Top Pentair Legend Platinum Bag Reviews

ATIE Platinum Pool Cleaner Tire 370405Z Replacement Compatible with Pentair Kreepy Krauly Platinum Pool Cleaner Tire 370405Z 4 Pack

  • Fits Pentair Kreepy Krauly Platinum pool cleaners LL505PM and LL505PMG.
  • Replace Pentair Kreepy Krauly Platinum pool cleaner tire 370405Z.
Check Stock

Pentair LA01N Single Speed Pressure-Side Pool Cleaner

  • Made from durable, corrosion-proof materials, and provides 50-PSI at 12-GPM.
  • Use with legend platinum, legend platinum truck series, and legend automatic pool cleaners.
  • Measures 16-inch length by 9-1/4-inch width by 10-inch height.
Check Stock

Makhoon Automatic Pool Cleaner Sweep Hose Complete B5 Replacement Compatible with Zodiac Polaris 180 280 360 380 480 Pool Cleaner Sweep Hose Complete B5 B-5 1

  • Scrub and remove algae & debris from pool floor, walls, corners, and steps.
  • CComplete kit includes sweep hose, tail scrubber and hose clamp.
  • Compatible with Zodiac Polaris pool cleaner models 180, 280, 380, 480.Fits Pentair Kreepy Krauly, Legend Ii, Legend 4-Wheel, Legend 3-Wheel Pool And....
  • Note: It is not compatiable with Polaris 360 model pool cleaner.
Check Stock

Polaris Genuine Parts K13 All-Purpose Zipper Replacement Debris Bag, For Automatic Pressure Pool Cleaner Vac-Sweep 280

  • Pokin 360240 Debris Bag fit Perfectly for Pentair Kreepy Krauly ls Racer / Racer LS Pool Cleaners .With hook and loop fastener (NOTE: w/o collar, You can re-use your old collar.).
  • PERFECT FIT：Pentair Racer 360228 and Racer LS 360330 Pool Cleaner . The debris bag kit comes with hook and loop fastener.
  • IMPROVED VELCRO DESIGN：It is made of high-quality nylon mesh bag.Our bag uses velcro closure design instead of zipper closure. Zipper opening would always get stuck with debris and sand. and yet This bag adds a velcro "Pulling Tab" design which makes it much easier to open velcro closure to empty debris.
  • EASY TO USE ：Replacement with this new bag, Remove the existing collar and and old bag from your pool cleaner by pressing the button located on the front of the Racer. The new bag was snapped into the existing collar and then snapped onto the Racer. The velcro strap was wrapped around the Racer hose and closed gently near the hose..
  • THIS AFTERMARKET DEBRIS BAG : After professional design and production, we focus on the owners of swimming pool and spa, and follow our strict quality performance and design standards. Changing the Pentair debris bag will keep your swimming pool clean.
Check Stock

ANTOBLE 360228 Racer Debris Bag - Replacement for Pentair 360240 LS 360330 Kreepy Krauly Racer Pool Vacuum Cleaner

  • Fit Perfectly: ANTOBLE debris bag fits perfectly for Pentair Kreepy Krauly ls racer pool cleaners..
  • The durable nylon mesh pool cleaner bag replaces patrs # 360240 360228 360330..
  • The pentair racer debris bag replacement comes with hook and loop fastener. （NOTE: Collar is NOT included. You can re-use your old collar.）.
  • Velcro Closure Design: Our debris bag uses a velcro closure design instead of zipper. Zipper opening would always get stuck with debris and sand, etc..
  • Easy to Install and Remove: You'll have no difficulty at all installing the brand-new kreepy krauly racer debris bag replacement on your cleaner..
Check Stock

MAKHOON Pool Cleaner Feed Hose Replacement for Zodiac Polaris 280 380 180 3900 Pool Cleaner Feed Hose G5(Not Compatible with Polaris 360)

  • COMPATIBILITY: The G5 is white in color and is engineered to Compatible with Polaris pressure-side pool cleaner(s): 280, 280 Tank Trax, TR28P, 380 and 180. The G5 also works with Polaris 3900 Sport, TR35P, and 280 Black Max And Fits Pentair Legend 4-Wheel, Kreepy Krauly Legend, Legend 3-Wheel pool and spa cleaner models LL105, LL505G, LL505GG with Feed Hose Complete w/ UWF.Note: It is not compatiable with Polaris 360 model pool cleaner.
  • PREMIUM PERFORMANCE: The Makhoon G5 complete feed hose assembly complete with universal wall fitting is a critical component that allows pressurized water to flow to the cleaner so the cleaner can navigate the pool, maintaining maximum cleaner performance..
  • WHAT'S INCLUDED: Feed Hose Complete with UWF(G5), is an exact factory replacement kit that comes pre-assembled and installation ready with 1 back-up valve(G52),1 in-line filter(LS48-080),1 UWF Connector Assembly (9-100-9001), 9 Feed Hose Nuts (D15), 2 Ball Bearing Swivels (D20), 9 Float Heads (D10), and 2 10-foot sections of hose ,one 7.38-foot sections of hose,one 2.66-foot sections of hose,one 0.7-foot sections of hose,giving you 32.8 total feet of hose assembly.(Inclede the leader soft hose).
  • WARRANTY:Purchased Makhoon G5 hose come with a 180-day limited manuf....
Check Stock

Pentair 272422 Valve Top Assembly Replacement Hi-Flow Pool and Spa 2-Inch Valve

  • Part number 272422, valve top assembly replacement.
  • Fits Pentair 2-inch HiFlow valve models 261049, 261050, 261142.
  • Includes handle, valve top, compression spring, o-ring kit bag, diverter, label and hardware.
Check Stock

Swimables Igniter with Gasket Kit Replacement for Pentair MasterTemp/Max-E-Therm Pool and Spa Heater 77707-0054

  • Made To Work With Select Pentair Heater Models: The Igniter with Gasket Kit is compatible with Pentair MasterTemp Heaters and Sta-Rite Max-E-Therm....
  • Identifying the Problem: Open up your Pentair Mastertemp or Starite Maxetherm Heater and locate the Igniter. The igniter can be found via the heater's....
  • Install with Ease: After making sure the Pentair Igniter is damaged, proceed to changing them out. The igniter is held in by two screws. Take off the....
  • Exceptional Quality: These aftermarket replacement parts for the Pentair Heaters are made by Swimables and are of the same or better quality compared....
  • 100% Satisfaction Guarantee: Buy with confidence, as our premium quality Pentair Heater Igniter Replacement is built to last, and if you're not....
Check Stock

190003 Tension Control Clamp Kit Replacement Compatible with Pentair Pool and Spa Filter for Pentair FNS Series Quad DE Series Filter Pumps 23-1/4 Length Black

  • Pentair Tension Control Clamp Kit -- 190003 Tension Control Clamp Kit Compatible with Pentair FNS Plus 48, 60, Pentair CCP series CCP240, CCP320, CCP420, PCC520, Pentair flt quad de 36 24 48 100 60 80, Pentair series 180008, 160340, 160301. (Please refer to your part number or dealer before purchasing to ensure compatibility.）.
  • Pentair Pool Filter -- Fits Clean & Clear Plus pool and spa filter. Also fits for Pentair FNS Plus, Quad pool and spa D.E. filters. Include: Tension Clamp, Washer, Spring Cylinder Nut Assembly. Measures 23-1/4-inch length by 2-1/4-inch height by 22-1/4-inch width..
  • High Quality Materials -- The pentair filter pool clamp made of high quality stainless steel material, can withstand the wind and the sun, prevent leak and premature failure to ensure it can work for a long time. It has been strictly inspected and tested by the manufacturer before leaving the factory,to meet or exceed OEM standards..
  • Solve Problems -- 190003 tension control clamp kit can solve filter clamp starts to get old and the threads will begin to strip, if the clamp breaks the filter tank top will explode off. Replace the filter clamp, you can protect your filter, will not cause you too much loss..
  • Features -- 190003 tension control clamp assembly easy to i....
Check Stock

CMP Pressure Gauge 0-60 PSI for Pentair and Hayward Pool Filter Back Mount

  • 【GREAT REPLACeMENT】190058 Pressure Gauge Replacement for Pool Spa Valve and Filter.Provides Accurate Readings of Filter Pressure Pump from 0 to 60 PSI.Easy to install, Turn off your pump before installation and partially drain the filter.Do not overtighten the Pressure Gauge on the filte..
  • 【PREMIUM QUALITY】Strong Brass Fitting Built for Endurance and Rugged Conditions. Compatible with Pentair Sta-rite 1-1/2-inch multiport valves..
  • 【FITS MODELS】Compatible with Pentair Clean & Clear, Warrior, EasyClean, Triton C-3 pool and spa filter systems,the gauge is not created or sold by Pentair..
  • 【FITS MODELS】Compatible with Pentair Clean & Clear Plus, Predator pool and spa cartridge filters..
  • 【FITS MODELS】Compatible with Pentair EasyClean, FNS Plus, Quad, Warrior pool and spa D.E. filter models FNSP24, FNSP36, FNSP48, FNSP60.
Check Stock

Everlast 80-lb Platinum Heavy Bag, Boxing Gloves, Wrist Wraps, Jump Rope and Heavy Bag Stand Bundle

  • Everlast 80-lb. Platinum Heavy Bag Kit consists of a 80 lb punching bag, heavy bag stand, boxing gloves, hand wraps and jump rope..
  • This Bundle has a Everlast Single-Station Heavy Bag Stand for hanging your 80-lb Platinum Heavy Bag..
  • The webbing of the Everlast Platinum heavy bag makes it really durable and long lasting..
  • The gloves are made from vinyl and designed to provide excellent grip. The hand wraps are made from pure cotton, allowing your skin to breathe and provide your wrists the extra support..
  • There's a jump rope as well, which you would use to warm up before the boxing workout or bout..
Check Stock

ATIE Black 1-1/2 Threaded Pool Filter Drain Plug Winterizing Plug with O-Ring SP1022CBLK 86202000 190030 27001-0022 for Hayward Pentair Sta-Rite Pool Filter Darin Plug 2 Pack

  • Compatible with most Hayward, Pentair, Jandy, Waterway and other brand of pool filters, Ideal winterizing plug for Above-ground and In-ground pools....
  • Replace Hayward SP1022CBLK 1-1/2-Inch MIP Black drain plug. Also compatible with Pentair 190030 drain plug..
  • Fits Pentair Warrior, EasyClean aboveground pool and spa D.E. filters, Also fits Pentair Clean & Clear/Predator, Clean & Clear Plus pool and spa....
  • Fits Pentair Sta-Rite PLM, System 2 and 3 modular media cartridge filter models S7M120, S7M400, S8M150, S8M500, PLM100, PLM125, PLM150, PLM175,....
  • Package included: 2 drain plugs w/ 2 O-rings. Color: Black.
Check Stock

350013 O-318 Trap Cover Lid O-Ring for Pentair VF VS3050 VS-SVRS EQ-Series Pool Variable Speed Pump (1PCS)

  • 350013 O-318 Pentair Pump Lid O-Ring (1 PC).
  • Compatible with Pentair Single Speed pumps: WhisperFlo, Challenger, Pinnacle..
  • Fits Pentair Variable Speed pumps: IntelliFlo, IntelliFlo VSF, IntelliFlo VS+SVRS, IntelliFlo i1, IntelliFlo i2, IntelliFlo 2 VST and IntelliPro VS+SVRS.
  • Compatible with Pentair EQ-Series and WaterFall pump lids.
  • Dimension: 5-7/8"Inside Diameter, 6-3/8"Outside Diameter, 1/4"Thickness.
Check Stock