Top Phanteks Enthoo Luxe Ph Es614ltg bk Reviews

Phanteks Enthoo Pro Full Tower Chassis without Window Cases PH-ES614PC_BK,BLACK NO WINDOW

  • Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
  • Appearance: Brushed plastic with an aluminum appearance.
  • Stealth interior: hidden PSU / hidden HDD.
  • The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
  • Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
  • Innovative liquid cooling mounting systems.
  • Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).
Check Stock

HLT PCI- E 3.0 16X Graphics Card Vertical Kickstand/Base Magnetic Standoff DIY ATX case Computer Graphics Card Holder Black with Extension Cord

  • Phanteks patented P.A.T.S (Physical Antioxidant Thermal Shield) technology dramatically increases the cooling performance and reliability of PH-TC90LS....
  • Phanteks patented C.P.S.C Technology is a new innovative forming deposit tht transfers heat onto corresponding metals at a more rapidly rate.....
  • The PH-TC90LS is made to ensure it has the least amount of air and thermal resistance. To prevent mechanical conflicts with other components,....
  • Phanteks PH-F90 PWM Premium fans uses UFB (Updraft Floating Balance) bearing, Nine blades and MAFO (Maelstrom Air-Fort Optimization) drive system to....
  • PH-TC90LS takes less than 1 minute to install. It requires 4 screws and the rotational back plate for the Intel LGA 2011/1155/1156 to tightly secure....
Check Stock

Phanteks PH-CBRS_FL30 – 300mm Pci-E X16 Riser Cable 180 Degree Adapter, Slim Design, EMI Shielded, Compatible with Enthoo Elite Chassis

  • Compatible with Phanteks enthoo Elite (2nd vertical GPU upgrade). slim design..
  • High quality soldered gold-plated contacts for signal integrity..
  • Flexible sectional design for aggressive orientations and better airflow..
  • Emi shielding cover to reduce interference..
Check Stock

Phanteks 140mm Cooling Fan (PH-F140SP_BK)

  • PH-F140SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength and reduce the vibration occurrence, Phanteks redesigned the back frame of PH-F140SP.. Air flow – 82.1 CFM. Noise level – 19.0 decibels.
  • With the noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibration noise..
  • The new nine high pressure MVB blades are precisely angled to generate a silent controlled airflow. The blades produces a downdraft vortex allowing for greater amount of air passage through and reduce airflow turbulence across the surface of the blades.
  • Composed by MOSS and SSC systems, Phanteks’ UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise..
  • Eight pre-installed rubber pads are now bigger and designed to reduce more vibration..
  • 400mm extension cable included to provide for better cable management and flexibility..
  • PH-F140SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational ....
Check Stock

Phanteks Enthoo Pro Full Tower Chassis with Window Cases PH-ES614P_BK,Black & be Quiet! Dark Rock Pro 4, BK022, 250W TDP, CPU Cooler

  • Product 1: Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
  • Product 1: Appearance: Brushed plastic with an aluminum appearance.
  • Stealth interior: hidden PSU / hidden HDD.
  • Product 1: Cooling: Extreme cooling capacity.
  • The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
  • Product 1: Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
  • Innovative liquid cooling mounting systems.Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).
  • Product 2: Socket compatibility AMD: AM5 / AM4.
Check Stock

Phanteks RGB LED 4 Pin Adapter, Specified for Cases with Multi Colors RGB Control (PH-CB_RGB4P) Black

  • Compatible with upcoming motherboards with 4pin RGB Header.
  • Allows you to synchronize your Phanteks cases with Multi-colors LED control (Luxe, Mini XL, P400..) and Phanteks Led strip to the motherboards software..
  • Customize and colorize your LED strip and case LED with the use of the motherboards software.
  • Long cable length for easy wiring and cable management.
  • Length: 609mm (24in), Connector Number: 3.
  • Connector Detail:1x RGB LED Extension Connector (12V, G, R, B), 1x Motherboard RGB LED Connector, 1x RGB LED Strip Connector. Terminal Gender:M-FDescriptionPhanteks' RGB LED Adapter is a simple, frustration-free solution to the upcoming RGB integrated motherboards that includes the RGB headers. This adapter will allow you to synchronize and control the lighting of your LED strip and Phanteks cases with the motherboards' lighting software..
Check Stock

Phanteks 140mm CPU Cooler Fan Upgrade, PWM, 1600 RPM High-Static Pressire Retail Cooling PH-F140HP_WT2 White

  • ...hieve higher air pressure. The redesigned MVB II blades generate better airflow and produces better performance.
  • The PH-F140HP II has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength, Phanteks redesigned the back frame of the PH-F140HP II..
  • With the noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibration noise..
  • Composed by MOSS and SSC systems, Phanteks’ UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise..
  • SSC provides an increase in the bearing’s lifespan and ensures that the fan’s axis is consistently operational and quiet..
  • PH-F140HP II’s PWM functions allow users to adjust speed from 500 – 1600 RPM. Higher speed for performance and lower for silent operation by motherboard control..
  • PH-F140HP II produces high static air pressure allowing for a direct and focusing airflow making them ideal for the densely packed fins of a heat sink..
Check Stock

Phanteks PH-EC416PTG_BK Eclipse P400 Steel ATX Mid Tower Case Tempered Glass Edition Satin Black

  • Full Metal Body, Steel Exterior and Tempered Glass Side Panel. Clean interior –PSU Cover & HDDs. 10 color RGB downlight + RGB power light with....
  • Fully Equipped with Magnetic Dust Filters. Innovative Modular HDD System (requires PH-HDDKT_02). 2x Drop-N-Lock SSD brackets included. Long GPU....
  • Full Size PSU support. Removable HDD cage for installation of long PSU's (>270mm)/water-pump..
  • Hidden Front I/O (2x USB 3.0, Headphone, Mic, LED Control, Reset). Clean cable management using Phanteks' preinstalled Hoop-N-Loop cable ties..
  • Optimal airflow - Direct airflow to CPU/GPU. 1x Phanteks 120mm Fan in front. 1x Phanteks 120mm Fan in rear. Supports water-cooling radiators (up to....
Check Stock

ML8-12 - 12 Volt 8 AH SLA Battery - Mighty Max Battery Brand Product

  • ML8-12 SLA is a 12V 8AH Sealed Lead Acid (SLA) rechargeable maintenance free battery.
  • Dimensions 5 94 inches x 2 56 inches x 3 94 inches Terminal F1 Listing is for the Battery only No wire harness or mounting accessories included.
  • Compatibility APC Back-UPS ES 750 UPS GT12080-HG FiOS BB Battery SH1228W GT12080-HG for FiOS and UPS APC Back-UPS ES 500 APC BACK-UPS BE750G 750VA APC Back-UPS CS 500 BK500 BK500BLK Elk 1280 for Alarm Systems APC Back-UPS ES BE550G Belkin Residential Gateway RG CyberPower Office Power AVR 685AVR Razor MX350 MX400 Electric Dirt Bike ES500 ES550 ES750G LS500 RBC110 PX12072 APC SU420NET WKA12-8F2 DJW12-8HD TPH12080 F2 Razor E300 E 300 13113640 Enduring 6-FM-7 BSL1075 and more.
  • Rechargeable battery that can be mounted in any position resists shocks and vibration Long lasting high performance in high and low temperatures.
  • SLA / AGM spill proof battery has a characteristic of high discharge rate wide operating temperatures long service life and deep discharge recover.
Check Stock

Phanteks PH-F200SP_BBK, 200mm Premier Case Fan, Frame/Blades, Black

  • ...ve the ability to overcome the airflow restriction caused by high fin density.. Air flow – 110.1 CFM. Noise level – 25.0 decibels.
  • The PH-F200SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength, Phanteks redesigned the back frame of the PH-F200SP..
  • With the noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibration noise..
  • The nine high static pressure MVB blades are precisely angled to generate a focused controlled airflow. The blades produces a downdraft vortex allowing for greater amount of air passage through and reduce airflow turbulence across the surface of the blades.
  • Eight pre-installed rubber pads are now bigger and designed to reduce more vibration..
  • Composed by MOSS and SSC systems, Phanteks’ UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise..
  • SSC provides an increase in the bearing’s lifespan and ensures that the fan’s axis is consistently operational and quiet..
Check Stock

Cuisinart FP-12LP 11 111 Large

  • Fits the following models: 3066 3067 3093 3094 3111 3112 KF140 KF614.
  • Fits the following models: FP-12 FP-12BK FP-12DC FP-12MR FP-12MP FP-12BC.
Check Stock

PHANTEKS PH-TC14PE 5x?8mm Dual Heat-Pipes Dual 140mm Premium Fans and Quiet CPU Cooler with patented P.A.T.S coating

  • ...ons, PATS is able to withstand temperatures of up to 200 degrees Celcius. P.A.T.S is environmental friendly and non-toxic.-Patented. C.P.S.C (Cold Plasma Spraying Coating Technology) is a brand new technologic forming deposit that displaces heat onto corresponding metals at a quicker rate. With this technology, the Phanteks PH-TC14PE enhances thermal conductivity on the soldered surfaces of the heat-pipes through the copper deposits.-Designed with dual tower radiators.
  • the PH-TC14PE has five ψ8mm heat-pipes linearly aligned to ensure optimal cooling. This cooler is made to have the least amount of air and thermal resistance..
  • Phanteks PH-F140 premium 140mm fans uses Updraft Floating Balance (U.F.B) bearing, nine Maelstrom Vortex Booster (M.V.B) blades, and Maelstrom Air-Fort Optimization (M.A.F.O) drive system to achieve massive airflow and perfect dynamic balance. to reduce noise level, the fan emits a low dBA with the support of the anti-acoustic rubber-pad and rubber-bar to help eliminate vibration.-The SoliSku universal mounting kit provides an easy-to-install rotational back plate for Intel LGA 2011/1155/1156/11366/775. AMD AM2/AM2+/AM3/3+/FM 1 ( stock back plate required ). -The PH-NDC is a superb quality thermal compound for heat sinks. It is ....
Check Stock

Rexnord Falk Steelflex 0775806 1040T10 Grid Coupling Cover

  • The popular T10 design features a two piece horizontally split cast aluminum cover that provides for the easiest installation and servicing..
  • Five year warranty on Falk Steelflex Couplings when lubricated with Falk LTG Grease and used with Falk hubs, covers, and grids..
  • Size 1040T horizontally-split cover for T10 Series close-coupled double-flexing coupling..
  • When lubricated with Falk Long Term Grease (LTG) a Falk Steelflex Coupling does not require re-lubrication for five years..
Check Stock