Top Phanteks Evolv X Release Reviews

Phanteks PH-ES314ETG_AG EVOLV mATX Tempered Glass Edition Aluminum Exterior RGB LED Illumination Micro Tower Case Gray Anthracite Gray

  • Aluminum body (3mm). Clean interior – Hidden PSU/HDD/Cables. RGB LED illumination. Dual Tempered Glass Panels.
  • Magnetic Tempered Glass Panels on hinges. Quick release panels for easy access. Removable dust filters. Long GPU support (up to 319mm/12.5in).
  • Phanteks Premium fans 140mm. 26mm cable management space + additional cable compartment in bottom. Support Synchronization with RGB Motherboards and Phanteks RGB products.
  • Water-cooling ready – Radiator support up to 280mm(top) and 360mm(front), Pump bracket. AIO water-cooling products up to 360mm.
Check Stock

Evolv Magic Climbing Finger Tape - Blue

  • Medical grade, self-adherent tape that is water resistant and breathable.
  • Unlike other adhesive sports tapes, Evolv's magic finger & hand tape sticks to itself rather than the skin with gentle pressure application.
  • Perspiration and water will not loosen the cohesive bond and the porosity permits air circulation.
  • You can snip the tape away easily and cleanly without leaving any sticky residue and uncomfortable pulling of skin or hair.
  • 3/4" x 30 yards (1.9cm x 27m) finger tape with included reusable, embossed Evolv-branded screw top tin holds two 3/4" finger tapes.
Check Stock

Evolv Magic Climbing Hand Tape - Blue

  • Medical grade, self-adherent tape that is water resistant and breathable.
  • Unlike other adhesive sports tapes, Evolv's magic finger & hand tape sticks to itself rather than the skin with gentle pressure application.
  • Perspiration and water will not loosen the cohesive bond and the porosity permits air circulation.
  • You can snip the tape away easily and cleanly without leaving any sticky residue and uncomfortable pulling of skin or hair.
  • 1.5" x 30 yards (3.8cm x 27m) hand tape with included reusable, embossed Evolv-branded screw top tin holds one 1.5" hand tape.
Check Stock

Phanteks 140mm Case/Radiator Cooling Fan (PH-F140XP_BK)

  • Composed by MOSS and SSC systems, Phanteks’ UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise.. Air flow – 85.19 CFM. Noise level – 19.0 decibels.
  • PH-F140XP’s PWM functions allow users to adjust speed from 600 – 1200 RPM. Higher speed for performance and lower for silent operation..
  • Phanteks’ unique fan circuit design provides a Fan Polarity Auto-Restart feature. The sensor inside of the fan will constantly send a series of rectangular signals to your PC M/B indicating that the fan is working correctly..
  • Eight pre-installed rubber pads are now bigger and designed to reduce more vibration..
  • Phanteks PH-F140XP comes bundled with accessories. Includes a 400mm extension cable to improve cable management and 4 to 3 pin adapter for use with a fan controller..
  • Q.S.A adapter also included for settings from 300-900 rpm for a quieter set-up..
  • Helps minimize the vibration and easy to use..
  • Composed by MOSS and SSC systems, Phanteks’ UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise..
  • PH-F140XP’s PWM functions allow users to adjust speed from 600 – 1200 RPM. Higher speed for performance an....
Check Stock

Premium Intel LGA1200/115X Retention Kit for Asetek-Based Liquid Coolers – Kit with Premium Finish Plus Easy Installation

  • EASY SETUP AND MOUNTING: The Premium Intel LGA1200/115X Retention Kit provides you the installation hardware you need for easy setup and mounting of Asetek-based liquid CPU coolers/AIOs to Intel LGA1200/115X/13XX-based motherboards.
  • SLEEK AND PROFESSIONAL LOOK with the high quality finish on items in the premium retention kits.
  • KIT CONTENTS: The Premium Intel LGA1200/115X Retention Kit includes 4 standoffs, 4 thumbscrew nuts.
  • 1 optional retention ring clip - compatible with Gen4 Asetek pump.
  • BACKPLATE INCLUDED: The Premium Intel LGA1200/115X Retention Kit also includes a backplate for LGA1200/115X motherboards.
  • COMPATIBLE WITH liquid coolers from NZXT, ASUS ROG, Phanteks, Thermaltake, EVGA, Fractal Design, XPG, MSI, Phanteks, Intel and Cryorig.
Check Stock

Phanteks (PH-ES614PTG_BK) Enthoo Pro ATX Chassis, Tempered Glass, Intergrated RGB Lighting, Black

  • Brushed aluminum Look. Clean interior – hidden PSU& HDDs. Tempered glass panel.
  • Easy accessibility to fans and dust filters. Equipped with Phanteks' Velcro cable ties. Optical Drive bay. Reservoir mounts and pump Slots.
  • 2 x USB 3.0 / USB-C GEN 2 / Mic / Headphone / Reset / RGB Switch Front Ports.
  • Compatible with Phanteks RGB LED strips and RGB motherboards. Easy radiator Installation. Reservoir mounts.
Check Stock

Phanteks PH-ES614LTG_AG Chassis/Tempered Glass Panel, Full Tower ATX Case, Anthracite Grey

  • Sandblasted aluminum faceplates. Ambient lighting with LED control (10 colors). Clean interior – Hidden PSU& HDDs.
  • Tempered Glass Panel on hinges. Easy accessibility to fans and dust filters. Equipped with Phanteks’ Velcro cable ties. 27.5mm cable management space + additional cable compartment (39mm)..
  • Equipped with Phanteks’ PWM Hub. 2x USB 3.0, 2x USB 2.0, Headphone, Mic, Reset, LED Switch. 2x SSD Bracket Included. Removable HDD Cages..
  • Compatible with Phanteks RGB LED Strips and RGB Motherboards. Asus Aura and Mystic Light Ready..
  • Easy Radiator Installation. Reservoir Mounts. Pump Bracket.
Check Stock

Phanteks Halos 140mm Digital LED Fan Frame,Black (PH-FF140DRGBP_BK01)

  • There is no compromise on performance. Even high-quality fans made from PBT material, like Phanteks’ MP and SP fans, can now be illuminated..
  • Light is spread evenly thanks to high density Digital LED’s and diffuser..
  • Daisy chain all of Phanteks’ Digital RGB products together..
  • Sync the Digital RGB LED lighting with any Digital RGB equipped Phanteks digital RGB and motherboard. Compatible with Asus (Aura Sync), MSI (Mystic light)..
  • The Halos Lux series Digital RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws..
Check Stock

Phanteks Enthoo Pro Full Tower Chassis with Window Cases PH-ES614P_BK,Black

  • Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
  • Appearance: Brushed plastic with an aluminum appearance.
  • Stealth interior: hidden PSU / hidden HDD.
  • The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
  • Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
  • Innovative liquid cooling mounting systems.Closed HDD panel strengthens the chassis’ rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).
Check Stock

Phanteks Halos 120mm Digital LED Fan Frame, Black (PH-FF120DRGBP_BK01)

  • Illuminate any fan. There is no compromise on performance. Even high quality fans made from PBT material, like Phanteks MP and SP fans, can now be illuminated..
  • High density Digital LED. Light is spread evenly thanks to high density Digital LEDs and diffuser..
  • Easy cable routing. Daisy chain all of Phanteks Digital RGB products together.
  • Sync Digital RGB lighting. Sync the Digital RGB LED lighting with any Digital RGB equipped Phanteks digital RGB and motherboard. Compatible with Asus (addressable Aura Sync), MSI (Mystic Rainbow light)..
  • Mounting screws included. The Halos Lux series Digital RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws..
Check Stock

Phanteks Enthoo Pro Full Tower Chassis without Window Cases PH-ES614PC_BK,BLACK NO WINDOW

  • Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
  • Appearance: Brushed plastic with an aluminum appearance.
  • Stealth interior: hidden PSU / hidden HDD.
  • The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
  • Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
  • Innovative liquid cooling mounting systems.
  • Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).
Check Stock

Phanteks Halos Lux Digital LED 140mm Fan Frame Alum, Black (PH-FF140DRGBA_BK01)

  • The Halos Lux is milled from one single block of aluminum and anodized in Satin Black..
  • There is no compromise on performance. Even high quality fans made from PBT material, like Phanteks’ MP and SP fans, can now be illuminated..
  • Light is spread evenly thanks to high density Digital LED’s and diffuser. Daisy chain all of Phanteks’ Digital RGB products together..
  • Sync the Digital RGB LED lighting with any Digital RGB equipped Phanteks digital RGB and motherboard. Compatible with Asus (Aura Sync), MSI (Mystic light)..
  • The Halos Lux series Digital RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws..
Check Stock

Phanteks PH-EC416PTG_BK Eclipse P400 Steel ATX Mid Tower Case Tempered Glass Edition Satin Black

  • Full Metal Body, Steel Exterior and Tempered Glass Side Panel. Clean interior –PSU Cover & HDDs. 10 color RGB downlight + RGB power light with....
  • Fully Equipped with Magnetic Dust Filters. Innovative Modular HDD System (requires PH-HDDKT_02). 2x Drop-N-Lock SSD brackets included. Long GPU....
  • Full Size PSU support. Removable HDD cage for installation of long PSU's (>270mm)/water-pump..
  • Hidden Front I/O (2x USB 3.0, Headphone, Mic, LED Control, Reset). Clean cable management using Phanteks' preinstalled Hoop-N-Loop cable ties..
  • Optimal airflow - Direct airflow to CPU/GPU. 1x Phanteks 120mm Fan in front. 1x Phanteks 120mm Fan in rear. Supports water-cooling radiators (up to....
Check Stock