Top Pgun Vise Reviews

ATLIN Vise Jaws 6' - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

  • Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials.
  • Easy Install – The soft jaws attach to your vise with 3 neodymium magnets.
  • Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings.
  • Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise.
  • Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details.
Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • MADE IN USA – The bench vise jaw re-imagined from the ground up and built to a higher standard in the USA. New design innovations unique to Frictionworks non-marring soft jaws and a limited lifetime warranty..
  • SUPERIOR HOLD – 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
  • EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
  • ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching,....
Check Stock

Riverruns Fly Tying Vise

  • Aventik quality fly tying vise, made of hard andoziezd aluminum body and hard chromium carbon steel jaw materials can for a long time use. It is light weight only 9.63OZ (273g), compact and easy for travel..
  • This is a extremely durable and simple single lever action rotary fly tying travel vise to minimize weight whilst retaining tensile strength and durability, with hardened and tempered steel jaws. The vise is accompanied by a sturdy C-clamp to help anchor it in place. The in-line head assembly rotate 360 degrees, this allows the tier to view the fly from all angles, to finish fly tying without removing the hook. By rotating the screw, height of the vise can be adjusted..
  • The hard chromium carbon steel jaw accommodate size #22 to #3/0 fly hooks. Please note that this is an approximation as the gauge of the wire used to manufacture fly hooks do vary from brand to brand. We cancelled extra midge jaw program after first butch testing, it is not necessary. Since this Standard jaw has all the functions..
  • Length: 8.6 inch (21.5cm). Color: silver + black color. The vise is ideal for a beginner wishing to upgrade to a rotary vise or an experienced fly tier looking for an inexpensive vise or lightweight travelling vise for that trip away..
Check Stock

Rockler Quick Release Woodworking Vise Clamps for Woodworking (12”) – Heavy-Duty Bench Vise Woodworking – Quick Wood Vise for Workbench – Easy to Install Workbench Vise with Hardwood Handle

  • Quick Release Vise: Sturdy guide rods keep the clamp faces neatly parallel, while the quick-release feature lets you slide the woodworking vise all the way open with an easy 1/4 turn..
  • Unique Design: This unique end vise for the workbench ensures smooth & efficient operation making this woodworking vise the most versatile and frequently used tool in your workshop..
  • Includes Hardwood Handle: The extra-wide 12" O.C. Guide rods provide maximum resistance to racking, while the extra-wide 17-1/2" woodworking bench vise handle plate delivers maximum stability to handle any project..
  • Widely Applied: The woodworking quick vise is suitable for home, woodworking studios, teaching equipment, and fixed for processing wood. This woodwork vise can also be used as a front vise.
  • Easy To Install: Our woodworking vise is easy to install with included instructions. Before installing carefully read the woodworking vise quick release PDF. (mounting hardware not included).
Check Stock

Rockler Quick Release Front Vise – 9” Woodworking Vise Dual Guide Rods Eliminate Racking – Easy to Operate Wood Vise for Home, Studios, Teaching Equipment - Bench Vise Woodworking

  • Woodworking Vise For Workbench: This powerful workbench wood vise is perfect for custom workbenches. Sturdy dual guide rods eliminate racking, while the quick-release feature lets you slide the vise all the way open or closed with an easy 1/4 turn..
  • Convenient Design: Slides open or closed in seconds! You can easily mount this workbench wood vise. The 9-inch guide bar's convenient design makes it easy to work and holds things more firmly..
  • Solid Construction: The woodwork vise has an iron and steel structure. The guide rods provide absolute resistance to racking, while an extra-wide 9" wide handle-plate delivers maximum stability to handle any project. This vise for woodworking also has a solid hardwood handle..
  • Easy To Use: Simply pull up on the handle and hold, this will cause the bench front vise nut to disengage. Adjust the wooden jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the front..
  • Widely Applied: The workbench vise clamps for woodworking are a great solution for wood shops and woodworking studios. Our quick release vise bench is easy to mount with 1/4" lag bolts (not included)..
Check Stock

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

  • These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
  • Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
  • This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
  • This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
  • These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock

VEVOR Woodworking Vise, 9 Inch Woodworking Bench Vise Heavy-Duty Cast Iron Wood Working Vise, Quick Release Woodworker's Vise 10' Jaw Opening, Front Screw Vise for Woodworking, Cutting, and Drilling

  • 9 Inch Professional Use: Jaw width: 9"/230 mm. Jaw opening: 10". Throat depth: 4". Weight: 35.0 lbs. Our professional-grade woodworking vise is built to exact specifications for optimal performance. Get ample holding power and increase your cutting accuracy with half the effort..
  • Superior Iron Structure: Our heavy-duty woodworking bench vise is constructed out of cast iron and has polished guide rods designed for rugged use and extended life. The end stop prevents the vise from being opened too far..
  • Convenient Operation: The quick-release mechanism enables you to utilize this woodworker's vise quickly and efficiently. Pull up on the handle and hold.
  • this will cause the vise nut to disengage. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product..
  • Simplified Installation: This wood working vise comes with pre-drilled holes in the baseplate for quick mounting to your workbench or machine table. The jaws are also pre-bored to enable the installation and attachment of custom non-marring jaw faces to secure workpiece materials..
  • Widely Applied: The woodworking front vise is suitable for home, woodworking studios, teaching equipment, and fixed for process....
Check Stock

Yost Vises LDPV-6 Drill Press Vise | 6 Inch Jaw Width Portable Vise | Blue

  • DRILL PRESS VISE: Yost Vises LDPV-6 6-inch Drill Press Vise is crafted from cast iron. Durably light-weight and portable with texture jaws..
  • TECHNICAL SPECS: Jaw Width 6” (15.24 cm), Jaw Opening 5.75" (14.605 cm), Throat Depth 1" (2.54 cm), Slot Width: 0.6" (1.52 cm), Slot centerline: 7.15" (18.16 cm)..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
  • SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all ins....
Check Stock

Yost Vises 750-E Multi-Jaw Rotating Vise System | 2 in 1 Multipurpose Bench and Pipe Vise | Secure Grip with Swivel Base | Made with a Combination of Ductile Iron & Hardened Steel | Medium Blue

  • MULTI-JAW VISE: The Yost Vises 750-E 5 Inch medium duty 60,000 PSI ductile iron cast vise has a dual jaw system equipped with a bench jaw to perfectly secure your wood or metal works as well as other manufacturing applications and a pipe jaw for your piping and tubing projects such as cutting or threading. Also has a large anvil work surface..
  • TECHNICAL SPECS: Jaw Width 5" (12.7 cm), Jaw Opening 5" (12.7 cm), Throat Depth 3" (7.62 cm), Min Pipe Capacity .375" (0.9525 cm), Max Pipe Capacity 2.5" (6.35 cm)..
  • SWIVEL BASE AND VISE HEAD: 360 Degree rotatable swivel base with dual lockdowns. Head of vise rotates a full 360 degrees..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over....
Check Stock

Yost Vises M7WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 7 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

  • WOODWORKING VISE: The Yost Vises M7WW 7-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 7" (17.78 cm), Jaw Opening 8" (20.32 cm), Throat Depth 3" (7.62 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close and turn the vise handle counterclockwise. To use the quick-release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
  • SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual..
Check Stock

Wedge Guys Rubber Vise Clamp for Golf Club Repair Regripping Reshafting Refinishing Custom Refurbishment & Replacement – Snugly Protects All Golf Club Shafts, Wedges Irons Drivers Putters & More

  • The Rubber Vise Clamp by Wedge Guys is an essential tool for those looking to keep their golf clubs protected while repairing, reshafting, refinishing, refurbishing, replacing, or regripping golf clubs in a bench vise..
  • HOLDS FIRM – At Wedge Guys we believe a firm shaft is better! The side ribs on the rubber vise clamp increases friction in your vise with less pressure while the diamond channel locks your shaft in place, keeping your club shaft more firm and steady while you work..
  • PROTECTED – Work on your golf clubs without worry! The Wedge Guys rubber vise clamp will help protect your golf club shaft against marring and guard against breakage..
  • MULTI-USE – The Wedge Guys vise clamp is 3.5” long, Made in the USA, and great for a variety of applications for use with any golf clubs including wedges, irons, drivers, putters, and more..
  • **Although the rubber vise clamp is made of high-grade thick rubber, prevents slippage, and keeps your club tight and protected in the vise during repair, be sure not to overtighten**.
Check Stock

VENTURES FLY CO. | Rotary Fly Tying Vise with Pedestal Base for Fly Fishing Kit | Tool for Tying/Making Flies with Materials: Marabou, Tungsten Beads, Hook, Feathers, Hackle, Using Bobbin & Scissors

  • ✔ TRUE 360° ROTATION - The Flysmith fly tying vise rotates 360° around a single axis point. Allowing you to wrap materials around the hook with greater accuracy and efficiency. So you can eliminate tiresome hand-over-hand wrapping. Dual Adjustability Knobs allow you to change the tension of the rotation. From rock solid to near frictionless. Large Crank Handle allows for a firm grip when using the fly tying vise's rotary function..
  • ✔ DURABLE & VERSATILE JAWS - Your vise only has one job – and it better do it well...holding the hook! The jaws on the Flysmith are made of a fine, hardened steel with anti-corrosive properties. Your jaws will last for life or we'll replace them under our lifetime warranty. The jaw is adjustable to accomodate a wide range of hooks size 28 - 4/0. Lastly, the vise has a smoothly balanced tension lever to add the perfect amount of tension to tightly hold the hook without slipping..
  • ✔ LARGE PEDESTAL BASE - Vise sits on a large, heavy pedestal base. To securely hold your vise in place – without movement. Two cutouts easily store hooks and beads when tying. The vise is protected by a special protective coating tha....
Check Stock

Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue

  • COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
  • TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
  • SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....
Check Stock