Top Outer Pipe Reviews

Easy Heat AHB-112 Cold Weather Valve and Pipe Heating Cable, 12-Feet

  • Easy Heat pipe heating cable installs quickly and easily to keep water flowing.
  • Includes grounded plug, built in thermostat, and instructions.
  • Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant PVC outer jacket.
  • AHB units are activated and de-activated by an integral energy-saving thermostat.
  • Approved for rigid plastic and metal pipe.
Check Stock

TOPINCN 100PCS Greenhouse Clamps Clips Garden Buildings Tube Clip Greenhouse Frame Pipe Tube Film Clip Shading Net Rod Clip(20-White)

  • CLAMP CONNECTOR TYPE: 2-Black/ 2-White suitable pipe outer diameter:19-2MM, 22-Black/ 22-White suitable pipe outer diameter:21-23MM..
  • FUNCTION: The greenhouse clamps clip is mainly used to fix the greenhouse film, sunshade net to connect with the greenhouse steel pipe..
  • WIDE APPLICATION: Applications may include greenhouses, garden, cold frames and row covers, etc..
  • PLASTIC MATERIAL: New ABS and PC injection molding, with high strength, good toughness, good flexibility..
  • EASY TO USE: Allow quick and easy attachment of tarps, shade cloth or netting to any type of pipe. Anti rust and hard to crack, works well under both high temperature and low temperauture..
Check Stock

MECCANIXITY PVC Petrol Fuel Line Hose 3/16 x 5/16 16ft Pink for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for....
  • Fuel line hose, is in size of : 5mm/0.2-inch inner dia, 8mm/0.31-inch outer dia, 1.5mm/0.06-inch wall thickness, 5m/16ft total length.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment.....
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

Floor and Ceiling Plate Cover Split Flange Replacement and Repair Kit, Fits 1/2 Inch IPS Galvanized Pipe or 3/4 Inch Copper Pipe, Chrome Finish (Pack of 6)

  • Purpose - floor and ceiling plates also known as escutcheon plates are used to cover and close the gap between the outside diameter or the pipe and the inside diameter of the wall, floor, or ceiling opening to avoid damage and leakage..
  • Measurements - Hole diameter is 0.84 inch (21.33mm) and outside diameter is 2.83 inches (72mm) Please measure your pipe accordingly and make sure that it matches the measurements on this description..
  • Fittings - Fits 1/2 Inch IPS Galvanized Pipe (0.84 Inch Outer Diameter) or 3/4 Inch Copper Pipe (0.875 Inch Outer Diameter). Perfect for bathroom and kitchen tubular pipes..
  • Application - with its sturdy construction and chrome finish, it can be installed on a lot of things with a guarantee to match the design of the surroundings..
  • Easy Installation - Experience a hassle free installation with no expert plumbing skills or tools needed. Simply split the flange to fit the pipe circumference and close the ends together to lock and protect the pipe and wall, floor, or ceiling opening..
Check Stock

Flange Wizard 42050-T Threaded Two Hole Pins, 1/2" - 1-7/16"

  • 【Size Reference】Fit Pipe Diameter: 2.02 inch/51.5mm. Outer Diameter: 3.34 inch/85mm. Height: 0.51 inch/13mm..
  • 【Reliable Material】This flange pipe cover is made of high-quality PP plastic, high heat resistance, and corrosion resistance fit many occasions. Don't worry about the pipe collar breaking when installing. The ring shape after the installation is no deformation..
  • 【Pipe Cover Decoration Function】When the pipe passes through the wall, it leaves an unsightly surface. Can be masked with a pipe collar, to decorate making the wall and environment..
  • 【Wide Applicatons】The water pipe cover decoration can also be used to protect ladder mounting hardware and cover gaps between the concrete and the hardware..
  • 【Package Includes】1Pc x Pipe Cover Flange.
Check Stock

20 Pack Brass Pipe Screens 1/2 inch Metal Bowl Screen for Pipes

  • 【Pipe screens Material】Brass pipe screens are made of premium brass. it’s durable to use. The bowl screens edge are thickness and smooth, which could be easily to install in pipes..
  • 【Pipe screens 1/2 inch】Screen for pipes 1/2 inch- Inner diameter 0.5 inch, Outer diameter: 0.63 inch. They can fit most pipes. The pipe screen filters are good gift choice for your family and friends..
  • 【Perfectly in shape】Our pipe filters are perfectly cutting and round edges. The brass ring around the top to maintain bowl shape, right into your pipe..
  • 【Function】Pipe screen prevent clogging and stop hot ash or embers from entering the pipe. Also allow the fresh air flow freely and evenly burning.
  • 【Quality guarantee】The pipe screens are sturdy and saving your time for cleaning pipes. If any questions please contact us freely, we will response you within 24hr..
Check Stock

Honeywell Natural Gas Permasert Version 2.0 Stab Coupling - 1 CTS - PN PC50103

  • Product: 1" CTS Stab Coupling Permasert Version 2.0 P/N: PC50103.
  • Details: 1-1/8" OD, 0.090/0.099/0.102 wall.
  • Fits line size: 1" inch CTS PE Tubing (1-1/8" Outer Diameter).
  • Used on Medium Density (yellow) PE Polyethylene plastic pipe for repairs or joining lengths together. Works for Natural Gas (NG) or Propane (LPG).....
  • IMPORTANT NOTE: There are various pipe sizes described as 1 Inch. This for CTS pipe not IPS pipe. These are different pipe sizing standards, so please....
Check Stock

Set of Brass Garden Expanding Hose Joint Male Pipe Adaptor Repair with Quick Connector Fitting

  • Heavy-duty brass construction with rust proof. Follow the instructions when repairing water pipes, and they do not fit for thicker outer hose cloth expandable hoses..
  • Pipe joint diameter is 10mm/0.39″. Note: The outer diameter of the hose should not exceed 0.47”(11.8mm). And these pipe fittings are quick connector system, not 3/4″ thread..
  • Make quick, effective repairs to an expandable hoses. Suitable for most quick male end connectors (outer diameter 16mm), secure Fit, no-Leak connection. Not 3/4″ thread..
  • They can be use garden hose mender, end hoses male mender, end hoses female mender..
  • Include: 2 x brass female quick connectors, 1 double male quick connector.
Check Stock

Beduan Pneumatic Tubing Pipe 5/16

  • Wide range for working temperature and pressure.
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃–80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Excellent chemical properties, Minimal pressure loss.
  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 5/16″ (Outer diameter) , 3/16″ (Inner diameter). Package Total Length:39.4 Feet (12meters).
Check Stock

PATIKIL Thermowell Pipe Immersion Well 1/4 ID 9/32 OD 20 Stainless Steel 304 for Weldless Thermowell Brewing Thermometer 2pcs

  • Thermowell pipe is mainly used for sensor protection pipe. Temperature sensors are placed in thermowell pipes, which can be used to measure temperatures, such as water tank temperature measurement and temperature measurement during the brewing.
  • Thermowell pipe, is in size of : 6mm/0.24-inch inner dia, 7mm/0.28-inch outer dia, 500mm/20-inch length.
  • 304 stainless steel material, sturdy and durable, not easy to rust.
  • Easy to use, easy to install and operate.
  • Steps of installation: 1. Choose the right size thermowell pipe.
  • 2. Remove the thermowell pipe to be replaced.
  • Please pay attention to choose the appropriate size of thermowell pipe, especially the diameter and length of the thermowell pipe.
Check Stock

Matchpipe Handcrafted 6 Inch long Pearwood Cone shaped Bowl Pipe ebony stem

  • SIZE: Length-6 inch, Bowl Height outer side -1 inch, Outside diameter -1 inch approximately, Chamber depth-1 inch approximately.
  • EXCLUSIVELY HANDMADE: This pipe is beautiful with a fine carved stone bowl and the ebony stem. This is a modern Unique design.
  • WOOD STONE PIPE: Bowl is always cool as its made of stone and this wood and stone combination makes this pipe unique Remember stone pipes can break please handle with care. The bowl is very delicate, it needs to be handle with care.
  • LOW MAINTENANCE- This tobacco pipe is easily disassembled in order to clean it with ordinary cotton cleaners. Wooden pipes can last forever if you keep them clean and polish them regularly.
  • GREAT GIFT IDEA FOR PIPE LOVERS: Perfect to be as a gift for Father's Day, Christmas Day, Thanksgiving Day, Teacher's Day and all pipe lovers. Listing includes pipe only and not stand..
Check Stock

9.85-Foot/3m Length Stretchy 1/4 Inch ID Fuel Line+20pcs 1/3\ ID Hose Clamps for Lawn Mower Tractor Kawasaki Kohler for Briggs & Stratton motorcycle snow blowers Small Engines

  • Product name: ID Fuel Line Kit with 10PCS 2/5" (11mm) ID Hose Clamps..
  • Thickened pipe wall design: The fuel pipe is divided into three levels: inner pipe, middle layer and outer pipe. The inner diameter is about 1/4" (6mm), the outer diameter is about 0.53" (13.5mm) and the wall thickness is about 0.16" (4mm)..
  • Product material: the inner tube is made of rubber, and the middle layer is made of fiber thread. The hose clamp is made of spring steel.
  • Product advantages: comfortable appearance, smooth and flat.
  • high and low temperature resistance, wear-resistant rubber fiber layer can be woven, can make the hose withstand greater pressure, used for connection, fixation, and ensure its stability..
  • Scope of application: suitable for small engines: tractors, lawn mowers, snow machines, power equipment, etc..
Check Stock

CG2-11 PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING PIPE BEVELING ​MACHINE

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft steel t....
Check Stock