Top Performance Valve Springs Reviews

Powerbuilt Valve Spring Compressor Tool, Remove and Install Valve Springs and Retainers, Compressing, for 3/8 Inch and 7/17 Inch Studs - 940541

  • Simple effective and powerful tool for compressing high performance valve springs.
  • 12" long handle offers plenty of leverage for compressing springs.
  • Stud mount for 3/8 and 7/16 inch rocker studs.
Check Stock

67605 Valve Spring Compressor Tool Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks

  • Bolts and nuts Kit built from 3/8" Steel and Precision CNC Machined for a great fit and Durability. Performance levels are 10.9, 10.9 and 12.9, much better than the other 8.8..
  • Upgrade manufacturing, T - shaped parts are marked with "TOP" for ease of use. This Valve Spring Compressor Kit is a great helper to remove old stock valve springs and install new valve springs..
  • This tool kit is for 4.8, 5.3, 5.7, 6.0, and 6.2L LS Engines and is a must when it comes time to install a new set of valve springs!.
  • OE 67605, will be compatible with any LS engine for Firebird, Silverado, Camaro, GTO, Trans am, Corvette, CTSV, Sierra, Tahoe, Suburban, Pontiac G8 GT and more. Also compatible with Dodge Ram 318 360 5.2 5.9 Engine (but need to use your original bolts)..
  • *Springs are not included in the product. Read the instructions included in the package first. Tips: Adding lubricant will work more perfectly. It is not recommended to buy cheaper alternatives, which will not last long. Thanks!.
Check Stock

COMP Cams 102200 Xtreme Energy 230/236 Cams for Ford 4.6/5.4L Modular 2 Valve

  • SOHC - Xtreme Energy: Mild Street performance, 3.23-3.55 gears. Good torque and power, noticeable idle. Requires custom tuning..
  • 268/274 Advertised Duration, 230/236 Duration @ .050 inch, .500 inch/.500 inch Lift, 114 Lobe Separation.
  • Requires part #26113-16 valve springs and either 792-16 steel retainers or 791-16 titanium retainers.
  • Part #26125-16 high load valve springs also available.
Check Stock

UnayKolb Small Block Chevy 1.5 3/8 Stainless Steel Roller Rocker Arms Sbc 305 350 400

  • Application:265 V8 1955-1957///267 V8 1979-1982///283 V8 1957-1967///302 V8 1967-1968///305 V8 1976-1986///307 V8 1968-1973///327 V8 1962-1969///350 V8 1967-1986///400 V8 1970-1980.
  • These small block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55″ valve springs..
  • Specially cast and machined for larger valve springs and retainers Light weight with integral pushrod seat.
  • Oversize trunions and full roller precision needle and cage bearings More needle bearings for increased performance and rocker life CNC machined pushrod cups and heat-treated Cr40 roller tips Internal oiling system for long lasting performance H.D. Polylocks included.
Check Stock

Stud Mount Valve Spring Compressor Fits For All 3/8 and 7/16 Rocker Studs Springs Removal Tool 66784 62370

  • 【Fitment】 This valve springs quick tool universally fits for removing and Installing valve spring compressors with 3/8 and 7/16 Studs..
  • 【Function】 With this efficient assembly tool, the job of replacing a mount valve springs would be much easier and faster..
  • 【Save-effort Springs compressor】This tool consisted of two parts: a 12 inches steel leverage head and 9 inches metal bar with a smooth rubber....
  • 【Easy install valve keeper】When you compress the springs, you can keep them in a lock position, then you can reinstall the keeper through the....
  • 【Satisfaction Guarantee】Camoo aims to provide excellent products and the best service for customers. You can simply return it if you are not....
Check Stock

3mirrors LS Valve Springs, Performance Racing Valve Springs Compatible with ALL LS Engine 4.8 5.3 5.7 6.0 6.2 (.600'' lift max)

  • ✔Suitable for ALL LS engine, the valve seat pressure performance is better than OEM12499224..
  • ✔Key Features: Open Load: 318lbs@ 1.200in..
  • Spring Rate:313 lbs./in.. Perfectly suitable for the parameters of LS engine. Excessive spring pressure can easily damage the engine..
  • ✔High quality steel, high quality, to ensure that the spring has strong elasticity for a long time. The oval steel wire diameter makes the spring performance better. These processes enable the spring to withstand the cruel working pressure of the racing car..
  • ✔We randomly select some from each batch of production for 23 million anti-fatigue and elastic attenuation tests. All springs performed very well. Other springs without quality assurance. All springs performed well. Other springs are not guaranteed. Not only easy to break, but also damage the engine..
  • ✔12-MONTHS WARRANTY: The spring kit is guaranteed to be used for more than one year. If there is any quality problem within one year, please contact us at any time to replace it with a new one. We have sold more than 200 sets of springs all buyers think it is a great product, many cheap springs are made of poor quality steel that can easily break and destroy the engine after bein....
Check Stock

Cylinder Intake Exhaust Valve Gasket Kit Fits Polaris RZR S 800 EFI (2011-2014)

  • Fits: Polaris RZR S 800 EFI (2011-2014), RZR 800 EFI Eps 2011-2014, RZR 800 EFI (2010).
  • This product is tested to Exceed Original Equipment Standards and Performance.
  • This kit includes: Intake Valves (2), Exhaust Valves (2), Valve Springs (4), Valve Lifters (4), Valve Lock Spring Retainer (8), Cylinder Head Gasket (1).
  • THIS ITEM HAS TO BE INSTALLED BY PROFESSIONAL MECHANICS SPECIALIZED IN ATV AND UTVs, PLEASE ASK FOR MANUAL INSTRUCTIONS IF NEEDED.
Check Stock

COMP Cams K12-600-4 Thumpr 227/241 Hydraulic Flat Cam K-Kit for Chevrolet Small Block

  • High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle..
  • 227/241 Duration at .050". 107 Degree Lobe Separation Angle. 0.479"/0.465" Valve Lift.
  • K Kits vary in their contents, but generally contain a camshaft, a set of lifters, valve springs, retainers, locks, valve seals, timing set, assembly....
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note. Best with aftermarket converters....
Check Stock

OTC 4573 Universal Overhead Valve Spring Compressor

  • OTC's Universal Overhead Valve Spring Compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem....
  • Ideal for use on installed cylinder heads, especially in vehicles with tight underhood clearances, but can be used for bench work as well.
  • Spring loaded jaws easily grip and compress valve springs.
  • Legs designed with a built-in offset to compensate for spring wind - keeping tool vertical and stable during use.
  • fits valve spring retainers up to 1-13/16 inch diameter.
Check Stock

Valve Spring Compressor, Auto Compression Clamp Tool Service Kit for ATV, Car, Motorcycle,Small Engine Vehicle Equipment,Valve Spring Compressor ToolsAutomotive Tool C Clamp Service Set,10 Pcs

  • Valve Spring Compressor C Clamp Tool Set Service Kit includes 5 adaptors to correctly fit, install, and remove automotive valve springs,Suitable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment.
  • All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings.
  • Valve Spring Compressor Small Engine, This toolset is used to easily and safely compress valve springs for removal or installation.The forged steel construction of this set provides superior strength and hardness. The C-Clamp will not bend or twist under the stress of compressing valve springs. The oxide finish on the set components resists rust and corrosion. The surface finish of each part is smooth and provides for easy use under high compression..
  • Valve Spring Compressor Tools -come packaged in a high-impact case that holds each part securely. The parts will remain organized and safe while stored or in transport, and the case stacks and stores away conveniently.1 x Spring Compressor ""C"" Clamp ,5 x Adaptors ,3 x Extension Screws ,1 x Compression Bar ,1 x Storage Case.
  • Solid Valve Spring Compressor Kit to effortlessly reset your valve springs. The Orion Kit comes fully stocked with 5 collets to fit hundreds of makes and models, such as motor....
Check Stock

16 Pack Performance Beehive Valve Springs Kit Compatible with 2002-2017 Cadillac CTS Chevrolet Camaro Corvette SS SSR Trailblazer Pontiac G8 GTO Fit for Engine LS1 LS2 LS3 LS6 LS9 8 Cyl Part# 12499224

  • ✅【VALUABLE CHOICE】 ➤ Durable material to meet or exceed OE standard quality. ➤ Valve spring assembly with superior strength, durability and valve train stability, no matter what the application. Easily handle the increased lift in extreme stress applications. ➤ Durable construction delivers long-lasting valve springs. ➤ Decent price for valve spring kit Set of 16..
  • ✅【FIX VALVE SPRINGS FAILURE SIGNS】Engine misfire, Tapping or ticking noise, Backfire, Compression loss..
  • ✅【SPECIFICIATION VALVE SPRINGS】➤ Beehive-style, Complete Set of 16 ➤ Outside diameter of outer spring: 1.290 in ➤Coil Bind Height 1.220 in ➤ Spring rate: 375 lbs./in ➤ Max lift .550''.
  • ✅【EXCAT MATCH】 Fit for GM Engine: LS1, LS2, LS3, LS6, LS9, 8 Cyl ➤Compatible with Cadillac CTS 2004-2007 5.7L 6.0L ➤Compatible with 2010-2015 Chevrolet Camaro 6.2L ➤Compatible with 2002-2013 Chevrolet Corvette 5.7L/6.0L/6.2L ➤Compatible with 2014-2017 Chevrolet SS 6.2L ➤Compatible with 2005-2006 Chevrolet SSR 6.0L ➤Compatible with 2006-2009 Chevrolet Trailblazer 6.0L ➤Compatible with 2009 Pontiac G8 6.2L ➤Compatible with 2005-2006 Pontiac GTO 6.0L.
  • ✅【OE PART NUMBER】Single spring: 12625033.
Check Stock

COMP Cams 4758-2 Checking Springs

  • Set of two springs is enough for one cylinder.
  • Simplify measuring piston-to-valve clearance, rocker ratio, cam degreeing, etc..
  • Low tension checking springs can be installed by hand in place of valve springs.
Check Stock

Texas Speed TSP Stage 2 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft, Springs, Seals, Gaskets and Pushrods)

  • Texas Speed Stage 2 Low Lift 212/218, .550"/.550" 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). These camshafts have a 3-bolt timing gear pattern. Includes Camshaft, Beehive Springs, Michigan Motorsports Seals, Cam Install Gasket Kit and Chromoly Pushrods.
  • This cam gained 51.4 HP and 22.9 TQ at the flywheel on the in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!.
  • This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market..
  • This is an excellent performance camshaft with a smooth idle! We've had tons of customers select this camshaft when looking for a cam that drives almost stock, and can be hidden with some exhaust systems! If you're looking for a small, stealth camshaft the 212/218 is a great option to consider.. It is ideal for 4.8L and 5.3L trucks that want to keep their factory torque converter and not break the bank on more expensive valve springs and pushrods..
  • These cams are designed specifically for 4.8 5.3 6.0 combinations..
Check Stock