Top Phanteks Pwm Fan Hub Reviews

LRONG 1PC PC Chassis Fan Hub CPU Cooling HUB Fan PWM Hub SATA Controller Speed Controller

  • 12V 10-way 4pin SATA fan hub, to solve the problem of insufficient motherboard fan ports. The hub has 10 fan ports, can support 10 fans, can meet various host requirements, and supports 3pin/4pin fans..
  • Installation steps: The PWM port is connected to the CPU fan port on the motherboard. The red port is dedicated to the CPU fan. Connect 1 fan to the red portand then connect the rest of the fans. Then you need to connect the fan hub’s PWM cable to the motherboard. Connect the SATA cable to the fan hub..
  • Equipped with PWM cable: The hub is equipped with a PWM cable with a length of 40CM, which can support the back line. After the PWM cable is connected to the main board, the temperature control and speed can be controlled by the main board..
  • Convenient installation: the hub is fixed with 3M glue, and the back of each hub is equipped with an American 3M glue, which can make the hub work well.
  • Package content: 1 X 12V 10-channel 4pin fan hub, 1X PWM connection cable..
Check Stock

Phanteks PH-ES614LTG_AG Chassis/Tempered Glass Panel, Full Tower ATX Case, Anthracite Grey

  • Sandblasted aluminum faceplates. Ambient lighting with LED control (10 colors). Clean interior – Hidden PSU& HDDs.
  • Tempered Glass Panel on hinges. Easy accessibility to fans and dust filters. Equipped with Phanteks’ Velcro cable ties. 27.5mm cable management space + additional cable compartment (39mm)..
  • Equipped with Phanteks’ PWM Hub. 2x USB 3.0, 2x USB 2.0, Headphone, Mic, Reset, LED Switch. 2x SSD Bracket Included. Removable HDD Cages..
  • Compatible with Phanteks RGB LED Strips and RGB Motherboards. Asus Aura and Mystic Light Ready..
  • Easy Radiator Installation. Reservoir Mounts. Pump Bracket.
Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

Phanteks 140mm CPU Cooler Fan Upgrade, PWM, 1600 RPM High-Static Pressire Retail Cooling PH-F140HP_WT2 White

  • ...hieve higher air pressure. The redesigned MVB II blades generate better airflow and produces better performance.
  • The PH-F140HP II has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength, Phanteks redesigned the back frame of the PH-F140HP II..
  • With the noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibration noise..
  • Composed by MOSS and SSC systems, Phanteks’ UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise..
  • SSC provides an increase in the bearing’s lifespan and ensures that the fan’s axis is consistently operational and quiet..
  • PH-F140HP II’s PWM functions allow users to adjust speed from 500 – 1600 RPM. Higher speed for performance and lower for silent operation by motherboard control..
  • PH-F140HP II produces high static air pressure allowing for a direct and focusing airflow making them ideal for the densely packed fins of a heat sink..
Check Stock

DEEPCOOL FH-10 Integrated Fan Hub, Powering up to 10 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Header

  • If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..
  • If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1 can be identified by the system..
  • Capable of connecting to 10 PC fans simultaneously for cooling the computer system..
  • Powered by a stable SATA connection to the system PSU for up to 10 fans..
  • Velcro and screw mountings applicable for the tower interiors..
Check Stock

EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans, SATA Power, Only Use One MB Header

  • Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note: Max current limit is 3A in total, check the spec of fan first..
  • In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal..
  • There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis..
  • Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control..
  • If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..
Check Stock

upHere 7-Port 4PIN SATA PWM 5V 3PIN ADDRESSABLE RGB Fan Hub/Splitter for 4-Pin & 3-Pin Case Fans in Black-P7PRGB

  • 01.upHere ARGB PWM Fan Hub - Supports up to 7 Fans (3PIN/PWM 4PIN/5V 3PIN ARGB)), Occupying only One 4-pin M/B FAN Header (System Fan or CPU....
  • 02.upHere P7P Fan hub provides individually addressable RGB lighting with software control for unique lighting effects and colors.5V ARGB Header....
  • 03.Capable of connecting to 7 PC fans simultaneously for cooling the computer system. Each port has its own PWM function and the fan speed can be....
  • 04.Powered by system PSU Sata connection to ensure 12V stable power for up to 7 fans..
  • 05.Easy and Quick Installation with a Compact Design, upHere P7P Fan hub allows you to easily attach on the back of the PC case using pre-installed....
Check Stock

MEIRIYFA 3 Pin 4 Pin Fan Adapter PWM PC Chassis Cooling Fan Hub 8 Way Splitter 12V Speed Controller with 6 Pin Power Port

  • [Expand Fan Interfaces] – Excellent 1 to 8 splitter 8 way 4-pin and 3-pin PWM fan power supply extension hub, it provide a better power supply solution for PC computer case internal motherboard cooling fans..
  • [Function] – Through this hub, the governor can supply power to up to 8 fans, and the rotating potentiometer can adjust the speed of 8 PWM fans at the same time..
  • [Widely Compatible] – For both 4-Pin and 3-Pin fans. If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current connected to the fan shall not exceed the maximum current value of 17A to avoid damage to the governor..
  • [High Performance] – The high-performance fully black circuit board is adopted, the hub is small in size and convenient to use, the material is strong and the resistance is small, which does not affect the fan performance..
  • [Glue Fixation] – The thickened 3M glue is used to fix it, which has strong adhesion, easily fits inside your pc case and can firmly fix the fan hub inside the chassis..
Check Stock

ARCTIC Case Fan Hub - 10-fold PWM Fan Distributor with SATA Power - Black

  • CABLE MANAGEMENT: Case Fan Hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and....
  • SYNCHRONOUS FAN CONTROL: Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are....
  • EXPAND YOUR VENTILATION: Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots.
  • EXTERNAL POWER SUPPLY: The fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth,....
  • TECHNICAL DETAILS: Output: 10 x 4-pin PWM Socket, Output Current: up to 1 A per Port, Input: SATA Power + 4-pin Fan Header, Input Current: up to 4.5....
Check Stock

Cooler Master 1 to 10 4PIN SATA PWM hub Chassis Fan Cable hub Adapter Strong Magnet adsorption is not Easy to Fall Off 1 to 10 PWM HUB

  • 10 sets of PWM fan interface: up to 10 sets of PWM fans can be installed at the same time, convenient installation method, making the installation....
  • SATA power line direct output: cooler master 1to10PWM hub adopts Satan power direct output, which is more concise, more efficient and more stable.
  • Effective cable management: CoolerMaster 1to10PWM hub has 5 sets of fan jacks on the left and right sides, which is convenient for installation and....
  • Powerful magnetic design: CoolerMaster1to10PWM hub adopts super magnetic design, which can be adsorbed on the metal surface of the chassis and can be....
  • Small and exquisite size, save space: small and exquisite shape, save more space, make the internal wires of your case more tidy.
Check Stock

Lian Li LAN2MPX Lancool II Mesh Performance Black

  • 2x 140mm PWM Fan front, 600-1200RPM and 1x 120mm PWM fan rear 600-1500 RPM, to push performance.
  • Top IO 4 steps L M H PWM fan controller to allow easy fan speed adjustment according to the needs.
  • Included fan hub to support up to 6x fans to extend the utilization of the RPM control feature, the.
  • Clean interior design. Cable management 2. 0 cable door covers. smart space utilization for.
  • upgradable - USB 3.1 Type C, HDD Hot SwapI/O Ports:.
Check Stock

12V 4Pin PWM & 5V 3Pin ARGB with SATA 15Pin Power 2-in-1 Hub 6 Way Sync CPU Cooling Fan Addressable RGB Lighting PCB Splitter for Extended Motherboard Interface -Black

  • This is ARGB PWM 2-in-1 6 way hub. Up to 6 sets of Addressable RGB (5V 3pin) plugs and PWM (12V 4pin) plugs to meet your needs of connecting more devices. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color)..
  • This CPU Cooling SATA Hub is powered by SATA 15PIN, which can simultaneously supply power to the fan and 5V 3 pin ARGB products. The motherboard has no power supply burden and can maintain a stable output even at full load..
  • The ARGB of this hub is 5V 3-pin. This type of fan can control a single lamp bead, and realize the effects of running water lamp, splicing and displaying text patterns through programming. Only compatible with 3pin 5V addressable RGB headers or controllers, don't connect to 12V RGB components, otherwise it might burn out..
  • The black hub is perfectly integrated with chassis. Mini and compact, which effectively saves your space, makes cable management easier, and the inside of the chassis is tidy. The adhesive on the back can be used to fix the hub in the chassis, tool-free installation, and not easy to drop..
  • The PWM ARGB hub is equipped with two connecting cables. Both length of the wires is 53 cm. The red port on the hub is a professional port for th....
Check Stock