Top Peltier Water Cooler Reviews

Barisieur Coffee Alarm Clock Coffee Maker- 2 ounces, Black Walnut

  • Powerful: Fast 500W induction boiler with auto shut-off.
  • Peltier Cooler: Milk Fridge with built-in infrared sensor for milk detection.
  • Brewing: Set Barisieur to start brewing 5 mins. before the alarm, on the alarm, or 5, 10, 15 mins. afterwards. Hold 'Make' button for 3 seconds to brew-on-demand.
  • Power-Outage? No Problem: small built-in battery keeps time when power is disconnected..
  • Phone Charging: 5V USB-Port located on the back.
Check Stock

Electric Car Cooler for Vehicle Driver - Soft Cooler Bag Plug in 12v DC,Collapsible,Portable,Soft 25L,36 Cans - Thermoelectric Insulation Bags for Keeping Food Fresh

  • NEW CAR COOLER- Different from traditional ice packs, it is a mini movable fridge that can be connected to the car for cooling foods and drinks, but more lightweight, soft and convenient. A perfect choice for food/ beverage during a long distance travel. NOTE: It is NEITHER a refrigerator, NOR a freezer. it just a car cooler with soft and foldable..
  • NEW COLLAPSIBLE DESIGN- Only 5.5’’ thick after folding, save much space for storage easily! And additional storage pockets at each side help you put sundries during your travel..
  • LARGE CAPACITY- The Cooler bag holds 25 liters (8 gallons) by volume, with a load capacity over 50 pounds, which can hold 36 cans (330ml). It is ideal for camping, hiking, beach BBQs, team building etc..
  • HIGH QUALITY MATERIAL- The exterior coating is made of 600D polyester. The insulation is made of 15 mm polyethylene for great thermal resistance..
  • NOTED: The device you are browsing is a Peltier effect thermoelectric cooler. It is NEITHER a refrigerator, NOR a freezer. 110V AC to DC adapter not included.
Check Stock

Navazip Upgraded Laptop Cooling Pad with Thermoelectric Cooler and 4 Fans, Powerful Laptop Cooler, Independent Control, Multi-Gear Adjustment, RGB, 14-18 Inches Laptop Stand, Black

  • 【 High-strength Thermoelectric Cooler 】 Based on the Peltier effect and other principles, the development of Thermoelectric Cooler with a close-fitting heat conduction sheet, achieves the effect of cooling in 3 seconds!.
  • 【 Silent and Powerful Fans 】 11-blade Imitation aviation ultra-thin silent fan blade, with brushless motor, the noise is less than 20 decibels, and the heat dissipation is quieter. The fans have a maximum RPM of 2800 R/min, and the full coverage of the fuselage allows for greater air circulation..
  • 【 RGB Ambient Lighting + LCD Display 】 Unique surround RGB lighting. This notebook cooler has LED dazzling lights, with multiple RGB colors and 10 lighting effect modes. The LCD screen allows you to operate more conveniently..
  • 【 6 Level Height Adjustable + Stable Base 】 6 Level height adjustable, enjoy a comfortable angle. The product has a non-slip buckle so that the base is stable and does not shake!.
  • 【 Wide Compatibility 】 The first dual-system fast cooling to meet the cooling needs of all notebooks. The large cooling area can meet the needs of most....
Check Stock

4Pcs Aluminum Heat Sink 40 x 40 x 20mm /1.57 x 1.57 x 0.79 inch Peltier Heat Sinks Cooling 11 Fin Black

  • Includes 4 pieces black anodized aluminum heatsink.
  • Can be applied for passive cooling of 3D printers, NEMA 17, TEC1-12706, TEC1-12710 Thermoelectric Peltier Cooler etc.
  • Dimension: 1.57 x 1.57 x 0.78 inch / 40 x 40 x 20 mm (L*W*H).
Check Stock

Kowela Electric Dehumidifier 1500ml 2200 Cubic Feet 250 sq ft Portable and Compact Quiet Dehumidifiers with Auto Shut Off for Home Bathroom Bedroom Basement Wardrobe RV

  • ★HIGH-EFFICIENCY - Adopts semiconductor Thermo-electric Peltier technology,extracts up to 18 ounces of moisture per day with a 52 ounces water tank....
  • ★AUTO SHUT OFF : Using Thermo-electric Peltier technology, the dehumidifier ensures maximum water extraction with minimum power use.Automatically....
  • ★COMPACT & LIGHTWEIGHT - Mid size, takes up little space, perfectly controls moisture and condensation. Perfect for bathroom, bedroom, RV, grow....
  • ★SUPER QUIET DESIGN - No compressor,whisper quiet operation in bedrooms, bathrooms and offices. Enjoy the silent and smooth activity and dehumidify....
  • ★HEALTHY LIFESTYLE - The dehumidifier cost effective way to combat moisture, unpleasant smells and condensation.Kowela dehumidifier is helpful from....
Check Stock

SakuraClub Semi-Conductor Phone Cooler Cellphone Radiator with Dual Cooling Chip Cooling Case for iOS/Android Phones Fit for Mobile Gaming Video Streaming Car Driving Need to Be Plugged in

  • 【NEED A CHARGER FOR PHONE GRIP: 5V(MUST), 2A OR ABOVE WHILE WORKING】Charger not included. Please purchase a charger or use your phone's charger.....
  • 【COMPATIBLE DEVICES】Compatible with iPhone and Android Phones (With height between 4.9-6.3 inch and thickness less than 10mm),Phone Case was not....
  • 【COOL DOWN YOUR PHONE AND KEEP IT RUNNING AT PEAK PERFORMANCE】The phone Cooler Grip equipped with Peltier Thermoelectric Cooler inspired by....
  • 【BETTER MOBILE GAMING EXPERINCE WITH MOBILE TRIGGER】Plug and Play, Highly Responsive, Physical Button Feedback. Dominate the game with 4 fingers....
  • 【PACKAGE CONTENTS】1 Pair IFYOO Z108 Mobile Game Controller, 1x IFYOO MPCG Active Cooling Fan Phone Radiator Grip, 1x Approx. 1M Type-C USB....
Check Stock

Peltier Cooler Semiconductor Refrigeration Cooling System DIY Kit 12V 6A Thermoelectric Peltier for Mini Air Conditioner

  • ADVANCED TECHNOLOGY-- Semiconductor coolers are a form of solid state cooling. The thermoelectric peltier adopts semiconductor technologies and electronic assembly techniques..
  • FEATURE-- Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc..
  • WIDE APPLICATION-- This thermoelectric cooler can be widely used for small space cooling, air cooling dehumidification, semiconductor refrigeration learning theory and more..
  • EASY INSTALLATION-- The semiconductor refrigeration has compact size and simple construction for easy installation, convenient to use..
  • GOOD COOLING EFFECT-- It has low noise, and can cool down quickly, ideal for small area cooling..
Check Stock

Easycargo 10pcs 40mm Thermal Conductive Pad for Interface of heatsink with nema 17 TEC1-12706 Thermoelectric Peltier Cooler40x40x0.5mm (10pcs Pack)

  • 10 pieces 40mm Thermal Conductive silicone pad..
  • Size: 1.57×1.57×0.02″ (40x40x0.5mm)..
  • Can be applied for thermal interface of 40mm heat sink with stepper motors of 3D printers, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc.
Check Stock

Ivation Portable Electric Cooler Bag | 15L Soft Sided Thermoelectric Travel Cooler with Shoulder Strap, Storage Pocket & DC 12V Plug in for Car, Truck & RV Camping

  • ..., Bottles, Food & Other Perishables for Icy Enjoyment Anywhere | Includes Cooler Pack/Lunchbox & DC Adapter for Plugging Into Vehicle with 12V Outlet Including Cars, Trucks, RVs & Boats.
  • ICELESS THERMOELECTRIC TECHNOLOGY | NEW Ultra-Efficient, Long-Lasting Peltier Cooling System Requires No Liquid Refrigerant for Operation! Simply Plug In to Safely & Effectively Cools Contents’ Temperature 15 degrees below the ambient temperature | Brushless Fan Motor is Quiet & Requires Minimal Energy for Eco-Friendly, Freon-Free Performance.
  • DURABLE SOFT-SIDED CONSTRUCTION | Heavy-Duty Exterior Coating is Made of Soft Yet Sturdy Polyester, While Thick, High-Quality Insulation Boosts Thermal Resistance for Keeping Hot/Cold When Unplugged | Tote Handles a Hefty 20+ Can Load Capacity, is Lightweight for Travel & Features Flexible Folding Walls that Collapse for Convenient Storage.
  • CARRY HANDLES & COMPARTMENTS | Built-In Extras Make Packing a Breeze Including Discreet Cord Storage & a Generous Front Pocket with Zipper Closure for Stowing Utensils, Napkins, Bottle Openers, Keys & Other Personal Items ....
Check Stock

Mobile Game Controller + Active Cooling Fan Phone Radiator Grip, Compatible with iPhone / Android Phone, For PUBGG / Fortnitee / Call of Duty Mobile Games(CODM), Cooler Gaming Case Triggers L1R1 Buttons

  • ... was not recoomended when using the Cooler Fan Grip. 【SUPPORTED GAMES】Mobile Trigger works with PUBGG Mobile, Fortnitee Mobile, Call of Duty Mobile(COD), Roblox, etc..
  • 【COOL DOWN YOUR PHONE AND KEEP IT RUNNING AT PEAK PERFORMANCE】The phone Cooler Grip equipped with Peltier Thermoelectric Cooler inspired by refrigerator and a 7000 RPH turbo fan, it quickly drops the temperature down. Mobile Gaming produce a high amount of heat, which brings side effects like lag. With Phone Cooler, Your phone can always running at highest speed and extend its battery Life..
  • 【BETTER MOBILE GAMING EXPERINCE WITH MOBILE TRIGGER】Plug and Play, Highly Responsive, Physical Button Feedback. Dominate the game with 4 fingers by using our mobile game controller. Compared with similar products, Our excellent design that provides long-lasting elasticity and protects the screen. Anti-misoperation Design For Mobile Phone's Side Buttons, Lowest Screen Occupancy, More Excellent Performance and More Durable Material..
  • 【PACKAGE CONTENTS】1 Pair IFYOO Z108 Mobile Game Controller, 1x IFYOO MPCG Active Cooling Fan Phone Radiator Grip, 1x Appr....
Check Stock

Easycargo 40mm Heatsink Kit 40x40x11mm + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Heat Sink for Cooling 3D Printer, TEC1-12706 Thermoelectric Peltier 40mmx40mmx11mm (Black, 4)

  • Pre-applied 3M 8810 thermal conductive double side adhesive tape backing.
  • Can be applied for passive cooling of 3D printers stepper motor, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc..
  • Dimension: 1.57 x 1.57 x 0.43 inch / 40x40x11mm (L*W*H).
Check Stock

Easycargo 4pcs 40mm Heatsink 40mmx40mmx20mm Aluminum Heatsink Kit Cooling Heat Sink for 3D Printer Stepper Motor NEMA 17 TEC1-12706 Peltier Thermoelectric Cooler Module LED 40x40x20mm Silvertone

  • Includes 4 pieces 40mm aluminum heatsink..
  • Dimension: 1.57"x1.57"x0.79" / 40x40x20mm.
  • Can be applied for passive cooling 3D printer stepper motor, TEC1-12706 Thermoelectric module, NEMA17, LED etc.
  • 3D printer stepper motor, TEC1-12706 Peltier Thermoelectric Cooler Module Not Included..
Check Stock

Easycargo 40mm Heatsink Kit 40mmx40mmx20mm + 3M8810 Thermal Conductive Adhesive Tape, Cooler Aluminium Heat Sink for Cooling 3D Printers Stepper Motor TEC1-12706 Thermoelectric Peltier Cooler 40x40x20

  • Pre-applied 3M 8810 thermal conductive double side adhesive tape backing.
  • Can be applied for passive cooling of 3D printers stepper motor, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc..
  • Dimension: 1.57 x 1.57 x 0.43 inch / 40x40x20mm (L*W*H).
Check Stock