Top Pcb Jacks Reviews

Fielect 2pcs IDC 26 Pin Connector Gray Wire Flat Ribbon Cable Connector Length 30cm 2.54mm Pitch

【Parameters】- Product Name: 26 Pin Connector Flat Ribbon Cable.
【High Quality】- 26 Pin ribbon cable is made of high-grade copper wire material for safe and durable to use..
【 Feature】- The conductor ribbon cable separate easily for clean terminations with standard wire connectors jacks and pins..
【Durability】- Flat ribbon cable securely connected to the pins, quick circuit experiment. In the terminals have not damaged it can be reused..
【Wide Application】- The ribbon wire is suitable for internal wiring in office equipment, audio and video machines,Easily and directly inserted into PCB..

Check Stock

TEMCo 80+7.5 uf/MFD 370-440 VAC Volts Round Dual Run Capacitor 50/60 Hz AC Electric - Lot -2 (Optional uf/MFD, Voltage and Lot Quantities Available)

Save time with this handy box full of the most practical and common e-components.
1000 pcs Resistor, 170 pcs Transistor, 120 pcs Electrolytic Capacitors, 100 pcs Diodes, 200 pcs 3mm 5mm LED, 310 pcs Ceramic Capacitors, 3 pcs DC-022 3 pcs DC-005 DC jacks, 2 pcs LM358, 2 pcs NE555, 2 pcs JRC4558, 1 mini speaker, 2 pcs 1n270 Germananium Diode, 2 pcs Germanium Transistor, 12 pcs Trim Potentiometer, 4 pcs PCB.
The Assortment comes in durable cardboard box, each components type is sorted accordingly.
Each different component is packaged in a plastic bag, Resistors values are stamped with the according value.

Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
Replacement microswitch PCB for Sanwa JLF series Joysticks.
Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
Package include One pcs Original Sanwa TP-MA PCB with Microswitch.

Check Stock

Dumble RV Stabilizer Jacks - 4pk Attachable Telescoping Travel Trailer Jack Stabilizer Stands and Jack Rod

[Level Up Your Travel Game]: Ensure stability when loading and unloading with the Dumble RV Supplies Folding Trailer Stabilizer Jacks for Campers and more.
Includes 4 flip down trailer legs, 1 handle, and mounting screws.
[Optimal Weight Capacity]: Each RV jack stand provides a lift capacity up to 650 pounds (294.8kg) and a 1,000-pound (453.6kg) breaking point.
Rear trailer stands work as sport utility trailer jacks, pop up camper stabilizer jacks, RV leveling jacks, food truck drop leg trailer supports, and boat trailer drop jacks.
[Expanding Height]: Telescoping stabilizer jacks can be adjusted from 12 to 18 inches (30.5 to 45.7cm) tall effortlessly by using the 11.7-inch (29.7cm) long steel jack rod handle.
[Built To Last]: Premium powder-coated steel trailer leveling jacks resist outdoor elements for long-lasting reliability.
Trailer jack foot plate measures 3.4 by 3.9 inches (8.6 x 9.9cm) wide for stability.
[Folds Up for Safe Travels]: Mount to camper bumper, then pull down on leg to fold cargo trailer jack stands up and down.
Spring mechanism and notch catches ensure a secure hold when driving.
Swing down trailer stabilizer jacks will stand 4.1 inches (10.4cm) from mounted surface.

Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
Replacement microswitch PCB for Sanwa JLF series Joysticks.
Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
Package include One pcs Original Sanwa TP-MA PCB with Microswitch.

Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..

Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....

Check Stock

FL ESPORTS MK870 CMMK 87 Keys RGB Modular Mechanical Keyboard, 80% TKL Wired Gaming Keyboard DIY Kit w/Hot-Swap Switch Sockets (5-pin) & Customizable Software Supported (Barebones, Frosted Pink)

No-Brainer Assemble -- 5-pin supported switch sockets are placed in easily plate mounted PCB base, quickly mod 99%+ types of switch (3 pins/5 pins) with no need of assemble guide researching..
3 Jacks to Light Up Triple the way to get your keyboard connected with decent RGB backlight, the translucent frosted case upgraded the glowing effect. Each LED has been precisely calibrated to unchain the epic RGB illumination solution..
Near-infinite Customization -- 16.8 million colors in various preset and custom modes, endless shortcuts are all stand by for easy setting and assignment in software. Check the below product detail info for software/driver download source..

Check Stock

Chelsea Aged Bronze 1 Cable TV with Hardware

Add a classy antique look to any room with these metal oil rubbed bronze wall plates.
In styles and finishes that complement the most popular interior fashions.
Lacquer protected...provides superior finish to cheaper stamped steel plates.
Oil rubbed bronze with subtle copper hues Includes mounting screws.
Choose from Phone Jacks, Cable (Coax) Jacks, Data (Cat 5) Jacks, Multiple & Combination Jacks.

Check Stock

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.

Check Stock

WE Games Metal Jacks Game, Retro Game with 2 Sets of Metal Jacks and Ball in Keepsake Wooden Box, Nostalgic Toy Set for Kids and Adults, Old Fashioned Floor Games, Jacks and Ball Travel Game Set

OLD FASHIONED JACKS GAME: Take a trip down memory lane with this classic game that’s fun for the whole family! Scatter Jacks, Knucklebones, or whatever you call it, this nostalgic jacks set includes 5 silver and 5 gold metal playing jacks, 2 red bouncy balls, and a carrying case..
WOODEN BOX FOR STORAGE: Includes one set of jacks in a keepsake wooden box. The nostalgic keepsake box features a magnetic closure and measures 3.5 x 3.5 x 1.5 inches, making it perfect for travel or for storage at home..
TRAVEL GAME: Bring this jacks game travel set with you on the go for family vacations, road trips, and to school for classroom fun. Includes 2 sets of jacks to include everyone. Great for playing alone or with others!.
GREAT GIFT: Give the game of jacks as a gift to friends and family. It’s easy to learn and the better you get, the more you want to play! Work on math skills, socialization, hand eye coordination with kids and adults too..
WE GAMES: Making the world’s best traditional game since 1977. Our games are crafted with high quality sustainable materials with attention to fin....

Check Stock

GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB

Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool.
Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place..
The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB..
PCB has RGB presoldered,it's under per switch.PCB RGB can support by music..
There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again..

Check Stock

RVMATE Stack Jack 4 Pack, for RV, Camper and Trailer Stabilization, Aluminum RV stabilizer, Adjustable from 11 inch to 17 inch

Great for supporting a light RV, trailer and camper, offer additional stabilization. Do not use these jacks to lift your RV!.
Stack jack can be extended from 11" to 17". We recommend max height of 15" for best performance, prevent jacks being unstable..
Just rotate the T-shape rod and extend jacks, easy to set up. You could also place wood and plastic blocks under the jacks to make it more stable..
Made of high quality aluminum，water-proof and built to last..
With free reusable bag, you could store these jacks easily..

Check Stock