Top Pcb Screws Reviews

GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB

  • Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool.
  • Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place..
  • The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB..
  • PCB has RGB presoldered,it's under per switch.PCB RGB can support by music..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again..
Check Stock

Hao Pro Plug-in Screw Terminals Block Connector Pitch Good Solder Connect Tight Easy Insert Wire Reduce Confuse Handy for Panel PCB Breadboard Mount AC 150V 6A Green, 2.54mm-Green-2Pins-15Pc

  • Pin Number : 2 Pin Distance : 5.08mm/0.2"..
  • These PCB screws are snap together well.have a quick release capability.Just need to loosen the screws to land the wires.Use high-quality plastic PA66 high temperature resistant V0 flame retardant,steel screw environmentally friendly electroplating,no slippage.Widely used in electronics,communication equipment,instruments.
  • Package Content: 20 Set x PCB Terminal Block Connector.
Check Stock

YMDK GK61x GK61xs GK64x GK64xs Anodized Aluminum CNC Case (Only Aluminum Case)

  • Package Included: CNC Case + Rubber Feet + Screws.
  • New GK61x GK61xs GK64x GK64xs plate and PCB can install in directly..
  • Old GK61 GK64 plate can't use since the size is bigger than normal 60 case.You can just replace a GH60 size customized plate is ok.The plate need to be compatible with GK61 PCB..
  • How to judge old and new edition: Old GK61 GK64 PCB is white and only support single 6.25u space New GK61x GK61xs GK64x GK64xs PCB is black and can support split space and single space at the same time..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.If little keys not working,check the switch pin whether it's bent at first.Especially Kailh switches.
Check Stock

Gateron V2 Clear Stabilizers PCB Mount Screw in Stabilizer Customized Distance No Dropping Wire for Mx Mechanical Keyboard PCB (Gateron Stab V2 Clear 1+4)

  • This is Gateron PCB Mount Screw In Crystal Stabilizer，.
  • Package Included：1x6.25u +1x7u +4x2u PCB Mount Screw-in Stabilizers + pad + Screws For 60% 68 75 84 87 Keyboard.
  • The plastic inserts and boat only has 10 pcs each. There is extra wire presented, but no plastic insert boat presented.
  • If your keyboard is 96 or 104 108 layout,need to buy 2 set.
  • This stabilizers are PCB screw-in stabilizers which is directly mounted on PCB.V2 stabilizers is designed to prevent the wire from dropping off.It's more stable than old edition..
Check Stock

Diamond 60% CNC Anodized Aluminium case Acrylic Case for 60% 64 Mechanical Keyboard for GH60 Bluetooth Gk61 GK64 DZ60 YD60MQ

  • Package Included:Purple CNC Case + Screws + Brass Bolt + Rubber Feet.
  • Both GK61 GK64 wired and Bluetooth edition is compatible with this case Plate.
  • For GK61 GK64 original plastic keyboard,if you want to replace with this case,please order case plate kit together,original plate is bigger than normal size CNC case.
  • For GK61 GK64 PCB,pls use brass bolt and M2-6 screws,For Normal GH60 PCB,just use M2-5 screwed to the case directly.
Check Stock

Circuit Board Holder with Adjustable Heavy Duty Base Large Soldering Helping Hand Vise 360° Rotated For Clamping PCB solder DIY Printed Circuit Board Stand NEWACALOX

  • Non-slip PCB clips: The PCB clips on the holder is easy flips printed circuit boards 360°, use better elasticity springs to avoid slipping, easily....
  • Sturdy construction and easily adjusted. The Soldering helping hand holder is made of aluminum alloy and has 3 screws to tighten and fix, heavy and....
  • Equipped with 4 rubber feet under the base ensure stability, so the holder will not slide around on the bench. keeping safe. the base is solid and....
  • Adjustable PCB holder frame: The rolling bearing makes the bracket move more smoothly without jamming, the ability to rotate is great for switching....
  • Easy to Install and easy to use: It is very convenient to insert the pcb board and easy to remove. You could make any position adjustment you want by....
Check Stock

Electronics-Salon 4X Solderable Breadboard Proto Board PCB DIY Kit for Raspberry Pi 2/3 Model A B A+ B+ Zero

  • The proto breadboard PCB suitable for any type Raspberry Pi GPIO, or other electronic projects DIY..
  • PCB Material: high quality FR-4 glass fiber PCB. Dimensions: 62mm x 88mm / 2.44" x 3.46", Thickness: 1.6mm / 0.063".
  • Top to bottom layer all solder pad holes are plated through, pads grid (pitch) 2.54mm / 0.1", hole diameter 1.2mm / 0.047"..
  • Package included 4x PCBs, 4x 2x20pin pitch 0.1" male headers, 16x M3x10mm nylon standoffs and 16x M3x6mm nylon screws..
Check Stock

C3 Equalz Stabilizer C3 Equalz Manufacture PCB Screw-in Stabilizers Lumia Customized Mechanical Keyboard for 80% 60% Mechanical Keyboard Stabs

  • Equalz manufacture gold Plated PCB Mount Screw-in Stabilizers.
  • Optimize the steel wire groove, the wrapping is stronger, and the steel wire is not easy to drop..
  • Full POM material, internal mirror effect, less friction..
  • 12.9 Phillips black-plated nickel-plated screws, red steel paper insulating gaskets, stabilizer buffer PCB protective stickers..
  • The insert is pre-clipped, and no post-processing is required to cut the feet manually..
Check Stock

ARCELI Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY Soldered

  • PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
  • Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
  • Note: This is not original Arduino product.it only a substitute accessories from ARCELI.
Check Stock

EQUALZ C3 x The Key Company Screw-in Stabilizers V3 | White Housing, White Stems, Silver Wire | PCB-Mounted Stabs for TKL Custom Keyboard | DIY Mechanical Keyboard Stabilizer

  • DIY KEYBOARD MUST-HAVE: C3 Equalz x The Key Company V3 Screw-in Stabilizer Set comes with 5 pairs of white housing, 5 pairs of white stems, 6 silver wires, 10 screws, 10 washers, and stickers for sound dampening..
  • PCB-MOUNTED: Mount our screw-in stabilizers directly into your keyboard PCB with the included screws. This is the most stable mounting style because it is the most secure and offers less vibration..
  • CUSTOM KEYBOARD KIT: Keys that are larger than 2u require stabs. On a typical tenkeyless or TKL mechanical keyboard, you’ll need one for your spacebar, enter, backspace, and shift keys..
  • WOBBLE-FREE KEYS: Our stabs are designed to stabilize and prevent larger keys from rattling. You can follow our detailed step-by-step assembly to help guide you on how to put in your screw-in stabilizers..
  • PERFECT PAIRING: Our new SoulMate stab films kit is included in every V3 keyboard stabilizer kit. It's the perfect pairing for your stabs, letting you tune to the sound profile you're looking for..
Check Stock

EQUALZ C3 x The Key Company Screw-in Stabilizers V3 | Grey Housing, Grey Stems, Silver Wire | PCB-Mounted Stabs for TKL Custom Keyboard | DIY Mechanical Keyboard Stabilizer

  • DIY KEYBOARD MUST-HAVE: C3 Equalz x The Key Company V3 Screw-in Stabilizer Set comes with 5 pairs of grey housing, 5 pairs of grey stems, 6 silver wires, 10 screws, 10 washers, and stickers for sound dampening..
  • PCB-MOUNTED: Mount our screw-in stabilizers directly into your keyboard PCB with the included screws. This is the most stable mounting style because it is the most secure and offers less vibration..
  • CUSTOM KEYBOARD KIT: Keys that are larger than 2u require stabs. On a typical tenkeyless or TKL mechanical keyboard, you’ll need one for your spacebar, enter, backspace, and shift keys..
  • WOBBLE-FREE KEYS: Our stabs are designed to stabilize and prevent larger keys from rattling. You can follow our detailed step-by-step assembly to help guide you on how to put in your screw-in stabilizers..
  • PERFECT PAIRING: Our new SoulMate stab films kit is included in every V3 keyboard stabilizer kit. It's the perfect pairing for your stabs, letting you tune to the sound profile you're looking for..
Check Stock

Soldering Station Helping Hands with Magnifying Glass Third Hand Solder Tool PCB Holder - Heavy Duty Base Plate | Four Flexible Arms

  • ... station is equipped with a 3x magnifying glass, whick can help you magnify small electronic components, third hand tool can improve your work efficiency and welding accuracy, and you no longer have to be tired of small parts..
  • 【Will Not Scratch The PCB Board】 The alligator clips on pcb holder arm are fixed with screws and can be rotated 360 degrees, and each clip is equipped with an insulating rubber sleeve, which can prevent scratching the circuit of the PCB board and prevent electrical short circuits..
  • 【Customer Satisfaction】Our service tenet is to make you 100% satisfied with our products. If the product does not meet your expectations, please feel free to send us a message via “Contact Seller”, we will handle it for you.
Check Stock

Anihoslen Lumatek 400w Watt High Par HPS Lamp - high Pressure Sodium Flower Bloom Supplier_id_thehydrosource UGEIO42120974045896

  • INJECT SOUL INTO YOUR BOAT ➤180° Wide Angle, 3000LM 10-36V, 84LED 2835 Chip. Selected lamp beads, IC, PCB board, higher efficiency and longer life.....
  • UPGRADED IP68+ WATERPROOF ➤ 30M water depth aging without any leakage. The latest triple waterproof design: PCB waterproof coating, high temperature....
  • BEST MARINE MATERIALS ➤ 316 stainless steel, which is ten times more expensive than 304, is specially designed for highly corrosive salt water. Cool....
  • SUPER EASY INSTALLATION ➤ Two wires and a few screws are suitable for any scene with the surface mounting method. Adding a layer of waterproof glue....
  • KEEP YOUR MONEY SAFE ➤ Any leaks or burns are guaranteed for life. Full refund for quality problems within 1 month, free replacement for quality....
Check Stock