Top Pcb Boards Reviews

zgs78hh 18V Battery Chip Protect Board Replacement Battery Protection, Circuit Board for Makita BL1830 BL1850

【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.

Check Stock

6 Packs Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 2.5mm Width 1.5m Length

What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs.
No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards.
Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.
Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.

Check Stock

JODROAD RJ45 Coupler, Ethernet Couplers, Ethernet Extender Adapter, Cat8 Cat7 Cat6 Cat5e Cat5 Inline Coupler, Ethernet Connector Female to Female (2Pcs, Black)

✅Speed Up to 10 Gbps: Ethernet couplers adopting high precision PCB board provide data transmission speed up to 10 gigabits per second for connecting Cat8/Cat7/Cat6/Cat5 Ethernet cable. Meet or exceed Category 7 network performance..
✅ High-precision PCB Board: The RJ45 Coupler adopts high precision PCB boards and passed profession test, compared with other regular PCB boards. it's more stable and reliable.(Regular Cheaper RJ45 coupler, please refer to ASIN:B09TRCG2WW).
✅Gold-Plated Contacts: feature better corrosion protection,electrical conductivity and stronger durability compared with nickel-plated. Therefore,data transmission is more stable and without worrying about loss of signal..
✅Easy and Efficient Extension: Plug & Play without installing a driver and easily connects two network cables together for extended-length applications..
✅Premium Quality: Made of high quality ABS material and feature high-impact and fire-retardant.meets Category 7 performance in compliance with the TIA/EIA 568-C.2 standard .it's fully ROHS compliant..
✅Widely Compatible: These Ethernet Connectors work with Cat5 Cat5e, Cat 6, Cat 6e, Cat 7 and Cat8 Ethernet cables.suitable for home ,office network cable extension ,Server room, POE security camera extension an....

Check Stock

Cermant 20PCS 15x18cm Bakelite Prototype Board PCB Printed Circuit Board for Soldering Electronics Project Experiment for Arduino DIY Electronics Experiments (5pcs 15x18cm)

Pcb prototype board, the proto boards are in the color of Red.
Material: 94HB Bakelite Prototyping Board.
FEATURES - The proto boards are thick and single sided. The plated holes are pre-coppered and very solid which make them very easy to solder components on..
PACKAGE CONTENT - 5pcs x Universal PCB Board.

Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

...omes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitate to contact us with Amazon email. We will reply and give you satisfying solution within 24 hours!.

Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 80mmx120mm, Green Pack of 4

These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
The prototyping boards we provide here are in the size of: Dimension: 80mm x 120mm / 3.15 x 4.72 inch (W*L).
They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
Please read the measurements before ordering if you are concerned about the size..

Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 20mmx80mm, Black Pack of 5

These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
The prototyping boards we provide here are in the size of: Dimension: 20mm x 80mm / 0.79 x 3.15 inch (W*L).
They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
Please read the measurements before ordering if you are concerned about the size..

Check Stock

The Ultimate Engineer Adult Coloring Book: A Funny, Relatable & Snarky Adult Coloring Book For Engineers

♻️ These great drink coasters are made of real circuit boards. they are absolutely insensitive to temperature and are easy to clean. Perfect for all hot and cold drinks. Hand washable. and the cute coasters look stylish on office desks and coffee tables alike!.
♻️ The drink coasters measure 8.5 x 8.5 cm(3.35 X3.35'')and have rounded corners. Each order contains either 2/set or 12/set depending on order selection. the cool coasters come with a unique design box. It's also the best father's Day gift.
♻️ PCB Coasters Gift for Him and her. Geek Chic for The Party Host. Great gifts for the engineer, computer scientist, or general tech-loving friend! and make wonderful coasters for your coffee cup mug at work. Your friends and colleagues will be envious.It is also nice for housewarming gifts new home..
♻️ These great table coasters are made of real circuit boards and are a real eye-catcher. The conductive tracks of cup coasters are covered with an ultra-thin layer of real gold for a unique look. They give the environment a unique industrial style. the circuit board coasters are great for home d....

Check Stock

Circuit Board Holder with Adjustable Heavy Duty Base Large Soldering Helping Hand Vise 360° Rotated For Clamping PCB solder DIY Printed Circuit Board Stand NEWACALOX

Non-slip PCB clips: The PCB clips on the holder is easy flips printed circuit boards 360°, use better elasticity springs to avoid slipping, easily....
Sturdy construction and easily adjusted. The Soldering helping hand holder is made of aluminum alloy and has 3 screws to tighten and fix, heavy and....
Equipped with 4 rubber feet under the base ensure stability, so the holder will not slide around on the bench. keeping safe. the base is solid and....
Adjustable PCB holder frame: The rolling bearing makes the bracket move more smoothly without jamming, the ability to rotate is great for switching....
Easy to Install and easy to use: It is very convenient to insert the pcb board and easy to remove. You could make any position adjustment you want by....

Check Stock

Hotop 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Multi-color,1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm)

What you get: come with 6 pieces of no-clean solder wicks in different size, including 0.04 inch, 0.05 inch, 0.07 inch, 0.1 inch, 0.12 inch, 0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs.
No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards.
Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.
Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.

Check Stock

250pcs Standoffs Nylon M2 M3 Male Female Hex Column Standoff Screws Nuts Assortment Kit for Communication Electroplating M3 Male Standoff A

250pcs standoffs are made of durable environmentally friendly nylon PA66, which has stable and long-lasting acid resistance, alkali resistance, insulation and signal interference resistance..
The waterproof nylon spacer support is rust-proof and easy to clean. You only need to clean it with a cloth..
There are 4 different kits to meet your building needs, including various male or female brackets, nuts and screws..
Threaded standoff is very suitable for installation between the PCB circuit board and the machine board. It is very suitable for creating hot channels between chips, or creating multi-layer and multi-layer "nerd" homemade circuit board arrays..
They are not easy to slip when used correctly. It is very suitable for installing boards between PCB circuit boards and machines, and is widely used in communications, electroplating, medical equipment, office equipment, electronic products and other industries..

Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 50pcs PCB Drill Bit Set Spiral Flute Carbide 0.3mm-1.2mm Drill Bits for Dremel Print Circuit Board Jewelry CNC Engraving (5PCS Each) by BOOTOP

...her precise work. The PCB Drill Bits are made of high quality tungsten steel, highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency. Seismic design on the blade edge enables it to stay stable during engraving..
PCB Drill Bits Set are great for punching at printed circuit boards, 3D Printer Nozzle Cleaning, CNC engraving plexiglass, Amber beeswax, bakelite, jewelery, metal plastic and other precision drilling.
cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
PCB Drill Bit With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left. Package with high quality plastic box, easy carry and better protection keeps the blade tip goods in the delivery from being damaged..
180 Days warranty. If you are not satisfied with our products,feel free to contact us for a replacement or refund. The PCB Drill Bits may also know as micro drill bits,NCN drill bits,micro drill bits set,plexiglass drill bit set,circuit board drill bits,pcb drill set,drill bits for dremel tool,small diameter drill bits, PCB drill bit set..

Check Stock

GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)

This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
3PCS Proto Breadboard PCB Board Gold Plated Experimental Breadboard Soldering Board Double-Sided PCB.

Check Stock