Top Passive Antenna Reviews

DEVMO NEO-7M GPS Satellite Positioning Module with SMA Antenna Interface Compatible with Ard-uino STM32 C51 Replace NEO-6M

  • ★Get 51 Ard-uino STM32 microcontroller routine..
  • ★with a USB interface, you can watch the computer positioning effect directly phone line..
  • ★with the passive ceramic antenna and passive antenna amplifier, make better use of the individual effects..
  • ★with SMA interface can be directly connected to an active antenna SMA..
  • ★TTL level, compatible with 3.3V/5V systems. TTL level, compatible with 3.3V/5V systems..
Check Stock

Ximimark NEO-7M UBLOX GPS Satellite Positioning Module with SMA Antenna Interface for Arduino STM32 C51 Replace NEO-6M 3.3V/5V Power Supply 1Pcs

  • Get 51 Arduino STM32 microcontroller routine..
  • with a USB interface, you can watch the computer positioning effect directly phone line..
  • with the passive ceramic antenna and passive antenna amplifier, make better use of the individual effects..
  • with SMA interface can be directly connected to an active antenna SMA..
  • TTL level, compatible with 3.3V/5V systems..
Check Stock

Sutekus AN200 AM Loop Radio Antenna Tunable Indoor Antenna for Singal Enhancement

  • Fully adjustable indoor antenna for the AM broadcast band [530-1710 KHz]..
  • Just place the loop beside the Radio Set(Inductive coupling), or use the cord included to connect your radio with antenna to improve reception..
  • The large base makes it easier to emplace onto a flat surface, and small radios can be placed inside of the antenna to get significant signal improvement..
Check Stock

Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier (Renewed)

  • The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels.
  • works with any passive/non-amplified antenna.
  • antenna required for use with preamplifier.
  • TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna..
  • Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation.
  • Includes Winegard Boost LNA-200 digital TV antenna amplifier, 110v adapter, power inserter, hose clamps and printed documentation. Designed and built in the U.S.A..
  • Note: Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified.
  • dependencies include location of TV towers, building materials, and the actual antenna being used.
Check Stock

Gowoops GPS Module with 3m Active Antenna for Arduino STM32 51 Single Chip Microcomputer

  • 1. With micro USB port, you can use general mobile phone cable to connect the GPS module to your computer. Do not need USB-TTL, convenien for use..
  • 2. The GPS module has ceramic passive antenna, you can search the satelite in a open area, do not need the external antenna..
  • 3. With SMA port, convenient for connect with the 3m Active Antenna, stronger satelite search ability..
  • 4. With the reserved TTL port, covenient for connect to USB-TTL or external single chip microcomputer..
Check Stock

Ematic EDT201ANT Ultra-Thin Indoor HDTV Antenna with Amplifier 50-Mile Range, Black

  • Ultra-thin indoor HDTV antenna with amplifier 50-mile range, black.
  • Receives free broadcast HD TV signals with enhanced gain, range and frequency performance and the amplifier will enhance the performance of passive antennas in challenging areas of reception.
  • Connect the cable of the antenna to input jack of the amplifier, then connect the amplifier's built-in cable to the antenna input on your TV/converter box and it will amplify the signal by 20 miles.
Check Stock

Winegard Elite Outdoor VHF/UHF HDTV Antenna – 70 Mile Range & LNA-200 Boost XT HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier

  • o Includes antenna with embedded Boost ultra low noise amplifier, inline 5V power inverter, 3′ USB power cable with 110V adapter, and mounting bracket.
  • The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels.
  • works with any passive/non-amplified antenna.
  • antenna required for use with preamplifier.
  • TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna..
  • Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation.
  • Includes Winegard Boost LNA-200 digital TV antenna amplifier, 110v adapter, power inserter, hose clamps and printed documentation. Designed and built in the U.S.A..
Check Stock

RCA Basic Flat Indoor Antenna

  • Boost the reception of your digital or analog signal television.
  • Enhances the performance of passive antennas in challenging areas of reception.
  • Preserves signal purity with Extremely Low-Noise (ELN) circuitry.
  • Turn a TV with spotty reception into one with crisp and clear reception.
  • Connect the cable of the antenna to input jack of the amplifier, then connect the amplifier's built-in cable to the antenna input on TV/ converter box.DISCLAIMER: Reception quality and channels received will depend on distance from towers, broadcast power, terrain and other factors.
Check Stock

McDuory Amplifier with 4-Way Splitter Clear Up/Amplify Pixial Low Strength Signals to Up to 4 TVs Compatible with Most Passive Antenna and TVs

  • Signal Amplfier-- McDuory Booster enhance signals strength received with your indoor / outdoor antenna. The amplifier function will clear up any low-strenth fuzzy and pixial signals. Note: The quantities of channels you can receive may depend on different circumstances..
  • 4-Way Splitter -- CX-4FA McDuory Amplifier is with 4-Way Splitter function. It works with most TVs and Passive Antenna in the market. Distrubuting ONE signal source to up to 4 devices with F-F Connector. CABLE not included..
  • Easy Install-- Very easy to use this CX-4FA Amplifier with Antenna and TVs. Set it up with AC Power Insert and follow the indication to connect to Antenna and different TVs..
  • Indicator Light-- Make Sure the indicator light is ON when you are using it with Antenna and TVs..
  • Warm Note-- Using CX-4FA does not gurantee to receive all Signals from broadcast towers. Signals reception may depens on weather, distance, obstacles, and the antenna too..
Check Stock

2450mAh for Franklin Wireless WiFi Mobile Hotspot R850 Battery Replacement R850 Boost Mobile Sprint Virgin Mobile

  • It's compatible with Sprint Franklin R850 4G LTE Mobile Hotspot.
  • This is a passive adapter which does not work as well as an adapter that connects directly to the device. Adapter attaches with Velcro on back of....
Check Stock

Passive External Antenna Adapter Cable for Verizon Jetpack 4G LTE Mobile Hotspot MiFi 5510L 890L Fme Male Connector

  • The passive antenna adapter is held securely in place by a Velcro strap allowing for quick and secure connections to any USB modem or phone. No....
  • This is a passive adapter which does not work as well as an adapter that connects directly to the device..
Check Stock

Winegard Boost XT Pro - Outdoor Ultra-Low Noise Preamplifier + Integrated Channel Finder

  • The Winegard Boost XT Pro enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels. Only works with any passive/non-amplified antenna..
  • The integrated signal meter makes you the pro at installation. Pair with the Winegard Connected app for no-fuss antenna positioning..
  • TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels..
  • Winegard’s Clear Circuit Technology offers the lowest noise (1dB typical) to deliver more range and less signal dropout and pixelation..
  • Included components: Preamplifier, 110V adapter, hose clamp, USB power cable with 110V adapter, app-enabled Bluetooth technology signal meter, and printed documentation.
Check Stock

Novawave Digital Antenna for TV G2 - High-Powered HD TV Antenna | 30 Mile Range Indoor TV Antenna for Clear Signal | 720-1080P High Definition TV Antenna for Smart TV with 5-7 dBi gain | App Included

  • ...NNA WITH LARGER MAST RECEPTION - Enjoy seamless HDTV of digital terrestrial signal (DVB, DVB-T2, ISDB-T, DMB-T/H) and DAB/FM radio and have the advantage of 30% larger ota antenna indoor mast reception area than Novawave G1 HD digital tv antenna! PLEASE NOTE: NOVAWAVE ANTENNA DIGITAL BOOSTER SOLD SEPARATELY..
  • INDOOR PASSIVE HD TV ANTENNA RETRIEVES HIGH DEF CHANNELS - High-quality performance and flexibility to tune tv channels. Boasting 5-7 dBi gain and 87.5-230MHz/470-862MHz signal strength, this antenna tv digital hd indoor excels in picking up both VHF and UHF broadcast tv antenna signal for clear vision and audio..
  • SAVE MONEY ON EXPENSIVE INDOOR TV ANTENNAS AND UPGRADES - Save hundreds of dollars on expensive hd antenna for tv indoor aerials and upgrades with the new Novawave over the air antenna indoor. A powerful flat antenna for tv that lets you watch your favourite channels in HD!.
  • SLEEK, MODERN DIGITAL HIGH DEFINITION ANTENNA FOR TV CAN BE INSTALLED ANYWHERe - The Novawave digital hd tv antenna flat, ultra-thin design fits with any interior décor. Let the smart tv antenna for local channels sit unobtrusively near your TV or place it on the wall, on a shelf, or stick it to any other non-metallic surface..
Check Stock