Top Pcb Scraps Reviews

uxcell PCB Drill Bits 0.5mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 2 Set (20 Pcs)

  • HIGH QUALITY -- Using high quality materials and fine grinding process makes the cutting edge more sharp..
  • LITTLE RESISTANCE AND SMOOTH -- Drill bit has a large scraps discharge space, little resistance and smooth..
  • ADVANTAGE -- Reduce cutting force and broken drill to improve the quality of hole wall..
  • EASY TO CHANGE OUT -- Easy to change out and do a great job cutting through the PCB for solder holes..
  • GREAT STORAGE CONTAINER INCLUDE -- Come with a great storage container, easy to find and grab the drill bit you need..
Check Stock

Tim Holtz Idea-Ology 2021 Halloween Worn Wallpaper Scraps & Halloween Backdrops Cardstock - 2 Item Bundle

  • Tim Holtz Idea-Ology 2021 Halloween Worn Wallpaper Scraps & Halloween Backdrops Cardstock - 2 Item Bundle.
  • Worn Wallpaper Scraps contains 18 unique 5 by 8 inch sheets.
  • Worn Wallpaper Scraps also contains 26 die cut scraps.
  • Backdrops Cardstock contains 24 double-sided sheets of 6"x10" paper.
  • Ideal for Cards, Journals, Collage, Mixed Media, Home Decoration and other uses.
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

Rachael Ray Accessories Kitchen Pantryware Multi Purpose/Salad Serveware/Melamine Garbage Bowl, 4 Liters, Sea Salt Gray

  • PERFECT FOR COLLECTING FOOD SCRAPS: The Garbage Bowl is the perfect receptacle for food scraps and unusable pieces that pile up when chopping, slicing and dicing.
  • CUT DOWN ON TRIPS TO THE TRASH CAN: Use the Garbage Bowl as a prep bowl to collect scraps as you go, cutting down on trips to the trashcan while cooking.
  • SEA SALT GRAY COLOR: A stylish sea salt gray finish makes the bowl perfect as a serving bowl or for countertop display between uses.
  • NO-SLIP BOTTOM AND DISHWASHER SAFE: Rubberized bottom helps to prevent slipping.
Check Stock

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

  • Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
  • 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
  • Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.
Check Stock

GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB

  • Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool.
  • Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place..
  • The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB..
  • PCB has RGB presoldered,it's under per switch.PCB RGB can support by music..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again..
Check Stock

simplehuman Compost Caddy Detachable and Countertop Bin 4 Liter / 1.06 Gallon Brushed Stainless Steel

  • SPACE-EFFICIENT AND CONVENIENT - simplehuman's compost caddy hangs neatly on the side of your trash can and is easy to detach for use on your kitchen....
  • MAGNETIC DOCKING SYSTEM - Attaches to the side of rectangular or slim liner rim trash cans to keep the compost caddy securely in place – magnets....
  • MINIMIZES ORDER AND KEEPS PESTS OUT - Food scraps are smelly, our soft-seal lid lets food scraps breathe minimizing odor and keeping pests like fruit....
  • REMOVABLE INNER BUCKET - Handled bucket holds a large amount of food scraps and is easy to remove for dumping compost or cleaning..
  • FINGERPRINT-PROOF COATING WITH AGION ANTIMICROBIAL - The compost caddy's stainless steel surface is protected by an invisible fingerprint-proof....
Check Stock

GK64 GK64x Keyboard kit CNC Wood Wooden Case Wired PCB Plate Stabilizers Walnut Wired PCB

  • Package Included: CNC Case + Feet + Screws + GK64x PCB + Plate + Plate stabilizers.
  • CNC Wood Case and the stabilizers is Genuine plate mounted stabilizers.
  • Built-in microphone under spacebar, support External sound source play.
  • The plate is FR4 plate which more soft and silent.You need to attach plate with PCB by switches.Install 4-5 switches to plate then to PCB socket at....
Check Stock

Airthereal Revive Electric Kitchen Composter, 2.5L Capacity with SHARKSDEN® Tri-Blade, Turn Food Waste and Scraps into Dry Compost Fertilizer for Plants

  • ♻️Food composters transform food scraps and kitchen waste into powder by drying it out and grinding it up. You can use this powder as fertilizer for your plants or throw it away to reduce the volume and odor of your trash..
  • ♻️More Reliable Blades: Our SHARKSDEN tri-Blade are as sharp as a shark's teeth. With six blades in a dual-layer layout, it can crush large volumes of food from multiple directions. The odor-reducing biodegradable carbon filters help prevent smells in between composting cycles..
  • ♻️Easy To Use: With a 2.5 liter capacity and one-button operation, you can compost several different types of food and scraps at the same time with the simple press of a button..
  • ♻️Eliminate Garbage Odors: Instead of putting food scraps in the trash, dry them in a food composter to prevent the garbage smell from taking over your home. The odor-reducing biodegradable carbon filters help prevent smells in between composting cycles..
  • ♻️Quick Run Time: Collect food waste in the bucket throughout the day then turn on the machine before going to bed. After 4 hours your food....
Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 50pcs PCB Drill Bit Set Spiral Flute Carbide 0.3mm-1.2mm Drill Bits for Dremel Print Circuit Board Jewelry CNC Engraving (5PCS Each) by BOOTOP

  • This PCB Drill Bit Set contains 10 different size drill bits diameter: 0.3mm, 0.4mm, 0.5mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1.0 mm, 1.1mm, 1.2mm. And each size have 5 pcs. Varies sizes to meet different needs..
  • This micro drill bits are designed to drill and engrave on print circuit board and other precise work. The PCB Drill Bits are made of high quality tungsten steel, highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency. Seismic design on the blade edge enables it to stay stable during engraving..
  • PCB Drill Bits Set are great for punching at printed circuit boards, 3D Printer Nozzle Cleaning, CNC engraving plexiglass, Amber beeswax, bakelite, jewelery, metal plastic and other precision drilling.
  • cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
  • PCB Drill Bit With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left. Package with high quality plastic box, easy carry and better protection keeps the blade tip goods in the delivery from being damaged..
  • 180 Days warranty. If you are not satisfied with our products,feel free to contact us for a replacement or refund. The PCB Drill Bits may also know as micro d....
Check Stock