Top Output Board Reviews

MUSYSIC Professional 2 Channel 9000 Watts DJ PA Power Amplifier Signal out MU-P9K

Stereo Output Power: "2x5600W PEAK, 2x2800W Program, 2x1400W RMS @ 2Ω" "2x2800W PEAK, 2x1400W Program, 2x700W RMS @ 4Ω" "2x1400W PEAK, 2x700W Program, 2x350W RMS @ 8Ω".
Bridge Output Power: "5600W PEAK, 2800W Program, 1400W RMS @ 4Ω" "2800W PEAK, 1400W Program, 700W RMS @ 8Ω".
Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
Dual cooling fans / Connectors Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..

Check Stock

5 Axis Mach3 Stepper Motor Controller Board Breakout Board interface board For CNC Router Engraving Milling Machine

The MACH3 interface board is connected to the computer through the USB port and the LPT port. The length of the USB cable and the 25-bit LPT cable cannot exceed 1.5 meters..
1. A special high speed chip is used to process the input and output (I/O) signals. It is capable of making the machine work stably, with the features of correcting and enlarging the signals that removing the unnecessary disturb signals..
2. The computer LPT port supplies the power individually, separating from the power supply of other parts. Therefore, the computer and machine tool isolate effectively. It makes the data more secure, with further insurance of security and stability..
3. There are 5 input signals, communicating with the host computer, which are isolated by the optical coupling. Among the optical coupling isolation, the P11and P12 are high-speed, which can be used for connecting main shaft encoder, or the same demanding signal as hand wheel A, B..
4. There are 12 output signal, which is allowed to controlling output, supporting as many as 6 axis linkage. Some of the output port is reusable functinality. Meanwhile, one port only can be used as one function.5.This board only support LPT port,if your laptop does not have its own parallel port,you....

Check Stock

Terasic DE10-Lite

ANTI-INTERFERENCE & FASTER: This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed. The transmission baud rate is 9600..
PROGRAMMABLE IN LADDER LOGIC LANGUAGE: Program is written in ladder logic programming language, supports ladder logic programming language programming, downloading and monitoring, supports for GX-Developer, GX-work2..
SUPPORTS HMI CONNECTION: Supports HMI connection. Programming port is the port for program upload, download and HMI communication..
16 POINT INPUT & 16 TRANSISTOR OUTPUT: The PLC board supports 16 point input and 16 transistor output. Y0-Y3 4 channels output 100k, 200MA, externally added with freewheeling diode up to 3A and Y4-Y17 for 24V, 3A..
WIDELY USED: Widely used for fields of printing, metallurgy, food, textile, packaging, home, building materials, plastics, chemicals. The industrial control board is powered by DC 24V. Do not input AC or 220V voltage..

Check Stock

LEONARCADE Pandora Box 3D 8000 Games, WiFi Function to Add Extra Games, Pandoras Box Arcade Support 4 Players Videojuegos, Full HD Output USB/HDMI/VGA

...our name is still in ranking,in the main menu press 1P start button,will show nine squares funtion select menu.
✔✔✔ the product has the function of open high quality screen ,better adapt to the era of the high quality screen requirement you no need to buy extra video coverter,because mainboard support multiple output ports,support HD digital output 720P to any HD port display device,and VGA output support dowmload compatible to old display device.
support HD audia/AUX audia output and intergrated power amplifier output to the speaker of the mainboard(speaker output can be turned om/off in system setting).
✔✔✔ support the custom function of the arcade button and gamepad,support more than 90% of gamepad types connect to USB to play games.
support eddit your favorite 99 games at the top of the game menu.

Check Stock

HiLetgo 3pcs LM393 Rain Drops Sensor Weather Moisture Monitor Sensor Humidity Sensitivity Module Nickeled Plate 3.3-5V for Arduino

The sensor uses high quality FR-04 double-sided materials, large area of 5.0 * 4.0CM, and nickel-plated surface, with oxidation resistance,....
Comparator output, the signal clean, good waveform, strong driving ability, more than 15mA.
The raindrop board and the control board are separate, easy to lead the line.
TTL level output, TTL output valid signal is low. Drive capacity of about 100MA, direct drive relays, buzzers, small fans, and so on..

Check Stock

Voltage Boost Converter, DROK DC 8-60V to 10-120V 15A Numerical Control Step Up Voltage Current Adjustable Regulator Constant Module Output 48V 24V 12V Power Supply with LED Display Heat Sink

Realtime LED Display & Indicators --- The transformer board is designed with bright 4-digit LED to display output voltage, current at default simple mode. By manual setting to fully functional mode, the stabilizer would show more parameters, such as power and capacity. Also the board is equipped with working indicators to show real-time working status..
Data Save --- The boost converter can save up to 10 sets of parameter settings. It’s easy to save and very convenient to call out parameters at any time you would like to..
Wide Application --- The step up power converter does great for wind power, DC generators, solar panels to charge battery, and it also can be made as a boost power supply to power devices..
Notes --- 1) No big difference between input and output voltage. Otherwise the power loss will increase then the actual output may not be as what expected.
2) Actual output current is mainly decided by the load. Converter can only set a limit on output current.
3) When powering high-power appliances, please turn off the automatic output function, correctly connect the converter, and then press the "OK" button to output. After the voltag....

Check Stock

125 ATX Power Supply Breakout Board and Acrylic Case Kit, ATX Power Supply Breakout Adapter for MCU Electronic Component Adjustable Voltage Knob 24Pin

【ATX power splitter board】ATX power splitter board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V10.8V (ADJ) output voltage..
【Precise Screw Positioning】The voltage output terminal of the ATX power expansion board corresponds to each screw terminal..
【With an acrylic box】At the same time, the panel is also equipped with an acrylic box kit for easy use..
【Easy to Connect】Compatible with 3.3V: STM32 MCU, network communication equipment, such as WiFi for Bluetooth and other devices, generally for microcontrollers, and some lowpower modules, etc. 5V: for Raspberry Pi/Tinker Board/Nano Pi/USB interface, etc..
【Widely Compatible】Compatible with 9V motor drive, display drive module, etc..
12V motor drive, LED lights, vehicle equipment requiring less than 24w of power, etc..

Check Stock

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 10000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

...e: 1) As an outdoor portable power supply, the main board is powered by a lithium battery. The maximum external power supply capacity is: 5.1V. 2.5A. 2) As an indoor UPS power supply mode: the UPS power supply interface is connected to an external 5V power supply, the power supply requires 5V 2A-3A, and the maximum output current can reach 5V 3A..
4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work.
The UPS has overcharge and overcurrent protection functions: When the UPS externally outputs about 4A, the UPS will consider the external circuit to be in a short-circuit state and automatically cut off the output. The lithium battery board that comes with the UPS has an overcharge and overdischarge protection board. Prevents the battery from being overcharged and overdischarged when the external circuit is abnormal, thereby reducing the....

Check Stock

DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 50W+50W+100W (Bluetooth Amp),Bluetooth Amp

tpa3116 amplifier 100W Subwoofer Amplifier Board.
Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz.
tpa3116 2x50w amplifier board Operating voltage range: DC 12-24V(maximum voltage is no more than 24V).
This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board..
bluetooth amplifer board DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output.
Speaker impedance: bass speaker impedance: 2-8 ohm.
You can use a good switching power supply adapter, laptop switching power supply, Here is our 24V power diy amplifier.

Check Stock

Straight Shank Tool Holder, 45-46HRC Hardness 1-7mm Clamping Range 40Cr and Carbon Steel CNC Milling Extension Rod for Lathe Device(C16-ER11A-150L)

Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
Supports automatic operation including dry running and singlestep running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..

Check Stock

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.

Check Stock

MUSYSIC MU-D16K Professional 2-Channel 2x8000 Watts D-Class 1.5U Power Amplifier

2-Channel Professional D-Class Power Amplifier 2x8000 Watts Peak Output.
Stereo Output Power: "2x8000W PEAK, 2x4000W Program, 2x2000W RMS @ 2Ω" "2x4000W PEAK, 2x2000W Program, 2x1000W RMS @ 4Ω" "2x2000W PEAK, 2x1000W Program, 2x500W RMS @ 8Ω" / Bridge Output Power: "8000W PEAK, 4000W Program, 2000W RMS @ 4Ω" "4000W PEAK, 2000W Program, 1000W RMS @ 8Ω".
Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 90v-250v 50Hz.
Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protecti....

Check Stock

MUSYSIC MU-D9600 Professional 4-Channels 2x9600 Watts D-Class 1U Power Amplifier

4-Channels Professional D-Class Power Amplifier 2x9600 Watts Peak Output.
Stereo Output Power: "4x4800W PEAK, 4x2400W Program, 4x1200W RMS @ 2Ω" "4x2400W PEAK, 4x1200W Program, 4x600W RMS @ 4Ω" "4x1200W PEAK, 4x600W Program, 4x300W RMS @ 8Ω" / Bridge Output Power: "2x4800W PEAK, 2x2400W Program, 2x1200W RMS @ 4Ω" "2x2400W PEAK, 2x1200W Program, 2x600W RMS @ 8Ω".
Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 115v-230v 50/60 hz.
Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio fre....

Check Stock