Top Phenolic Cotton Cloth Laminate Reviews

Cool Blocks Bandsaw Blade Guide Block Size 3/8" x 3/8"

  • Made from a specially formulated graphite impregnated phenolic laminate.
  • Cool Blocks are self-lubricating, enabling them to withstand the heat.
  • Eliminate blade damage that occurs when teeth contact the metal blocks.
  • 4 blocks per pack to fit upper and lower guides.
Check Stock

Cool Blocks Bandsaw Blade Guide Block Size 1/2" x 1/2"

  • Made from a specially formulated graphite impregnated phenolic laminate.
  • Cool Blocks are self-lubricating, enabling them to withstand the heat.
  • Eliminate blade damage that occurs when teeth contact the metal blocks.
  • 4 blocks per pack to fit upper and lower guides.
Check Stock

Leecraft RG-2 Zero Clearance Insert for RIDGID TS2400-1 2400LS and 2410LS Colors May Vary

  • Table saw insert for Ridgid jobsite saws models TS2400-1, TS2400LS, and TS2410LS..
Check Stock

Olson Saw CB50010BL 12-Inch Sears TTB Band Saw Accessory Cool Blocks

  • For Sears 12″ Tilting Table Band Saws, Skill 10″ HD3640 and Dermal 10″ 1120.
  • Contains: 4 guide blocks 3/8″ x 3/8″ x 3/4″.
  • Cool Blocks blade guides are made from a high tech, non-metallic composite material, “Graphite Impregnated Phenolic Laminate”.
Check Stock

Leecraft RG-4 Table Saw Zero-Clearance Dado Insert for RIDGID R4510 Colors May Vary

  • Fits Ridgid R4510 jobsite saw for use with dado sets.
  • 14" x 3-3/4" x 3/8" thick without riving knife slot.
  • Precision machined from melamine faced high density phenolic laminate.
Check Stock

Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746

  • Table saw insert for eWalt DW744 and DW746.
  • Significantly reduces saw noise, dust, chip-out, and splintering.
  • Constructed of high-density phenolic laminate with a bonded-melamine surface.
  • User-friendly with leveling and lateral adjustment screws, rear anti-life pin, and precut blade bottom pocket.
Check Stock

Leecraft RG-1 Zero Clearance Table Saw Insert for Ridgid TS3650 Table Saw

  • Table saw insert supports work right up to the blade for smooth, more precise cuts.
  • Offers superior rigidity, flatness, durability, and low friction.
  • Made from high-density phenolic laminate with a bonded-melamine surface.
  • Includes leveling screws, side and end adjustment screws.
  • precut blade bottom pocket for fully retracted blades and bevel cuts.
  • designed for Rigid table saw with carbide-tipped blades only.
Check Stock

VanDuck 100% Cotton Terry Cloth Mop Pads 15x8 Inch 6-Pack (Mop Is Not Included)

  • Cotton Terry Cloth Mop Covers (MOP IS NOT INCLUDED).
  • Size 15x8 inches. Cotton Mop Head Replacement. Set of 6.
  • For all floor types including hardwood and laminate: tiles, all kinds hardwood wipes..
  • Mop Head Replacement for Wet/Dry Flat Mops..
Check Stock

CMT 222.080.10 Industrial Plexiglass and Plastic Saw Blade, 10-Inch x 80 Teeth MATB Grind with 5/8-Inch Bore

  • Heavy-duty cutting, smooth finish with no melting. For radial arm saws, miter/table, special saws..
  • Cut thin plastic, phenolic, plexiglass, vinyl, laminate flooring and plywood..
  • 0.110 kerf thickness, 0.087 plate thickness, -3° hook angle, Alternate top bevel with chamfer grind..
  • Chrome carbide cutting edges guarantee long cutting performance..
  • Anti-vibration design, expansion slots to reduce noise, tight tolerance, longer lifetime..
Check Stock

VanDuck 100% Cotton Pad Terry Cloth Mop Refills 15x8 inches, 2 Pack (Mop is Not Included)

  • Cotton Mop Pad Compatible with Quickie, ShMop, O-Cedar, Bona, Bruce, Casabella 15"x 8" flat mops.
  • Terry cloth mop pads ideal for hardwood, tile, vinyl, marble and laminate floors.
  • Terry cloth mop covers can be used wet or dry and machine washable for reuse.
  • Pick up dirt, dust and pet hair easily. Thick and strong material.
  • Soft, absorbent, made with elastic-fitted for easy replacement. Pack of 3.
Check Stock

Bosch PR004 Offset Base With Roller Guide for the Bosch Colt PR20EVSK & PR20EVSNK Palm Routers

  • Offset base designed to work with Bosch palm routers PR20EVSK and PR20EVSNK.
  • Permits routing of near-vertical surfaces such as laminate applied to the top of a countertop backsplash.
  • Quick-Clamp System allows motor to be easily moved from base to base.
  • Includes base, base cover, phenolic sub-base, 1/4-inch self-releasing collet, drive gear, roller guide for PR004, wrench..
Check Stock

Aramith Tournament Value Pack Tournament Billiard Pool Ball Set 2 1/4' with Six Red Dots Pro-Cup Cue Ball, Micro-Fibre Cloth, Ball Cleaner, Jim Rempe 2 1/4' Training Ball

  • ...imizing significantly table cloth wear. With a life-time that exceeds up to 8 times that of the average polyester and phenol-like resins, reaching easily up to 40 years in residential use, Aramith ball sets are the logical choice for both the trade and the player.
  • Aramith Billiard Ball Cleaner: Specifically made for phenolic balls. Regular use of Aramith Ball Cleaner will keep your Aramith phenolic billiard balls polished and lustrous for years to come! Volume: 8.4 fl.oz. (250 ml).
  • Aramith Micro-Fibre Cloth: Ultra high absorption: absorbs 4x its weight in water, 8x its weight in grease. High cloth resistance: strong fibre with "w" anchorage within the textile structure.
  • this velvet structure means no fibers will be lost on the ball surface. Fiber thickness: 0.6 g/10.000 m insures excellent cleaning performance.
  • even inside small surface defects or scratches. Great dimensional stability: no shrinkage after hot wash (60 C/140 F).
  • Aramith Jim Rempe Training Ball: 2-sided 2"1/4 training cue ball + 56-page instructions booklet in English, French and Spanish. For beginners and advanced players. Concept and design by Jim Rempe. Has a beginner AND advanced player side to assist you in your progress. The two unique ball patterns will help you: See where to ....
Check Stock

Leecraft DW-4 Zero-Clearance Insert for Dewalt Sliding Compound Miter Saws DHS780 DHS790 DWS779 DWS780 and DWS782 Colors may vary

  • Leecraft model DW-4 fits DeWalt sliding miter saws: DHS790, DWS779, DWS780 and DWS782.
  • Miter saw insert supports work right up to the blade for smooth, more precise cuts.
  • Offers superior rigidity, flatness, durability, and low friction.
  • Made from high-density phenolic laminate with a bonded-melamine surface.
Check Stock