Top Phanteks Halo Frames Reviews

Phanteks Halos Lux Digital LED 140mm Fan Frame Alum, Black (PH-FF140DRGBA_BK01)

  • The Halos Lux is milled from one single block of aluminum and anodized in Satin Black..
  • There is no compromise on performance. Even high quality fans made from PBT material, like Phanteks’ MP and SP fans, can now be illuminated..
  • Light is spread evenly thanks to high density Digital LED’s and diffuser. Daisy chain all of Phanteks’ Digital RGB products together..
  • Sync the Digital RGB LED lighting with any Digital RGB equipped Phanteks digital RGB and motherboard. Compatible with Asus (Aura Sync), MSI (Mystic light)..
  • The Halos Lux series Digital RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws..
Check Stock

Phanteks PH-EC416PTG_BK Eclipse P400 Steel ATX Mid Tower Case Tempered Glass Edition Satin Black

  • Full Metal Body, Steel Exterior and Tempered Glass Side Panel. Clean interior –PSU Cover & HDDs. 10 color RGB downlight + RGB power light with....
  • Fully Equipped with Magnetic Dust Filters. Innovative Modular HDD System (requires PH-HDDKT_02). 2x Drop-N-Lock SSD brackets included. Long GPU....
  • Full Size PSU support. Removable HDD cage for installation of long PSU's (>270mm)/water-pump..
  • Hidden Front I/O (2x USB 3.0, Headphone, Mic, LED Control, Reset). Clean cable management using Phanteks' preinstalled Hoop-N-Loop cable ties..
  • Optimal airflow - Direct airflow to CPU/GPU. 1x Phanteks 120mm Fan in front. 1x Phanteks 120mm Fan in rear. Supports water-cooling radiators (up to....
Check Stock

HLT PCI- E 3.0 16X Graphics Card Vertical Kickstand/Base Magnetic Standoff DIY ATX case Computer Graphics Card Holder Black with Extension Cord

  • Phanteks patented P.A.T.S (Physical Antioxidant Thermal Shield) technology dramatically increases the cooling performance and reliability of PH-TC90LS....
  • Phanteks patented C.P.S.C Technology is a new innovative forming deposit tht transfers heat onto corresponding metals at a more rapidly rate.....
  • The PH-TC90LS is made to ensure it has the least amount of air and thermal resistance. To prevent mechanical conflicts with other components,....
  • Phanteks PH-F90 PWM Premium fans uses UFB (Updraft Floating Balance) bearing, Nine blades and MAFO (Maelstrom Air-Fort Optimization) drive system to....
  • PH-TC90LS takes less than 1 minute to install. It requires 4 screws and the rotational back plate for the Intel LGA 2011/1155/1156 to tightly secure....
Check Stock

Phanteks RGB LED 4 Pin Adapter, Specified for Cases with Multi Colors RGB Control (PH-CB_RGB4P) Black

  • Compatible with upcoming motherboards with 4pin RGB Header.
  • Allows you to synchronize your Phanteks cases with Multi-colors LED control (Luxe, Mini XL, P400..) and Phanteks Led strip to the motherboards software..
  • Customize and colorize your LED strip and case LED with the use of the motherboards software.
  • Long cable length for easy wiring and cable management.
  • Length: 609mm (24in), Connector Number: 3.
  • Connector Detail:1x RGB LED Extension Connector (12V, G, R, B), 1x Motherboard RGB LED Connector, 1x RGB LED Strip Connector. Terminal Gender:M-FDescriptionPhanteks' RGB LED Adapter is a simple, frustration-free solution to the upcoming RGB integrated motherboards that includes the RGB headers. This adapter will allow you to synchronize and control the lighting of your LED strip and Phanteks cases with the motherboards' lighting software..
Check Stock

Phanteks PH-FF140RGBP_BK01 Halos RGB Fan Frame High density LEDs RGB 140mm fan mounting

  • Illuminate any fan. There is no compromise on performance. Even high quality fans made from PBT material, like Phanteks' MP and SP fans, can now be illuminated.
  • High density LED. Light is spread evenly thanks to high density LED's and diffuser. Easy cable routing. Daisy chain all of Phanteks' RGB products together.
  • Sync RGB lighting. Sync the RGB lighting with any RGB equipped Phanteks case and motherboard. Compatible with Aura Sync, Mystic light, RGB Fusion.
  • Mounting screws included. The Halos RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws.
  • Compatibility: 140 fan mounting. RGB LED type: RGB LED strip hard board , +12V, G,R,B. LED Number: 21pcs.
  • RGB4P connector for motherboard is required and sold separately.
Check Stock

Phanteks 140mm Cooling Fan (PH-F140SP_BK)

  • PH-F140SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength and reduce the vibration occurrence, Phanteks redesigned the back frame of PH-F140SP.. Air flow – 82.1 CFM. Noise level – 19.0 decibels.
  • With the noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibration noise..
  • The new nine high pressure MVB blades are precisely angled to generate a silent controlled airflow. The blades produces a downdraft vortex allowing for greater amount of air passage through and reduce airflow turbulence across the surface of the blades.
  • Composed by MOSS and SSC systems, Phanteks’ UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise..
  • Eight pre-installed rubber pads are now bigger and designed to reduce more vibration..
  • 400mm extension cable included to provide for better cable management and flexibility..
  • PH-F140SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational ....
Check Stock

Phanteks (PH-ES614PTG_BK) Enthoo Pro ATX Chassis, Tempered Glass, Intergrated RGB Lighting, Black

  • Brushed aluminum Look. Clean interior – hidden PSU& HDDs. Tempered glass panel.
  • Easy accessibility to fans and dust filters. Equipped with Phanteks' Velcro cable ties. Optical Drive bay. Reservoir mounts and pump Slots.
  • 2 x USB 3.0 / USB-C GEN 2 / Mic / Headphone / Reset / RGB Switch Front Ports.
  • Compatible with Phanteks RGB LED strips and RGB motherboards. Easy radiator Installation. Reservoir mounts.
Check Stock

Phanteks PH-LEDKT_Combo RGB LED Strip Combo Set - Retail Cases

  • Our Phanteks RGB LED strips are extremely bright and are currently compatible with the Enthoo Luxe, Mini XL, Evolv ATX TG, and P400/P400S. M/B with....
  • Phanteks RGB LED strip has integrated magnets in the silicone housing allowing for easy installation to the metal chassis. For a really secure fit,....
  • The strip is made of flexible PCB material and comes with a silicone housing which is more durable compared to others that uses Epoxy strips..
  • With our 1 orientation connector, you can rest assure that the connectors are in the right position..
  • Input Connector: Strip 4-pin (+12V,G,R,B) connector..
Check Stock

Phanteks (PH-ES916E_BK) Enthoo Elite Extreme Full Tower Chassis Aluminum, Black

  • 4mm sand-blasted aluminum exterior. Tool-less 4mm tempered glass window. Clean interior with aluminum covers – Hidden PSU & Cables. Ambient RGB Illumination.
  • Tri-chamber design – Hidden PSU, Isolated Storage/Cooling Chamber, Main Chamber. Full Size GPU Support. Front I/O with dual system support.
  • Convenient Installation in standing position. Integrated RGB illumination mode and MSI Mystic Light and Asus Aura compatible. Tempered Glass Panel on hinges.
  • 35mm cable management space + additional cable compartment. Equipped with Phanteks’ Velcro cable ties. 2x Phanteks PWM Hubs.
  • Multifunctional cable cover. Swappable panels (performance/silent). Support Dual system (ITX)/ Dual PSU. Vertical GPU mount bracket..
Check Stock

Phanteks PH-ES314ETG_AG EVOLV mATX Tempered Glass Edition Aluminum Exterior RGB LED Illumination Micro Tower Case Gray Anthracite Gray

  • Aluminum body (3mm). Clean interior – Hidden PSU/HDD/Cables. RGB LED illumination. Dual Tempered Glass Panels.
  • Magnetic Tempered Glass Panels on hinges. Quick release panels for easy access. Removable dust filters. Long GPU support (up to 319mm/12.5in).
  • Phanteks Premium fans 140mm. 26mm cable management space + additional cable compartment in bottom. Support Synchronization with RGB Motherboards and Phanteks RGB products.
  • Water-cooling ready – Radiator support up to 280mm(top) and 360mm(front), Pump bracket. AIO water-cooling products up to 360mm.
Check Stock

Phanteks P-GO240MPH_DWT01 Glacier One 240MPH D-RGB AIO Liquid CPU Cooler Infinity Mirror Pump Cap Design 2X Silent 120mm MP PWM Fans 2X D-RGB Halos Fan Frames White

  • High performance water cooling for Sockets LGA 115x, 1366, 2011, 2011-3, 2066, 1200 and AM4, sTRX4*, TR4*(*Threadripper bracket included with CPU)..
  • Pre-filled for plug-and-play installation reliable operation with reinforced braided tube sleeving, 100% pure copper cold plate and PWM controlled....
  • Infinity mirror pump cap design with tempered glass window, integrated D-RGB LED lighting and 2x D-RGB Halos Fan Frames..
  • Dual 120mm MP PWM fans optimized for high static pressure and silent operation..
  • D-RGB lighting can be controlled and synchronized with Phanteks’ D-RGB lighting products and D-RGB equipped cases and motherboards..
Check Stock

Premium Intel LGA1200/115X Retention Kit for Asetek-Based Liquid Coolers – Kit with Premium Finish Plus Easy Installation

  • EASY SETUP AND MOUNTING: The Premium Intel LGA1200/115X Retention Kit provides you the installation hardware you need for easy setup and mounting of Asetek-based liquid CPU coolers/AIOs to Intel LGA1200/115X/13XX-based motherboards.
  • SLEEK AND PROFESSIONAL LOOK with the high quality finish on items in the premium retention kits.
  • KIT CONTENTS: The Premium Intel LGA1200/115X Retention Kit includes 4 standoffs, 4 thumbscrew nuts.
  • 1 optional retention ring clip - compatible with Gen4 Asetek pump.
  • BACKPLATE INCLUDED: The Premium Intel LGA1200/115X Retention Kit also includes a backplate for LGA1200/115X motherboards.
  • COMPATIBLE WITH liquid coolers from NZXT, ASUS ROG, Phanteks, Thermaltake, EVGA, Fractal Design, XPG, MSI, Phanteks, Intel and Cryorig.
Check Stock

Halo Safety Ring Type: Two Sided

  • Double Side Halo Safety Ring For Hospital Beds With Metal Frames.
Check Stock