Top Pci To Ide Card Reviews

Ciglow Hard Disk Enclosure,mSATA SSD to 2.5-Inch 44-Pin IDE Adapter with Shell,Stable Performance,Laptop PATA/IDE Hard Drive Shell Adapter (Black)

APPLICABILITY: This product only supports mSATA SSD from 3x5cm or 3x7cm to 2.5-inch PATA/IDE..
ACCURATE TRANSMISSION: mSATA SSD to 2.5-inch PATA/IDE interface. It perfectly supports the SATA3 transmission standard. The adapter card only changes the interface form of the solid state drive, and does not change any performance of your hard disk. What is your original hard disk parameter, and the adapter card is added, the output interface performance will not change..
HEAT DISSIPATION FUNCTION: The original intention of MSATA design is to be used in a confined environment. It must be resistant to high temperature, so there is no need to worry about this problem. Moreover, the space in the adapter box is large enough, and the air convection problem is considered when designing, so there is no worry about heat dissipation. necessary!.
STABLE PERFORMANCE: 100% brand new and high quality. The performance of this product is stable. Only support MSATA defined SSD in MINI PCIE interface..
CONVENIENT AND PRACTICAL: Mini PCI-e mSATA SSD to IDE 2.5-inch 44pin adapter..

Check Stock

CY Low Profile 4 Ports PCI-E to USB 3.0 HUB PCI Express Expansion Card Adapter 5Gbps for Motherboard

4 Ports PCI-E to USB 3.0 HUB PCI Express Expansion Card Adapter 5Gbps for Motherboard.
With 9.5mm Length low profile bracket and standard bracket. Interface: Interface: Single-Lane (x1) PCI Express Gen2 Mode.
You need to install the NEC USB3.0 driver for your computer first.Compatible: USB1.1/2.0/3.0.
Operating Systems: Windows7/8/10(32/64bit) ..
Speed: Data Transfer rate of 1.5/12/480/5000 Mbps.Low Speed (1.5Mbps), Full Speed (12Mbps), High Speed (480Mbps), Super Speed (5Gpbs).
Power Input: SATA or IDE Power Connector.

Check Stock

Asus M4N68T-M V2 Socket AM3/ GeForce 7025/ DDR3/ A&V&GbE/ Micro ATX Motherboards

4x SATA2 Ports, Support RAID 0, 1, 5, 10, JBOD.
Chipset: nVidia GeForce 7025/ nForce 630a.
CPU: Socket AM3 Support AMD Phenom II/ Athlon II/ Sempron 100 Series Processors.
Memory: 2x 240pin DDR3-1800(O.C.)/1600(O.C.)/1333/1066 DIMMs, Dual Channel, ECC/Non-ECC Un-buffered, Max Capacity upto 16GB.

Check Stock

LGA 775 Motherboard Integrated 6 Channels DDR3 1066/1333MHz for G41 Chipset Desktop Computer 3 in 1 Function of Integrated Graphics Sound Card and Network Card

【LGA 775 DDR3 Motherboard】Professional designed DDR3 motherboard possess dual channel, 2 x DDR3 DIMM, CPU socket LGA 775, Main Chipset For G41,is....
【Integrated G41 Desktop Motherboard】The LGA775 motherboard possess the function of integrated graphics, sound card and network card, Integrated 6....
【Multi Practical Port】Support IDE port, Expansion Slot: 1 x PCI-Ex16 graphics card slot, 1 x PCI slot, 2 x USB2.0 slot, 4 x SATA2.0 interface, 1 x....
【Easy to Install】Made of high-quality materials, come with high performance and stable performance,small in size, easy to install, no other....
【100% Satisfaction Guarantee】This LGA775 Motherboard has a complete after-sales service, If you have any questions about the product or you are....

Check Stock

ASHATA PCIE SATA Card,PCI-E to SATA3.0 Controller Expansion Board 8-Port SATA3.0 Interface Expansion Card,PCI-E SATA Adapter Card Fit for Windows 7/8/XP/10

【PCI-E to SATA 3.0 Card】Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching and hot plug..
【Compatible with SATA6G/3G /1.5G Hard Drives.】Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps.
supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i..
【Wide Compatibility】Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
PCI-Express v2.0 compliant, backward compatible with PCI-Express v1.0..
【Note】PCI-E must have a slot above V2.0, V1.0 will not exceed 250M, PCI-E can be X1 or X16 as long as it is V2.0 version, there is spare X16 slot directly into X16 slot on..
【Tips】User with SATA3.0 data cable for best results.Any questions,Please feel free contact us,we will provide you with high quality after-sales service..

Check Stock

SD to IDE Adapter Small Memory Card to IDE Small Memory / TF Card to IDE 44Pin Male Adapter

COMPLIANCE WITH STANDARDS£ºSD to IDE adapter is compliance with standards: Memory card specification Ver2.0, IDE/ATA?33 specification. Products that meet the specifications are very suitable for your use..
STANDARD IDE INTERFACE£º44Pin male adapter hard disk adapter adopts standard IDE interface, true IDE mode, and supports DMA-33 transmission mode. The IDE interface is a 44-pin/2.0 mm male connector. This product is convenient for you to use..
TWO MAIN CONTROL CHIPS£ºThere are two main control chips on this board, and there is a memory card socket on the back. Advantages: small footprint, compact design and simple operation..
SYSTEM SUPPORTABLE£ºThe memory card can be included with the OS and application software, and the device can be directly activated.
Supporting DMA and ULTRA DMA mode for DOS / NT4 / WINDOWS98SE / ME / 2000 / XP / VISTA / OSX / Linux systems..
SPECIALLY DESIGNED£ºSmall memory card to IDE memory card has the characteristics of small size, large capacity, shock and moisture resistance, high temperature resistance, stable ....

Check Stock

StarTech.com 3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader 35BAYCF2IDE

Connect a CF card to a computer through an IDE connector.
Compatible with compact flash memory cards and desktop computers with an IDE slot.
Compact flash IDE adapter / CF to IDE adapter / CF to IDE converter / IDE to CF card reader.
Quick and driver free installation into any IDE 40 pin and 44 pin slot.

Check Stock

Optimal Shop 20+4 Pin LCD Computer Power Supply Tester for SATA IDE HDD ATX ITX BYI Connectors-Black

8-in-1 ATX power supply tester: Support testing 20-pin IDE/24-pin IDE/HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector..
Aluminum alloy shell: light and easy to carry, high strength, good thermal conductivity and corrosion resistance..
1.8″ LCD screen: The output voltage is displayed on the 1.8″ LCD screen, which is easy to read (1.8″ LCD screen is powered by the 20-pin/24-pin connector). Note: Is there a scratch on the product screen? Because the screen is easy to scratch, we put a protective film on it, if you think it is not beautiful, you can tear it off by yourself..
Buzzer alarm: When your power supply PG number fails, the power tester will emit a buzzer alarm, which is easy to know..
When testing with HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector, the indicator on the left shows the output voltage (+12V + 3.3V + 5V)..

Check Stock

WSDMAVIS 1 Pcs SD Card to IDE Adapter 2.5 Inch 44Pin Male Adapter SD SDHC SDXC MMC Memory Card Converter to Laptop HDD

Use this product to convert SD card into 2.5inch 44pin IDE interface.There are two main control chips on this board, and there is an SD card socket on the back..
Compliance with SD specification Ver2.0, IDE/ATA-33 specification.Standard IDE interface interface: true-IDE mode, and supports DMA-33 transfer mode.
The IDE interface is a 44-pin/2.0mm male connector..
The SD card can become an OS and application software that can directly start the device.
Support DMA and ULTRA DMA mode, suitable for DOS, NT4, WINDOWS98SE, ME, 2000, XP, VISTA, MAC, Linux systems..
Installation method:First install the SD card into the product slot, and then connect the hard drive data cable to the interface of the notebook hard drive. It can be operated and used after the power-on test is normal..
Note: for soft routing, the size of the SD card should be within 1G. For example, if WIN98, WIN ME, WINXP, and the system are installed, the SD card capacity should be more than 2GB. If you require high speed, please choose a high-multiplier flash memory card.Maximum support 128G SD card..

Check Stock

Supermicro X7DA8 Intel 5000X Greencreek Extended ATX DDR2 ECC FB-DIMM Dual 771-pin LGA Sockets Motherboard

CPU: Dual 771-pin LGA Sockets Supports Intel 64-bit Dual-Core Xeon Processor 5000X sequence upto 3.73GHz.
Chipset: Intel 5000X (GreenCreek) chipset & MCH + PXH-V + ESB2.
Memory: 8x 240pin DDR2-667/533 DIMMs, Dual Branch Memory Bus, ECC/FB-DIMM, Upto 32GB.

Check Stock

SinLoon SCA 80 Pin to 68 50 Pin SCSI Adapter SCSI 68 Female Adapter SCSI 80 Male Adapter for Data Transfer (50/68/80)

Product Name: SCSI three card 68-80-50 ide SCSI hard disk adapter 68 Pin Female to 80 Pin Male to 50 pin IDE (SCSI 80 pin, 68 pin, 50 pin adapter).
SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 50 pin interface to 68 pin interface. In this way, 50 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
SCSI Three Turn Card. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
Note: It's a 50 pin IDE,Only available on industrial server IDE 50-pin motherboards. not a 40 pin or 44 pin ide of an ordinary computer. It can't be used on an ordinary computer. Please pay attention!.

Check Stock

AITIAO 2Pcs SD Card to 2.5 Inch IDE Adapter SD SDHC SDXC MMC Memory Card Converter TF Memory Card to IDE 44Pin Male Adapter to Laptop HDD for DOS/Linux/Windows 98SE, Me, 2000, XP and for Vista.

The SD Card to 2.5 Inch IDE Adapter Adapt SD/MMC flash memory card to a super compact, SD card has the characteristics of small size, large capacity, anti-seismic and moisture-proof, high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error..
Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 2.5" hard disk.Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification.One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket..
IDE Adapter supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions: 36mm x 52mm..
Attention: This SD Card to 2.5 Inch IDE Adapter does not support hot-swap of CF cards, so please turn off power when changing cards..

Check Stock

945 Micro ATX Gaming Motherboards,Computer Motherboards Gaming DDR2 PCIE16 Slot SATA IDE Interface,Build in Network Card Sound Card

Micro ATX Architecture: The Motherboards size is 220 x 170mm M ATX Architecture, All solid State panels, good materials are preferred for long‑term durability..
Multi Phase Power Supply: The power supply has 24 pin and 4 pin interface, which is stable,accurate and evenly distributed, and the heat load of various power supply chipsets improves the performance of the CPU..
Various Expansion Interfaces: This computer motherboards support VGA , PCI and COM interface, DDR2 RAM, SATA/ IDE Interface..
Solid State Capacitors: Solid‑state capacitors have stable performance and greatly extend the life of the motherboard..
Built In PCI: This micro atx gaming motherboard has PCI‑E 16 slot, PCI slot is an expansion slot based on PCI local bus..

Check Stock