Top Pertronix Ignitor Volt Reviews

(KAS) Viking Gas Range Oven Stove Cooktop Flat Ignitor Igniter PB040001

  • Gas Range Oven Replacement Viking Ignitor AR04001.Replaces part # PB040001..
  • Included with this ignitor is:1 Ignitor/2 Ceramic Wire Nuts/2 Wire Assemblies, with Female Insulated Terminals.
  • This is a Flat Bar Syle Ignitor./The White Ceramic part of the ignitor measures 2-1/4" Long..
  • The Ignitor part (the part that glows) measures 2" Long.The overall length from end of ceramic to end of the metal bracket is 4-1/2"..
  • The 2 wires measure 12-1/2" Long from terminal end to ceramic..
Check Stock

767A-380 44744-2 601 41-604 for Norton Igniter White Rodgers Furnace Ignitor XBM

  • 767A-378 Furnace Hot Surface Ignitor for Norton 601 601TB 20165702.
  • Hot Surface Furnace Ignitor stock # 767A-378..
  • This igniter replaces Robertshaw # 41-602 Norton # 601, 601TB & OE # 20165702..
  • This Ignitor has a 2-1/4" long from bracket to end of ignitor..
  • 5" Wire Leads with Plug, wire nuts included..
Check Stock

767A-378 White Rodgers Furnace Hot Surface Ignitor for Norton 601 601TB 20165702

  • 767A-378 Furnace Hot Surface Ignitor White Compatible with Norton 601 601TB 20165702.
  • Includes (1) Furnace Hot Surface Ignitor as pictured.
  • Part number # 767A-378. This igniter Compatible with Robertshaw # 41-602 Norton # 601, 601TB & OE # 20165702..
  • This Ignitor has a 2-1/4" long from bracket to end of ignitor. 5" Wire Leads with Plug, wire nuts included. 120V..
Check Stock

SHINESTAR Universal Grill Ignitor 3 Outlet for Charbroil BBQ Grillware GGPL-2100 Ducane Affinity 3100 and More Easy to Install

  • CSA Certified Universal Spark generator BBQ Gas Grill Replacement 3 Outlet 1.5 volt "AA" Battery Push Button Ignitor(Battery not include).
  • Replacement for Charbroil models: 463215512 463215513 463215712 463215713 463215714 463226514 463230510 463230511 463230512 463230513 463230514....
  • Replacement for Nexgrill models: 720-0718A 720-0718B 720-0718N, For Brinkmann models: 810-8425-S 810-9425-W, For BBQ Grillware models: GGPL-2100....
  • Replacement for Backyard Grill models: BGB390SNP BY12-084-029-79 GBC1128W, Grill King models: 810-8425-S,Ducane models: 3100 Affinity 3100,Uniflame....
Check Stock

Round Gas Range Oven Ignitor for GE 41-208 ER4342528 SGR401 SGR400

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

Gas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

GasSaf Universal 3 Outlet Spark Generator Push Button Electronic Igniter Ignitor BBQ Gas Grill Replacement for Charbroil Ducane Kenmore Master Chef Backyard Grill BBQ Grillware GGPL-2100

  • Universal Spark generator BBQ Gas Grill Replacement 3 Outlet 1.5 volt "AA" Battery Push Button Ignitor(Battery not include).
  • 7/8" diameter mounting hole. CSA Certified, Durable and Lasts Longer.
  • Replacement for Nexgrill:720-0718A、720-0718B、720-0718N;Replacement for Backyard....
Check Stock

HID Headlight Xenon Ballast Ignitor - Replaces 33129-S0K-A01 33129-SCC-003 33129-SEA-003 W3T10571 - Compatible with Acura Honda & Mazda Vehicles - MDX TL TSX RDX Odyssey S2000 3 CX-9

  • Replacement HID OR Xenon Ballast Ignitor - is responsible for supplying power to your headlight's bulb. Overtime your HID Ballast Inverter can fail....
  • Compatible Replacement for Acura, Honda & Mazda Vehicles - 2013 - 2015 ILX | 2012 - 2013 MDX | 2007 - 2015 RDX | 2004 - 2005, 2012 - 2014 TL | 2004 -....
  • Replaces Part# 33129-S0K-A01, 33129-SCC-003, 33129-SEA-003, W3T10571 - Each of your vehicle’s headlights has its own ballast ignitor. These ballasts....
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part. This AA Ignition HID Xenon Ballast Ignitor is a direct replacement for the ballast....
  • Lifetime Warranty - This HID Xenon Ballast Ignitor comes complete with a lifetime warranty. If the ballast ignitor ever fails simply contact us for a....
Check Stock

PP200 PP200SC HA1000 Reddy Desa Ignitor Kerosene Heater by Ministry of Warehouse

  • ASKFD PP200SC Ignitor Heavy Duty Replacement for PP200 Ignitor HA1000 Ignitor 102548.
Check Stock

VI4 2 PAK Gas Oven Range Ignitor for PB040001 Viking

  • Gas Range Oven Replacement Viking Ignitor AR04001..
  • The White Ceramic part of the ignitor measures 2-1/4" Long..
  • if you have any questions about the product and its models. contact us and we will help you.
Check Stock

(NEW Part) Gas Range Oven Ignitor for Viking Range replacement for PB040001 AR04001

  • Set of Gas Range Oven Ignitor part number AR04001..
  • with the purchase of quantity 1 of this listing you will receive quantity 1 ignitors..
  • These are a replacement Viking Ignitor, part number PB040001..
  • This is a Flat Ceramic Bar with a Round Style Ignitor..
Check Stock

SUNKISTCOOK 2 Packs Hot Rod Igniter Kit Replacement for Traeger Wood Pellet Grill and Smokers BBQ Pro Parts Compatible with Most Traeger Grills and Pit Boss Pellet Stove

  • Located at bottom of firepot (Professional grill accessories).
  • Compatible with Traeger 070, 075, Texas Elite Series, Pro 22, Pro 34, Lil Tex Elite Series, BBQ Series and More, also Compatible with Pit Boss Pellet....
  • 200 watt/120 volt, 24" wire lead. Only 1/8 to 1/4 inch should be showing in firepot. Igniter the Hardwood, making starting your grill as simple as....
  • Keep fire going, get delicious flavor with hardwood fuel..
  • 2 pieces replacement ignitor kit replacement for Traeger wood pellet grills, equipped with 2 pieces fuses, which can help you to replace the old or....
Check Stock

2 Pack Replacement for Pit Boss Hot Rod Ignitor Kit, Hot Igniter Kits Compatible with Pitboss& Camp Chef Pellet Grill, Comes with 2pc Fuses

  • REPLACE ORIGINAL IGNITION RODS - Compatible with most Pit Boss Grill models(Except PTG), Camp Chef and Oklahoma Joes Rider DLX Wood Pellet Grills models..
  • INSTALLATION TIPS - Hot rod connects in the base of the fire pot, to avoid damage to the ignition rods, only put the hot rod igniter 1/8-1/4 inch into the burn pot..
  • HEATING ELEMENT DETAILS - 200 watt/ 120 volt, 24" wire lead, grill Hot Rod Ignitor comes with 2pc fuses..
  • KEEP THE BARBECUE FIRE - Just press the switch, the grill igniter can re-ignite the hardwood, allowing you to enjoy a delicious barbecue..
  • FRIENDLY SERVICE - If you have any questions, please contact us through Amazon Messenger..
Check Stock