Top Output Characteristic Analyzer Reviews

Portable TinySA Spectrum Analyzer, SEESII Upgraded V0.3.1 Tiny Frequency Analyzer with Antenna SMA Male to UHF Female Cables, 100kHz to 960MHz MF/HF/VHF UHF Input, 2.8'' Touchscreen Signal Generator

【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
【Tiny Spectrum analyzers】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use..
【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These co....

Check Stock

TinySA Spectrum Analyzer,Handheld Tiny Spectrum Analyzer TinySA 2.8inch Touch Screen,Portable Frequency Analyzer 0.1MHz~ 960MHz MF/HF/VHF UHF Input, Signal Generator with Battery

【Input Frequency Range】Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz..
【2-in-1】Built-in calibration signal generator that is used for automatic self test and low input calibration.When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz..
【2.8inch Touching Display Screen】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Display resolution 320*240 pixels.Color display showing 290 scan points covering up to the full low or high frequency range.Scanning speed of over 1000 points/second using largest resolution filters..
【PC Controlled 】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.*Resistive touch contro*Jog switch control*USB serial port control.
【Package List】1x Tiny Spectrum Analyzer.

Check Stock

2023 Upgraded TinySA Ultra Spectrum Analyzer, SeeSii 4.0 Inch 100kHz to 5.3GHz Handheld Tiny Frequency Analyzer with 32Gb Card, 2-in-1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input,V0.4.5.1

✅【2023 Upgraded TinySA Ultra】:This New Version V0.4.5.1 Spectrum Analyzer is developed by Hugen, with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function, the product has a higher anti-static level and a longer service life, and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage..
✅【Frequency Range】:Compared to the tinysa (100kHz to 960MHz), the upgraded tinysa ULTRA has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz, with Ultra mode up to 0.1MHz-6GHz.Switchable resolution band pass filters for both ranges between 200Hz to 850kHz. Color display showing 450 scan points covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields..
✅【2 in 1 Multifunctional Frequency Analyzer & Signal Generator】:When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration..

Check Stock

Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function

【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life..

Check Stock

Portable tinySA Spectrum Analyzer - AURSINC Hand Held Frequency Analyzer 2021 Upgraded V0.3.1 | 100kHz to 960MHz MF/HF/VHF UHF Input | ESD Protected Function & 2.8 inch Touchscreen | Signal Generator

[2021 Upgraded Version: ESD Protection Diodes] Tinysa with latest firmware V0.3.1, the displayed version info is "ESD protected" meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life. Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.
[Frequency Range] Spectrum analyzers like the tinySA use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
[2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinySA contains all the components of....

Check Stock

Upgraded TinySA Spectrum Analyzer,Karagas Spectrum Analyzer Handheld,MF/HF/VHF Input for 0.1MHZ-350MHZ and UHF Input for 240MHZ-960MHZ,Portable Frequency Analyzer with 2.8 Inch Touch Screen V0.3.1

003cp003e◙【003cb003eBuilt-in 2-in-1 Calibration Signal Generator003c/b003e】This TinySA Spectrum Analyzer built-in calibration signal generator that is used for automatic self test and low input calibration.When not doing spectrum analyzer,it can be used as signal generator with two frequency outputs,MF/HF/VHF sinus output for 0.1MHZ-350MHz and UHF square wave output for 240MHz-960MHz.003c/p003e.
003cp003e◙【003cb003e Frequency Range003c/b003e】The 2.8-inch color touch screen displays 290 scanning points,covering the entire range of low-frequency or high-frequency ranging frequencies.0.1 MHz -350 MHz high quality IF/HF/VHF input,240 MHz -960 MHz low quality UHF input.A switchable resolution band-pass filter suitable for the range from 2.6 kHz to 640 kHz.003c/p003e.
003cp003e◙【003cb003ePC Control003c/b003e】This spectrum analyzer can be connected to PC through USB and realizes the serial over USB (CDC) protocol,which can call a large number of commands.The Windows driver will be automatically installed after connecting to the Windows computer.The Linux driver is built into the kernel.003c/p003e.
003cp003e◙【003cb003ePortable Spectrum Analyzer & ESD Protection Function003c/b003e】The latest version 3.1, new ESD protection function, insta....

Check Stock

2023 AURSINC Ultra TinySA 4” Spectrum Analyzer – Portable V0.4.5.1 100kHz-5.3GHz Frequency Analyzer | Built-in 3000mAh Battery & 32GB SD Card | RBW LNA DANL Phase Noise RF Signal Generator

2023 NEWEST TINYSA: Produced by Hugen, AURSINC ULTRA Tinysa owns high performance frequency in 100khz to 800MHz, and when in ultra mode, the analyzer can reach 5.3GHz. With new 4” touchscreen display and installed with the latest hardware system V0.4.5.1. tinysa is more professional, stable, sensitive and easy to be operated.
A Lab-grade Spectrum Analyzer: The ultra-wide range frequency can reach around 6GHz, together with the excellence of phase noise [email protected], DANL -166dBm/Hz.
In Ultra mode the input low pass filter is automatically enabled for all frequencies within the pass-band of the low pass filter (up to 750MHz). For higher frequencies the low pass filter will be bypassed and the measurement will be slower due to the multiple measurements per frequency required for the mirror and spur elimination algorithm.
Differences to the Former TinySa: The first big one is that now the default maximum frequency is 800mhz, so you no longer have to switch between low and high range,and can monitor the complete range in one sweep.
Second,In the level menu, there is the LNA, which will provide 20db of extra gain if you have very low level signal.
Lastly, RBW frequency from 200hz to 850khz which can be set to match the measurement requirements, meet ....

Check Stock

Spectrum Analyzer USB 35-4400M Signal Source RF Frequency Domain Black Analysis Tool with Tracking Source Module Industrial Supplies

RF Frequency Domain Analysis Tool. Sweep Bandwidth: 33mHz---4400mHz.
Turn on the tracking source output bandwidth 33mhz---3000mhz.
Made of fine quality material, the Spectrum Analyzer has a long service life. Small and portable, high accuracy.
Signal Source Spectrum Analyzer. Software used on the computer side: NWT4.11.09 version.
Computer operating system: Winxp, Win7, Win10.
35-4400M Signal Tracking Source Module is an RF frequency domain analysis tool.
Signal Tracking Source Module with Shell. Sweep Step: â‰¥33-68.75mHz/125Hz, 68.75-137.5mHz/250Hz, 137.5-275mHz/500Hz, 275-550mHz/1kHz,....

Check Stock

EMB Vocal Effects Processor (EQB75)

Multi-colored spectrum analyzer display shows the output of the system.
LEDs in all sliders, Two Line inputs and dual tape monitor loops.
NOTE: Refer the User Manual before use which is highly essential..

Check Stock

CardioChek Cholesterol Test Strips, 3-Count Containers by CardioChek

Must have CardioChek Analyzer (sold separately).
Includes 3 Total Cholesterol test strips, 3 lancets, 3 capillaries, and 1 memo chip.
Make sure analyzer date is set correctly, see analyzer user guide page 18..
Always use the MEMo Chip shipped with the test strips, see analyzer user guide page 10..

Check Stock

RigExpert Stick 230 Pocket Size Antenna Analyzer for 100kHz - 230MHz

The analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz..
Rapid check-out of an antenna in the field or stationary conditions..
Measuring capacitance or inductance of reactive loads..
Output signal shape: square, 0.1 to 230 MHz..

Check Stock

Blast Baseball - Swing Analyzer (Sensor) | Analyzes Swings, Tracks Metrics, Video Capture Creates Highlights, 3D Swing Tracer, App Enabled (iOS and Android Compatible), Real Time Results

MOST ACCURATE SWING ANALYZER (SENSOR) IN THE GAME – Use the industry’s most accurate swing analyzer (sensor) to build a more dynamic, well-connected and powerful softball swing..
MOST TRUSTED SWING ANALYZER (SENSOR) IN THE GAME – The #1 Swing Analyzer in the game. Trusted by more pro, college, top travel teams, coaches and players. Proven with the most swings in the game. Engineered to deliver unreal results at every level..
MOST ADVANCED SWING METRICS, INSIGHTS, FEATURES AND CONTENT IN THE GAME – Blast automatically analyzes every swing and provides impactful metrics, insights and drills for further improvement..
SMART VIDEO CAPTURE – Record and automatically clip video of each swing, with metrics overlaid. Leverage the in-app Training Center for tips and drills from expert coaches and professionals..
JUST ATTACH AND SWING – Attach the Blast swing analyzer (sensor) to any softball bat and start capturing swings anytime, anywhere. No set up or calibration necessary..
PACKAGE CONTAINS – Blast Softball swing analyzer (sensor), charger, bat attachment, and smart bat insertion key..

Check Stock

[2022 Upgraded] AURSINC NanoVNA-H4 V4.3 Vector Network Analyzer 10KHz-1.5GHz HF VHF UHF 4'' Portable Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart

✔️[2022 Upgraded Nanovna-H4 HW V4.3 ] Latest features: with latest HW 4.3 version, Nanovna-H4 is added a brand new panel plus added a new SD port for data storage(support up to 32GB memory card, not included in the package). The NanoVNA-H4 vector network analyzer is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4-inch LCD display, portable with 1950mAh battery powered or USB powered.
✔️[Improved Frequency Algorithm] The improved frequency algorithm of NanoVNA-H4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.
The metal shield is designed to reduce the external interference and improve the measurement accuracy.
✔️[Antenna Performance Measurement] The default firmware main function for NanoVNA-H4 vector network analyzer is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port ....

Check Stock