Top Pcb Board Assemble Reviews

DJI Original Replacement Basic Air Frame Kit for Flame Wheel F550 DIY 6-Axis Multi-rotor Hexacopter

  • Frame arms adopt PA66+30GF supper strength material and provide better crashworthiness.
  • Using high strength compound PCB frame board, which makes wiring of ESCs and battery more easily.
  • Optimized frame design, which provides abundant assemble space for autopilot systems.
  • Recommended propeller (in): 10 x 3.8 / 8 x 4.5.
  • Recommended motor (mm): 22 x 12 (Stator size).
  • Screws (motors, ESC, propellers, controller and battery etc NOT included).
Check Stock

AmScope - Adjustable Circuit Board Holder and Clamping Kit PCB Holder Frame - Single Pack - 1 Piece

  • Adjustable printed circuit board holder (PCB) holds objects in place for soldering, repair or inspection functions.
  • Wide base with rubber feet creates a solid and safe work platform.
  • Spring-loaded clamp holds objects up to 7 ¾” wide (198 mm) securely in place.
Check Stock

Prototype Screw Terminal Block Shield Board Kit MEGA-2560 R31

  • FLEXIBLE USE---Without assembled, the prototype screw terminal block shield board allows you to try variety mount methods, so that you can use it flexibly.
  • COMPACT STRUCTURE---With compact structure, the prototype screw terminal block shield board is made up of screw terminal block, high quality PCB carrier, FR-4 glass fiber PCB.
  • RICH COMPONENTS---The prototype screw terminal block shield board includes prototype PCB, terminal blocks, and female header sockets, satisfying your working needs.
  • LONG SERVICE PERIOD---Made of high quality of material, and with delicate workmanship treatment, the prototype screw terminal block shield board has long serving life, practical and economic.
  • EXCELLENT AFTER SALE SERVICE---Except the premium product we provide, we also provide considerate after sale service. Please contact us for any problem about our product. It is our pleasure to service you.
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

LANDTONE Guitar Pedal Kits Overdrive (OD1) with Pre-drilled1590B Box Hand Made

  • 1.Use this kit build your own high quality Overdrive pedal..
  • 2.The PCB board is well marked and easy Assemble.
  • 3.Use Hand Made 1590B Diecast Aluminium Casing.
  • 4.Factory direct sales, quality assurance, low price.
  • 5.Size: 112mm x 60mm x 32mm / 4.4"*2.36"*1.26".
Check Stock

ASUS SBC Tinker board RK3288 SoC 1.8GHz Quad Core CPU, 600MHz Mali-T764 GPU, 2GB

  • High performance QuadCore ARM SOC 1.8GHz with 2GB of RAM -The Tinker board features the Rockchip RK3288 Soc with Mali – T764 GPU and 2GB of Dual Channel DDR3 memory.
  • Non shared GBit LAN, Shielded Wi-Fi with upgradable antenna support – Tinker board features a high speed non shared GBit LAN port for improved performance along with integrated shielded Wi-Fi for robust IOT & network connectivity.
  • Highly compatible PCB & Topology –Leveraging industry standard PCB & topology dimensions along with IO and connection placement, Tinker board offer extensive compatibility with SBC accessories & chassis..
  • HD Audio & HD & UHD Video Support – Tinker board supports HD audio 192/24bit audio along with accelerated HD & UHD ( 4K ) video playback support* requires use of Rockchip video player in TinkerOS.
  • DIY Friendly Design – Tinkerboard features multiple DIY friendly use features including a color coded GPIO header, silkscreen PCB and color coded pull tabs.
Check Stock

VEVOR Preheating Oven T8280 1600W Infrared Preheating Station Hot Plate PCB Preheater 280x270MM

  • Preheating Station Work Bench Size :410x316mm.
  • Complete Preheating Oven Machine Power :1600W.
  • PCB Preheater Heating plate temperature can be adjusted: 0-450 degree.
  • Preheating Oven T-8280 Can Achieve To Heat PCB Board And Component Which Contains Lead Or Not，Especially For The BGA And SMD Parts.
  • Preheating Station Use Infrared Heat, Easy To Cut Through, Heat Proportion, Don’T Have Sirocco Flow. Don’T Shift The Small Components On The PCB Board，Ensure The Welding Quality.
Check Stock

HPYNPES DIY Practical Soldering Practice Kit Practice Learning Electronics Training Board

  • Product introduction: Shake the lucky turntable by NE555 and CD4017 chips combined with LED random output function. The control terminals are button control and vibration switch control. You only need to press the button or shake it, the LED will start to rotate, and the After a while it stops randomly, leaving only one LED light..
  • Designed for Beginners：Special design for electronics starter to learn to solder electronics components. Soldering project kit will improve your electronic knowledge and soldering skills in practice.
  • Easy to Assemble： Electronic DIY kits uses safety materials, effectively avoid corrosion and wear out. Components’ names have been marked on the PCB board and the circuit design is simple. Even beginners can easily solder successfully.
  • Warm Reminder ：DIY electronic components kit requires buyer to assemble and welding, If you don't have any soldering experience, please read the soldering instructions and use soldering tools carefully to avoid safety problem.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Strobe Receiver

  • Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
  • The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
  • 12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
  • The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
  • It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

WiFi Wireless Card Module PCB Board for Nintendo DSi NDSI Replacement DWM-W024

  • Wifi Wireless Card Module PCB Board for Nintendo Wii U..
  • Please check description , the images and package carefully ..
Check Stock

Bluetooth Amplifier Board 25W+25W HF63 Dual Channel Audio Amplifier DC 10-25V Digital Amplifier Module with TDA7492P Chip

  • High Quality : The amplifier board adopts TDA7492P power amplifier chip, high quality electronic components and military grade PCB board, durable in use..
  • 2 Channel : This board is designed with dual channel output, 25W left channel and 25W right channel, high transmission rate and good sound quality..
  • Bluetooth Connection : The amplifier board is designed with Bluetooth V2.1 module and power supply reverse connection protection, convenient and safe to use..
  • Application : This digital amplifier board is suitable for upgrading and refitting the idle sound box and DIY production. It is suitable for speaker of 4Ω, 6Ω, 8Ω, 16Ω (8Ω is the best)..
Check Stock