Top Pe x Pipe Reviews

Gas Flex 3/4 GAS Tubing Pipe KIT 33 Ft with 2 Fittings GasFlex Natural GAS Propane

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • 3/4" Nominal Pipe size: 16mm ID x 20mm OD (0.625" ID x 0.787" OD).
  • CAPACITY: 220,000 BTUH FOR LPG APPLIANCES : 200,000 BTUH FOR NATURAL GAS APPLIANCES.
  • KIT arrives with the brass connectors hand tightened for ease of installation.
  • Comes with 2 fittings , the fittings are MALE NPT 3/4" both ends.
Check Stock

Gas Flex 3/4 GAS Tubing Pipe KIT 66 Ft with 2 Fittings GasFlex Natural GAS or Propane

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • Comes with 2 fittings , the fittings are MALE 3/4" NPT thread.
  • CAPACITY: 150,000 BTUH LPG APPLIANCES, 140,000 BTUH FOR NATURAL GAS APPLIANCES.
  • KIT arrives with the brass connectors hand tightened for ease of installation.
  • 3/4" Nominal Pipe size: 16mm ID x 20mm OD (0.625" ID x 0.787" OD).
Check Stock

Amazon Basics Ratcheting Plastic Pipe Cutter - 1/8-inch to 1-5/8-inch

  • Pipe-cutting tool for cutting plastic pipes and tubes ranging from 1/8 inch to 1-5/8 inches in diameter.
  • lightweight yet sturdy aluminum handle and a sharp stainless steel blade.
  • Suitable for multilayer tubing and most types of plastic, including PVC, CPVC, PP, PEX, PE, and rubber hose.
  • Ratchet drive mechanism ensures energy-efficient cutting.
  • Locking hook on the end of the handle for locking the tool securely closed when not in use.
  • Product dimensions: 8.9 x 4.4 x 1.1 inches (LxWxH).
Check Stock

SharkBite U701 PEX Tubing Cutter, For 1/4 Inch, 3/8 Inch, 1/2 Inch, 3/4 Inch, and 1 Inch Pipes

  • CUTS IN SECONDS: Place your PEX or PE-RT pipe in the pex into this pipe cutter and squeeze.
  • VERSATILITY: For clean, straight cuts, use with 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch and 1 inch SharkBite PEX tubing or PE-RT Pipe.
  • QUALITY: SharkBite's quality and performance is field-proven and is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • PERFORMANCE: Use this PEX tool to create a clean cut for your SharkBite fittings.
  • PREFERRED BY THE PRO: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock

TIPU 1-3/8

  • Ideal for reaming inside and outside diameters of plastic pipe , polycarbonate tubing, PVC pipe, PE pipe, PPR pipe.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

1 Inch CTS Yellow Medium-Density Poly Pipe Line for Gas Distribution PE2708 100 Feet

  • Yellow Medium-Density poly pipe for natural gas or liquid propan distribution. Bimodel MDPE (PE2708).
  • Min. Wall Thicknes: 0.090 (100 Foot Length).
  • Outstanding strength and durability providing longer pipeline service and enhanced pipeline integrity..
  • Provides outstanding resistance to slow crack growth (SCG) and rapid crack propagation (RCP) which provides for a safer gas distribution system..
  • IMPORTANT NOTE: There are various pipe sizes described as 1". This for CTS pipe not IPS pipe. These are different pipe sizing standards with different....
Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

  • APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
  • ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
  • HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
  • -30 degree to 100 degree F temperature range..
  • BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
  • Size: 16mm or 5/8″ Barb x 3/4″ G Male.
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock

Sharkbite 24632LF 45° Hose Bibb 1/2" x 3/4" Multi Turn

  • INSTALLS IN SECONDS: 1/2 inch x 3/4 inch threaded hose bibb valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
  • COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • ...10V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manual.
Check Stock

Libraton PVC Pipe Cutter 2-1/2\

  • IMPROVED BLADE: The Libraton PVC pipe cutter blade is of SK5 material, and an improved hardness process can ensure its longer service life..
  • CUTTING RANGE: The PVC cutter is of large cutting range, up to 2-1/2-inch (63mm) outer diameter..
  • WIDE APPLICATION: The ratchet PVC cutter can be also applied to cut different plastics pipes and tubes (PVC, PEX, CPVC, PP-R, PE, Rubber Hose, etc.). It is not recommended for cutting THIN PVC pipe..
  • RATCHET DESIGN: The plastic pipe cutter is designed with a ratcheting driver so that you can do the pipe cutting job with one hand easily. OUR TEST SHOWS THAT ONE CUT WITHIN 5 TO 20 SECONDS ONLY..
  • AFTER-SALES SERVICE: We offer a 12-month warranty on this PVC pipe cutter. And our after-sales service team promise to reply to your ANY question WITHIN 24H to help you solve ANY problem with the PVC cutter..
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • ...r Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe....
Check Stock

PVC Cutter 2-1/2\

  • 【Wide range of applications】: The ratchet cutter is designed up to 2-1/2-inch (63mm) outer diameter,cutting knife is very suitable for all kinds of plastic pipes(PVC, CPVC, PP-R, PEX, PE, etc),Great helper for home handy man, plumbers, electricians, and vehicle mechanics..
  • 【Heavy duty】: The tubing cutter blade itself is made of SK5 material with high strength and hardness. The surface is covered with Teflon coating,high hardness,smooth, sharp,Cutting quickly..
  • 【Ratchet design】: The pipe cutting machine adopts ratchet drive technology, cutting pipe with less effort and improving work efficiency. Pressing the self-locking during use can prevent the cutter from springing back, cutting the pipe faster, saving energy and safety.and the triangular convex point design at the blade can better cut the pipe..
  • 【Ergonomic design】: The bottom handle adopts ergonomic grip to protect the hand, which can make single stroke cutting quickly and easily, Suitable for long hours..
  • 【Safe and convenient for you】: Put the pipe to be cut into the corresponding knife edge, and continuously clamp and tighten the handle to easily cut the pipe. After use, just fasten the safety lock at the bottom, and the pipe cutting machine will become small and easy to carry o....
Check Stock