Top Output Voltage Range Reviews

Victron Energy Orion-Tr Smart 12/24-Volt 15 amp 360-Watt DC-DC Charger, Isolated (Bluetooth)

Input voltage range: 10-17V --- Output voltage adjust range: 20-30V --- Cont. output current at nominal output voltage and 40°C: 15A --- Maximum output current (10 s) at nominal output voltage minus 20%: 25A.

Check Stock

Victron Energy DC-DC Bluetooth Charger Orion-Tr ORI 122436120 Smart 12/12-30A (360W) Isolated B2B Booster

Input voltage range: 10-17V --- Output voltage adjust range: 10-15V --- Cont. output current at nominal output voltage and 40°C: 30A --- Maximum output current (10 s) at nominal output voltage minus 20%: 40A.

Check Stock

Voltage Measurement Module, DVB01 Voltage Comparator for Voltage Measurement for Control Applications

The LM2903P devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
Single-supply or dual supplies Wide range of supply voltage Maximum rating: 2 V to 36 V.
Low supply-current independent of supply voltage: 200 µA per comparator, Output compatible with TTL, MOS, and CMOS.
Common-mode input voltage range Includes Ground, Low output saturation voltage.
Differential input voltage range equal to maximum-rated supply voltage: ±36 V.

Check Stock

DCDC Converter, DROK Step Down Voltage Regulator Module DC 4.5-40V 36V 24V to 1.25-37V 12V 9V 5V 3V Variable Buck Converter Adjustable Electronic Power Supply Volt Reduce Transformer Stabilizer Board

DROK DCDC converter input voltage range is DC 4.5-40v, output voltage range is DC 1.25-37v, the voltage is continuously adjustable. It is a non-isolated buck converter, can dial down voltage from 36v 30v 24v to 12v 5v 3.7v 3.5v 3.3v 2v..
Analog Control: Our DC buck converter is designed with a adjustable potentiometer, the output voltage can be easily and accurately adjusted with a mini screwdriver. Clockwise to step up voltage and counterclockwise to step down voltage..
Protection: This power supply supply step down regulator is with over-temperature and short-circuit protection, which protect your device from damaging and enhance its safety when using..
Low Power-consumption: Although the voltage range is wide, this buck voltage module has a low power consumption of only about 3A when in static state..
Note: Please make sure the input voltage is at least 1.5V greater than output voltage to ensure stable output.
please note that there is no reversed connection protection, so check the polarity of input voltage before power on to avoid burning due to reversed connection.
please add heatsink when the output power is larger than 15W..

Check Stock

Songhe LM2596S LM2596 with LED Display Voltmeter Buck Converter DC-DC 4.0-40V to 1.25-37V 2A Voltage Adjustable Board Step Down Module Power Supply Module 5pcs

This module can be applied to fields in the input voltage is higher than the step-down output voltage, such as batteries, power transformers, DIY....
With a voltage meter and voltmeter displays self-calibration. Uses a more advanced microprocessor voltage voltmeter error ± 0.05V, Range 0 ~ 40V. (To....
Touch of a button to switch the input or output voltage measurements and has a light show which is being measured voltages, and save the settings,....
Input Voltage 4.5~ 40V. (Input voltage must be higher than the output voltage of 1.5v or more).
Adjustable output voltage range of 1.25V ~ 37V continuously adjustable. (Input voltage must be higher than the output voltage of 1.5V).

Check Stock

Juried Engineering LM2903P LM2903 Dual Differential Comparator Automotive Grade Breadboard-Friendly IC DIP-8 (1 Piece)

The LM2903P devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
Single-supply or dual supplies Wide range of supply voltage Maximum rating: 2 V to 36 V.
Low supply-current independent of supply voltage: 200 µA per comparator, Output compatible with TTL, MOS, and CMOS.
Common-mode input voltage range Includes Ground, Low output saturation voltage.
Differential input voltage range equal to maximum-rated supply voltage: ±36 V.

Check Stock

SMKAN DP20V2A Constant Voltage Constant Current Programmable Control Step-down Supply Power Module

The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A. Boot voltages can be stored freely and the model has two groups of quick storage voltage. Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required. LCD display on the model has the function digital voltmeter and ammeter. You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power and LCD brightness..
Adjusting preset voltage:Pressing SET button, page down to U-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choose the numeric value you want to adjust. Turn codding potentiometer to adjust the numeric value. If you want toexit adjusting voltage, press shortly SET. In the process of adjusting preset voltage, if you open output voltage mode by pressing the ON/OFF, the output voltage will be refreshing by increasing or decreasing the numeric value.

Check Stock

Comparator Dual177;18V/36V 8-Pin SO N T/R

Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.

Check Stock

D-PLANET [8-Pack] LM2596 DC-DC Adjustable Buck Converter 3-40 V to 1.5-35v Step Down Power Supply High Efficiency Voltage Regulator Module …

Input voltage range： DC 3 -40 V (input voltage must be 1.5 V higher than the output voltage, no boost).
Output voltage range：Output: DC 1.5 - 35 V voltage is continuously adjustable, maximum output current is 3 A.
8 pieces of LM2596 board and heat sinks included.
Easy to make it work and convenient to accurately adjust the output voltage with a mini screwdriver..
100% SATISFICATION SERVICE: If there are any problem with our products, please feel free to contact us. you can request a refund for any single module....

Check Stock

DROK LM2596 Analog Control Buck Converter DC-DC Step-down Transformer Voltage Regulator Module 36V 24V 12V to 5V 2A Power Inverter Volt Stabilizer with Red LED Display Voltmeter Board Input/Output Voltage

Analog Control: using a mini screwdriver to increase or decrease output voltage by adjusting the screw, clockwise to step up voltage and....
Has very stable output, input range is DC 4~40V and output range is DC 1.25~37V, please make sure the input voltage should be higher than output....
Press the button next to voltmeter to test input voltage or output voltage. Green LED lights on when testing output voltage.
With input and output voltage measurement error calibration function.
Wiring terminals require no soldering iron and create convenient usage..
Press the button for 1 to 4 seconds, voltmeter would be shut off when releasing your hands.

Check Stock

Texas Instruments LM311P LM311 Differential Comparator With Strobes DIP8 5 Pack

Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.

Check Stock

Valefod DC to DC High Efficiency Voltage Converter 24V to 12V 40A 480W Buck Converter DIY Power Supply Step-Down Transformer

【High-grade DC-DC Buck Converter】It adopts premium quality electronic components and waterproof (IP68) aluminum housing. Widely used for golf cart, club car, motor, speaker, GPS, car display screen, LED strip light, air-conditioner, electric fan, solar energy, DVD and other devices that requires DC 12V voltage..
【Input Voltage】 DC 24V (Input Range: 18V to 36V). A stable DC power is recommended as the input power supply, and the rated voltage supply should be within the voltage range of 18V to 36V..
【Output Voltage】DC 12V (Output Current: 40A). Please NOTE the output voltage/current/power is rated..
【Multiple Protections】Built-in over-temperature, over-current, over-voltage, output short- circuit protection to ensure your devices safely..
【Easy to DIY】Connect INPUT wires to power source, OUTPUT wires to your load device. The wiring diagram is labeled on the back of buck converter. Please don't power on before completing the circuit and connection, do not reverse the input and output interface. ※ Two INPUT wires = Red wire(positive pole) + Black wire(negative pole). ※ Two OUTPUT wires = White wire(positive pole) + Black wire(negative pole)..

Check Stock

Juried Engineering LM319N LM319 High Speed Dual Comparator Breadboard-Friendly (Pack of 5)

Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.

Check Stock