and end adjustment screws.
  • precut blade bottom pocket for fully retracted blades and bevel cuts.
  • designed for Rigid table saw with carbide-tipped blades only.
Check Stock

CMT 222.080.10 Industrial Plexiglass and Plastic Saw Blade, 10-Inch x 80 Teeth MATB Grind with 5/8-Inch Bore

  • Heavy-duty cutting, smooth finish with no melting. For radial arm saws, miter/table, special saws..
  • Cut thin plastic, phenolic, plexiglass, vinyl, laminate flooring and plywood..
  • 0.110 kerf thickness, 0.087 plate thickness, -3° hook angle, Alternate top bevel with chamfer grind..
  • Chrome carbide cutting edges guarantee long cutting performance..
  • Anti-vibration design, expansion slots to reduce noise, tight tolerance, longer lifetime..
Check Stock

Morovan Monomer Acrylic Nail Liquid for Acrylic Powder, 2pcs 4oz+2.5oz Acrylic Liquid with Glass, Glass as a cup for Professional Monomer Acrylic Liquid

  • LEAK-PROOF PHENOLIC CAPS This modern leak-proof cap eliminates the need of the classic paper/plastic seals that can detach from the bottle neck due to the monomer chemical composition. Phenolic Caps made of industrial-grade highly rigid plastic, molds itself around the sealing areas as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, and forming an exceptionally tight seal..
Check Stock

VHALE Glossy Clear Self-Adhesive Overlay Laminating Sheet Contact Papers, 7 X 8 Inches, Single-Sided, for Easy Application of Paper Suncatcher Kids’ Crafts, 3.15 Mil, Pack of 20

  • [SELF-LAMINATE SHEET / CONTACT PAPER – 20 PACK] Packaged with 20 pack per set, glossy clear self-adhesive back overlay PVC laminate sheet / contact paper, NO HEAT or LAMINATOR NEEDED..
  • [COLOR AND SIZE] Color: Glossy Clear Transparent. Size: 7 Inches X 8 Inches. Thickness: 0.08MM / 3.15MIL..
  • [FEATURES] Single-sided self-laminate sheet contact paper provides easy and instant adherence for suncatcher templates with colored tissue paper pieces and provides permanent protection to your finished suncatcher craft. Two laminate sheets are required to cover the front and back..
  • [BENEFITS] The adhesive-backed self-laminating sheets come with a peelable liner that works just like a sticker. This is the most convenient and fast way to preserve the paper suncatcher artwork..
  • [USAGE] Easy application, just peel the backing of the first laminating sheet, position your document and seal with a second laminating sheet, placing sticky-sides together. Ideal for photos, teacher supplies for classrooms, book covers and artwork..
Check Stock

Bosch PR004 Offset Base With Roller Guide for the Bosch Colt PR20EVSK & PR20EVSNK Palm Routers

  • Offset base designed to work with Bosch palm routers PR20EVSK and PR20EVSNK.
  • Permits routing of near-vertical surfaces such as laminate applied to the top of a countertop backsplash.
  • Quick-Clamp System allows motor to be easily moved from base to base.
  • Includes base, base cover, phenolic sub-base, 1/4-inch self-releasing collet, drive gear, roller guide for PR004, wrench..
Check Stock

Morovan Monomer Acrylic Nail Liquid for Acrylic Powder - 17OZ Professional Liquid Monomer Nail System Kit Monomer Liquid For Acrylic Nail Extension Carving MMA-Free Non-Yellowing Formula

  • LEAK-PROOF PHENOLIC CAPS This modern leak-proof cap eliminates the need of the classic paper/plastic seals that can detach from the bottle neck due to the monomer chemical composition. Phenolic Caps made of industrial-grade highly rigid plastic, molds itself around the sealing areas as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, and forming an exceptionally tight seal..
Check Stock

Leecraft DW-4 Zero-Clearance Insert for Dewalt Sliding Compound Miter Saws DHS780 DHS790 DWS779 DWS780 and DWS782 Colors may vary

  • Leecraft model DW-4 fits DeWalt sliding miter saws: DHS790, DWS779, DWS780 and DWS782.
  • Miter saw insert supports work right up to the blade for smooth, more precise cuts.
  • Offers superior rigidity, flatness, durability, and low friction.
  • Made from high-density phenolic laminate with a bonded-melamine surface.
Check Stock

Bosch Model 4000 & 4100 Series Table Saw Zero-Clearance Blade Insert 4130 Approx Dims 13-5/8 in x 3-3/4 in x 3/8 in

  • Insert Dimensions: Fits 4100/4000 series jobsite table saws 13-9/16" x 3-3/4" x 7/16".
  • Made from high-density phenolic laminate with a bonded-melamine surface.
  • Bosch insert insert fits various Bosch models of table saws..
  • Includes leveling screws, side and end adjustment screws.
  • Please check your Length x Width x Thickness of your current insert before ordering to ensure that you get the correct insert..
Check Stock