Top Ph Meter With Calibration Solutions Reviews

Digital pH Meter with ATC pH Tester, 3 in 1 pH TDS Temp 0.01 Resolution High Accuracy Pen Type Tester, Water Tester for Water, Wine, Spas and Aquariums

【3-in-1 pH Meter】pH meter has a three-in-one function, which can measure PH, TDS and temperature with high precision at the same time. All-round measurement of water quality to ensure healthy water quality..
【Automatic Calibration pH Tester】With high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. And pH meter uses a 3-point calibration method to calibrate the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18. You can calibrate effortlessly to ensure the accuracy of your measurements..
【High Accuracy Water Tester】High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response. Green Backlit LCD Design guarantees that you can read the measuring results in any condition. One-button lock reading function helps lock reading even if the pH Meter is taken out of the sample!.
【Automatic Temperature Compensation Digital pH Meter】No longer need to pay attention to the temperature of testing liquid, pH meter can accurately determine the pH value of the sample in the temperature range of 32°F-140°F(0°C-60°C), so as to solve the inaccurate problem caused by changing the liquid temperature..
【Pocket Size Water pH Tester】 You can use this small Pocket S....

Check Stock

Sper Scientific 860040 Turbidity Meter

... high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response.One-button lock reading function helps lock reading even if the tester is taken out of the sample!.
✅Automatic Calibration - The digital ph meter for water uses a 3-point AUTOMATIC calibration method, calibrating the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18 to ensure the accuracy of your measurements..
✅Automatic Temperature Compensation - No longer need to pay attention to the temperature of testing liquid, Allprettyall ph tester digital can accurately determine the pH value of the sample in the temperature range of 0 °C-60 °C (32 °F-140 °F), so as to solve the inaccurate problem caused by changing the liquid temperature..
✅Wide Application-Allprettyall water quality tester designed in pH and temperature can be measured simultaneously with high precision. Omni-directional measurement of water quality to ensure the health of water quality! The ph meter digital water tester is ideal for drinking water,daily household,hydroponics,sewage, lab teaching and ANY water sample..
✅Easy To Carry And 100% Quality Guarantee - Small pocket....

Check Stock

RCYAGO Digital PH Meter with ATC, 4 in 1 pH/EC/TDS/Temperature Meter 0.01 Resolution High Accuracy Pen Type Tester, Water Quality Tester for Pools, Drinking Water, Aquariums

▶ 【Notification】Calibrate once per week if you often test solution of PH 003c4 or 003e10, or once per half month for neutral solutions. The 250ml calibration solution for multiple uses (10ml or so each time). Then rinse the electrode with pure water before next test. Rinse and rest 3-5 min before conversing from strong acid to strong alkaline and vice versa..
▶ 【Automatic Calibration】 We make your job faster and easier than ever with this convenient PH tester! With the 3-point calibration procedures, your PH testing device will automatically identify the calibration solutions to give you your reading in a snap..
▶ 【Automatic Temperature Compensation】 Temperature can affect reading levels, our PH meter's automatic temperature compensation can ensure that you're getting the best possible reading. Unlike other PH metersthat only have a range of 0-50 degree, ours has a even better range of 0-70 degree, so you can test with confidence in any environment..
▶ 【Clear Digital Display with Alerts】 Tired of squinting at a small screen to get your readings? Enjoy this PH meter's large, backlit LCD screen that displays the information in an intuitive layout so you can still see even in low visibility situations. When the PH value is lower tha....

Check Stock

General Hydroponics Ph 4.01 & Ph 7.0 Calibration Solution Kit, 8 oz

2 Bottles - 1 Each Of Ph 4.01 & Ph 7.0 Calibration Solution.
Highest Quality Electronic Meter Reference Solutions.
Each Batch Is Checked To Ensure Calibration.

Check Stock

Acme Analytical Solutions pH 4 and 7 Buffer Solutions, 2 Gallons Total, pH Meter Calibration Solution, NIST Traceable Reference Standards, Designed for All pH Meters, 2 x 3.8 Liters, pH Buffer Combo

OPTIMAL CHOICE: The ACME pH 4 and 7 buffer solution is essential for measuring the pH level of any substance with a meter and electrode. These professionally made pH buffers are stable and resistant to change, so you can obtain accurate results every time..
READY TO USE LIQUIDS: Our pH 4 and 7 calibration solutions are ready to use and do not require dilution..
PREMIUM PACKAGING: The products come in heavy-duty gallon containers. No need to worry about leakage during shipping. Each gallon will have a lot number and expiration date..
QUALITY STANDARD: All of our pH buffers are traceable to NIST (National Institute of Standards and Technology, USA).
UNIVERSAL SOLUTION: These pH calibration solutions can be used with most pH meters. pH 7 is color coded yellow. pH 4 is color coded red..

Check Stock

CAMWAY Digital PH Meter Water Ph Tester ATC 3 in 1 PH TDS Temp Water Quality Tester for Drinking Water, Pool, Lab, Food Processing, Aquarium, Pond, Beer Brewing

3-in-1 MODE PH Tester: Measure PH, TDS and Temp value accurately, Let you know water quality clearly to ensure your family members’ health,PH Measuring Range:0-14 pH,TDS Measuring Range:1-9990ppm, 0-9990µs/cm,Temperature Measuring range:0.1- 80.0°C, 32.0-176.0°F.
ATC Specially Design: With automatic temperature competition function, Digital PH Meter could accurately read the pH value of the sample in the temperature range of 32 °F-140 °F.
Solve the inaccurate measuring problem caused by the change of liquid temperature.
Automatic Calibration: Features a three-point calibration, the PH Water Pen could automatically identify the calibration solutions of PH 4.00, PH 6.86 and PH 9.18.
High Sensitive Probe Accuracy: Because of the high sensitive probe, You could get a full measurement range of 0-14 pH, 0.01 pH resolution, Besides, Green backlit guarantees that you can read the measuring results in any condition.
Provide water quality monitoring, high-precision size water quality tester for drinking water.

Check Stock

Digital pH Meter, Dr.meter 0.01 Resolution High Accuracy PH Tester, Auto Temperature Compensation pH Testing Pen with Backlit Two-Color LCD Display and Data Hold, 0-14pH Measurement Range Water Tester

...m chloride powder into 20ml of pure water and mix well. Then put the probe into the solution for 24 hours, take it out and clean the residual solution on the surface of the sensitive bulb. Now, you can start to calibrate. (Note: If the sponge is wet enough, please skip this step.).
DURING USE: If there is inaccurate calibration, repeat the step of 'Before Use'. If using your own potassium chloride powder, prepare the solution by adding 61.5g of KCL into 250ml of water. Then, put the probe into the solution for 24 hours, take it out and clean the residual solution on the surface of the sensitive bulb. Now, you can start to calibrate..
AFTER USE: To ensure the activity of the sensitive bulb, add a drop of newly prepared potassium chloride solution into the sponge inside the probe cover. Also, to better maintain the activity of the sensitive bulb, add the solution to the sponge every two months..
▶ 【Notification】Calibrate once per week if you often test solution of PH 10, or once per half month for neutral solutions. The 250ml calibration solution for multiple uses (10ml or so each time). Then rinse the electrode with pure water before next test. Rinse and rest 3-5 min before conversing from strong acid to strong alkaline and vice versa..

Check Stock

Chi c'è...c'è

Starter set with portable, water-resistant meter for testing pH, electroconductivity, and total dissolved solids, provided with solutions and sachets.
Calibration check function to validate instrument performance.
Automatic temperature compensation (ATC) to eliminate the need for extra calculations.
Alert system when low battery and potential measurement error.

Check Stock

Sudoku 10,000 Trial

Starter set with portable, water-resistant meter for testing pH, electroconductivity, and total dissolved solids, provided with solutions and sachets.
Calibration check function to validate instrument performance.
Automatic temperature compensation (ATC) to eliminate the need for extra calculations.
Alert system when low battery and potential measurement error.

Check Stock

Digital PH Tester for Water- PH Meter High Accuracy Water Quality Tester with ATC, 0.01pH Resolution 3 in 1 PH TDS Temp for Household Drinking Water, Hydroponics, Lab, Aquarium by ORAPXI

... high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response.One-button lock reading function helps lock reading even if the tester is taken out of the sample!.
✅Automatic Calibration - The digital ph meter for water uses a 3-point AUTOMATIC calibration method, calibrating the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18 to ensure the accuracy of your measurements..
✅Automatic Temperature Compensation - No longer need to pay attention to the temperature of testing liquid, Allprettyall ph tester digital can accurately determine the pH value of the sample in the temperature range of 0 °C-60 °C (32 °F-140 °F), so as to solve the inaccurate problem caused by changing the liquid temperature..
✅Wide Application-Allprettyall water quality tester designed in pH and temperature can be measured simultaneously with high precision. Omni-directional measurement of water quality to ensure the health of water quality! The ph meter digital water tester is ideal for drinking water,daily household,hydroponics,sewage, lab teaching and ANY water sample..
✅Easy To Carry And 100% Quality Guarantee - Small pocket....

Check Stock

CIZTADA Smart PH Tester for Water Hydroponics Digital PH EC TDS Meter with ATC High Accuracy Multi-Functional Water Tester for Indoor Plant Grow, DWC, Wine, Pools& Spas and Aquariums

10.01-19.99 mS/cm, TDS 0-9990 ppm. it works for hydroponics, indoor plant grow, DWC, drinking water, beer brewing, winemaking, laboratory, pool& spa, aquarium and etc liquid testing. Notice: It is not suitable for soft solids testing..
【Automatic Calibration】Smart PH meter adopts a three-point calibration method and equipped with standard calibration powder. It can automatically identify calibration solutions of PH 4.00, PH 6.86 and PH 9.18. simple calibration and quick setup. Notice: Always calibrate PH 6.86 first. Then calibrate PH 4.0 or 9.18 after PH 6.86..
【4 in 1 Multi-Functional】4 in 1 multi-functional tester professional measurement PH, TDS, EC and TEMP. Get all data on the app at the same time, and simplifies the complicated measurement steps. It uses the latest technology to avoid the reading all over the place. The readings are more stable..
【Data saving and Sharing】Save all the measurement data, share the data with others, and connect to a printer to print the data. Make the testing work toward more efficient. It supports backlight control by mobile app, which is very easy to....

Check Stock

YINMIK YK-P01 pH Tester Digital pH Meter for Water Hydroponics, Accurate pH Temp Meter with ATC for Pool, Spa, Hot Tub, Indoor Plants, Drinking Water, Wine Beer Home Brewing, Aquarium

to measure pH of your well water , alkaline tap water and other drinks ..
[Accurate pH Tester with Effective ATC] Built with stainless steel temperature sensor, YK-P01 pH meter has an effective temperature compensation (ATC) function, which ensures the rapid response and accurate test results..
[Easy Calibration for YINMIK pH Tester] Supporting 3-point auto calibration, following the instruction manual can easily achieve 4.00, 7.00, 10.01 auto calibration. Don't worry about the calibration solution, you can easily configure up to 500ml of calibration solution for each standard using the calibration powder included in the package. In addition, you can also purchase calibration powder from the YINMIK store on Amazon at an affordable price..
[More User-friendly Designs] Backlights ensures you can use the product in a dimly lit working environment. HOLD/TEMP button can be used for reading lock, attribute to this function, the reading will not disappear after the pH meter leaves the test solution..

Check Stock

Karl Fischer Titrator Auto MICROPROCESSOR Titrimeter Moisture Tester

range: -2.00 to 14.00 pH, 32 to 122˚F (0 to 50˚C).
Auto. Power-Off: 8 minutes without operation.
Easy 1-3 points auto. calibration, recognizes 5 types of solutions (1.68, 4.00, 7.00, 10.01, 12.46).
Auto Temp. Compensation (ATC) ensures accuracy in various temperatures (32-122˚F).
High quality replaceable glass pH probe, suitable for regular water solutions e.g. pools&spas, hydroponics, environmental monitoring, cooling towers, beverage, etc..
Large LCD with 3 backlit colors (indicating different modes), dual display of temp./pH, and reminders of completed calibrations and stable readings.
COMPLETE KIT with READY-TO-USE calibration solutions, calibration bottles, storage solutions, AAA batteries, and a lanyard all in a rugged portable case.

Check Stock