Top Oxygen Sensor Socket Set Reviews

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
3 types of universal socket wrenchs cover various situations of oxygen sensor location.
6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.

Check Stock

HYAT 5pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines.
3 Different types of sockets cover various situations of oxygen sensor locations.
Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires.
Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.

Check Stock

KUNTEC 21 Piece O2 Sensor Socket Set Universal Oxygen Sensor Removal Install Tool Set

Oxygen Sensor Socket is designed for the removal and installation of oxygen sensors, injectors and thermal switches.
Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
7/8inches Short low Profile O2 Oxygen Sensor Socket, 7/8inches Universal Oxygen Sensor Socket.
Universal fit for Audi, BMW, Citroen, Mercedes, Ford,Peugeot, Renault, Skoda,OPEL, Volkswagen and so on.
O2 Oxygen Sensor Socket is constructed from chrome-vanadium steel (CR-V) for extra strength and longevity, protect them from rusting.

Check Stock

Offset Oxygen Sensor Socket 3/8-Inch Drive 7/8-Inch 22mm Wire Gate Accesses Sensor from Side Preventing Damage to Wires Universal for Most Cars

PREMIUM QUALITY: Made of premium chrome molybdenum steel, this socket allows the user to apply maximum torque to ensure precise assembly and function.....
DESIGN: The socket has a slotted design. So you remove the oxygen sensor with the harness still connected. This 3/8" drive oxygen sensor socket is....
FEATURES: 7/8" (22mm) socket fits most oxygen sensors, works with any 3/8" drive ratchet or breaker lever, offset drive gate with wire links the....
FUNCTION: This oxygen sensor is very convenient to use, the sensor is in the harshest environments and may need to remove some elbow grease, this....
WHAT YOU GET: 1 x Offset Oxygen Sensor Socket. This product is sure to meet your requirements. If you have any questions, please contact us in time,....

Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches.
Each socket is permanently etched with size marking for your convenience.
MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
Sizes include 22mm (7/8”), 27mm, and 29mm.
For both heated and non-heated oxygen sensors.
Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
Tools have a light coating of oil to protect them from rusting.
EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) v....

Check Stock

aremnry 7pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set Vacuum Switch Socket Removal Installer Tool Kit

【Applications】 Designed for the removal and installation of oxygen sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes..
【Material Solid】 Heat treated chrome vanadium & chrome molybdenum steel (CR-V) with black oxide finish for corrosion resistance..
【Including】7/8" Short low Profile O2 Oxygen Sensor Socket, 7/8" Universal Oxygen Sensor Socke 7/8" Universal Vacuum Switch PVS, TVS Socket Tool..
【Function】 This set can work in the tight space around an O2 sensor to remove or install quickly and efficiently..
【Easy Storage】Comes in a blow molded case for safe & easy transport and storage..

Check Stock

GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720

Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units.
Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units.
Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units.
Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit.
Includes 1/2" Drive 1-13/16" socket for Oil Sending Unit.
Includes 1/2" Drive 1-1/16" socket for Thermal Sensor units.
Durable blow mold case for safe storage and tool retention.

Check Stock

Bosch 17018 Original Equipment Wideband Oxygen Sensor for Select 2000-02 Subaru Forester, Impreza, Legacy, and Outback Vehicles

Offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots.
Slotted design allows removing oxygen sensor with wiring harness attached.

Check Stock

HFS (R Automotive Oxygen Sensor Socket Set (3PCS Socket Set)

Designed for the removal and installation of oxygen sensors, pressure sending units, and vacuum switches equipped with wires or vacuum tubes.
Including 7/8" Short low Profile O2 Oxygen Sensor Socket, 7/8" Universal Oxygen Sensor Socke 7/8" Universal Vacuum Switch PVS, TVS Socket Tool..

Check Stock

Apeixoto Oxygen Sensor Removers 5PCS Oxygen Sensor Sockets with Packing Case Oxygen Sensor Socket Set Removal Tool

Function: The Apeixoto oxygen sensor removers will help your in adjusting and removing oxygen sensors, oil pressure sending unit vacuum switches and fuel injections. These tools can be used most vehicles..
Package: The package includes 5pcs sockets and wrenches included in the red case.The whole tool set comes in a solid red case which will protect the tools well during shipping and let you keep the tools well after usage..
Specifications: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Material: The Apeixoto oxygen sensor removers and oil Pressure Sending Units are constructed with heat-treated chrome vanadium steel. It is totally rust and corrostion resistant. The surface has a black powder and it looks much more shinny..
Warranty: 100% satisfaction. If you come across any issue or need any assists during usage, we are here to help..

Check Stock

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool

REMOVE OXYGEN SENSORS FROM YOUR VEHICLE: This 10 Piece Specialty Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes.
Remove and install parts on most domestic and some international vehicles.
USE WITH YOUR TOOLS: Features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives.
For use with ratchet, breaker bar, or hand wrench (driver tools not included).
Use this tool in conjunction with the O2 Sensor Thread Chasers to install new sensors easily (thread chaser and sensors not included).
BUILT TO LAST: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity.
Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion.
CONTENTS: This specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8” x 50mm, 3/8 inch dr x 7/8” x 6PT x 80mm, 3/8 inch dr x 7/8” x ....

Check Stock

Tribus Tools Oxygen and NOx Sensor Wrench (15/16\)

[SIZE]: 3 piece 3/8 & 1/2" drive O2 oxygen sensor wrench socket tool set.
universal 7/8"/22mm professional grade removal tool for cars & automotive.
[ITEM INCLUDES]: 1 vacuum switch socket & 2 puller sockets kit.
[MATERIAL]: Constructed of high performance (cr-v & cr-mo) vanadium and chrome molybdenum solid cast steel for strength and durability - finished with black oxide to prevent rust.
[APPLICATION]: Remove and install oxygen sensors and hex vacuum switches on vehicles.
[PACKAGE]: Packed in a blow-molded storage case.

Check Stock

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool

PackageIncludes 2 7/8" 3/8 Inch Drive Vacuum Switch Sockets and One 7/8" x 1/2" drive Oxygen Sensor Socket.
Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
Usage Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
Service 100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Check Stock