EXP VALVES/ORIF TUBE - FIXED ORIFICE TUBE
- See Description For Full List of Vehicles This Item Fits.
Top Orifice Flange Reviews
TSI Supercool 92311 Deluxe Orifice Tube Service Kit
- Five piece universal kit in a custom molded case.
- Includes all the tools you need to remove and install any style orifice tube.
- Consists of an auger point shaft, nut and arbor, GM puller, extension and orifice tube puller.
- Replacing orifice tubes should go hand-in-hand with compressor replacement.
- Supercool offers one of the most complete A/C maintenance programs in the marketplace.
AC Orifice Tube Removal Tool Fits for GM Vehicles Car Air Conditioning Orifice Tube Remover Installer Tools
- Product Function: AC orifice tube removal tool fits for most GM vehicles. It is used to disassemble the damaged hole pipe auger and turn it into hole pipes for grasping, so that the nut exerts a uniform and stable pressure to avoid damage the small plastic ears on the tube, make replacement and maintenance easier.
- Material: GUZIKO orifice tube removal tool is made of high-quality metal, which is sturdy and durable and can be used for a long time.
- Easy to Use: The tool can be slid into and locked on the tabs on the orifice with a slight twist, and then the old orifice can be pulled and rotated until it can come out. It saves time trying to use needle-nose pliers to enter a small area to pull out the old orifice tube. Don't worry about breaking the end with pliers.
- Notes: Sometimes you have to add a little bit of heat on the pipe to make the other accessories to loosen up a little bit. It's better to apply some heat the heat down and then start pulling.
- After-sale Service: We will offer a 12 months service, if you have any problems in use, Please contact us at any time, we will respond within 12 hours.
Ashford Traditional Single Drive/Unfinished Wheel
- The world’s most popular spinning wheel for 70 years. Many optional accessories make this an extremely versatile wheel..
- Includes: 4 Standard Single Drive Bobbins, Vertical Lazy Kate, Threading Hook, and Learn to Spin Booklet..
- Single drive ratios 7, 9, 12, 17:1. Orifice: 3/8 inch (1 cm). Orifice: 3/8 inch (1 cm). Orifice Height: 27 1/4 inches (69 cm). Wheel diameter 22 inches (56cm). Weight: 17.5 lb (8 kg)..
- Made from New Zealand Silver Beech (unfinished). Assemble required..
Tool Daily Pressure Washer Sand Blasting Kit, Wet Sandblaster Attachment, 2500 PSI, 1/4 Inch Quick Connect
- Wet sand blaster for pressure washer is suction-fed injection of sand into water system..
- Working pressure of pressure washer sand blaster attachment is up to 2500 PSI. Orifice 2.5. Max flow rate: 2 GPM. Temperature is up to 140°F/60℃. Please check image 6 to choose the size of orifice. If you need orifice 3.5 or orifice 3.0, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, 5000 PSI”..
- The pressure washer sand blasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 10’’ sand wand (sand input) and permanent nozzle (output)..
- Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
- Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
GasOne Head Banjo High Pressure Propane Burner 10 in Heavy Duty
- Includes - Burner Head, Orifice, Air Controller & 0-20 PSI adjustable High Pressure Regulator and Hose.
- BRASS FITTING ORIFICE BLOCK - Includes Brass Fitting Orifice block & Air shutter and Spring.
- HEAT RESISTANT - Cast Iron will not melt easily compared to aluminum construction, Has high heat tolerance.
- HIGH HEAT OUTPUT - With 0-20 PSI Regulator it produces up to 200, 000 BTU.
XZT 3000psi(s16)-m22(Female) Pressure Washer Sewer Drain Hose,Sewer Jetter Hose Kit (50FT)
- Sewer Nozzle Outside Diameter Max.: 0.76″( 19.2mm).
- orifice: 1 Front(orifice is 1mm) 6 Back(orifice is 0.7mm).
- Connector: compatible most pressure brand.
PWACCS Sewer Jetter Nozzle for Pressure Washer, Stainless Steel Drain Cleaning Tips for Power Washer, 3 Pieces, Button Nose Jet Nozzle, Rotating Flat Jetting Nozzle and Drain Jet Hose Nozzle, 5000 psi
- Wild Application: The sewer jetter head kit has been widely used not only in industrials but also in daily lives. It is ideal to be used in cleaning kitchen sink, toilet, industrial pipe, indoor and outdoor plumbing..
- Premium Material: The pressure washer sewer drain jet nozzle kit is made of durable stainless steel throughout, which is naturally immune to wear, corrosion, rust and oil. A best choice to accompany your whole life..
- Button Nose Jet Nozzle: Orifice size is 4.0. This kind of jet nozzle is used to clean blockage and debris through one front spray orifice and 3 rear orifices..
- Drain Jet Hose Nozzle: Orifice size is 6.5. Compared to button nose jet nozzle, this tip has more orifices in quantity (1 in front and 6 in rear), which means it need more power to maintain the same pressure and speed. But it can obviously provide more efficient cleaning..
- Rotating Flat Jetting Nozzle: Orifice size is 4.5. This jetter nozzle only have 3 backward rotating spray. The location of each orifice make it spin when water runs. It is more destructive to blockages than any other nozzles.
FireDisc - Fire Power Orifice - Backyard Plow Disc Cooker | Portable Propane Outdoor Camping Grill
- Looking for more power? Get the FirePower Orifice.
- Adds the extra firepower you need for high-powered, boil-in-minutes cooking. Ideal for large boils or frying of crawfish and shrimp.
- Regular power orifice should suffice for most recipes.
- Heats food faster for larger groups and volumes.
- The FireDisc FirePower Orifice is only compatible with FireDisc Cookers..
- Can heat the FireDisc to boil and fry in just minutes.
Robinair 10986 Orifice Tube Service Kit for Ford and General Motors vehicles
- Automotive A/C orifice tube remover tool kit allows removal of orifice tubes before flushing.
- Speeds A/C service by removing the build-up of particulates on the orifice screen and restrictions that slow the flushing process.
- The basic tool works on General Motors and Ford vehicles and comes with additional adapters for specific applications.
- Ford: extender body for 1985 and newer models.
- General Motors: 1989-91 GM 'J', 'L', and 'N' car adapter, and 1991 and newer 'C' and 'K' series truck adapter (for trucks with No. 3096068 orifices).
Replacement for LG Kenmore Dryer LP Gas Conversion Kit 383EEL3002D AP5204371 PS3522300
- Dryer LP conversion kit 383EEL3002D converts a natural gas dryer to operate on liquid propane.
- The LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer.
- Dryer LP conversion kit 383EEL3002D is an part that fits some gas dryers in these series: Kenmore 796.
- LG 383EEL3002D Dryer LP Gas Converter. for use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RN1317TS. LG 383EEL3002D Dryer LP Gas Converter. For use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RN1317TS. Refer to your manual to ensure ordering the correct, compatible part.
- Dryer LP conversion kit 383EEL3002D is an equipment manufacturer part that fits some gas dryers in these series: Kenmore 796.
- and LG DLG and DLGX. Dryer LP conversion kit 383EEL3002D converts a natural gas dryer to operate on liquid propane. The LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer. A qualified technician should install this LP conversion kit because of the risk of explosion or fire if the kit is installed in.
Tool Daily Pressure Washer Sandblasting Kit Wet Sandblaster Attachment 5000 PSI 1/4 Inch Quick Disconnect Orifice 3.0
- Orifice 3.0. Minimum Flow Rate: 2.5 GPM. Minimum Pressure: 2700 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5,....
- The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input)....
- Replacment Nozzles are available. Product "Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sandblaster Attachment, 5000 PSI, 2-Pack".....
- Application: pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
- Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
RIDGE WASHER 1.1 mm Foam Cannon Orifice Nozzle, Universal Thread Tips for Snow Foam Lance, 2-Pack
- Universal orifice nozzle to generate thick foam inside foam cannon, 2-pack.
- Orifice size 1.1 mm, Male NPT screw fitting, about 1/4 inch. Working Pressure is up to 3000 PSI..
- If foam cannon works not very well as before, maybe orifice tip damaged or blocked. You can replace with new one and it will recover..
- Include 2 pieces of high replacement foam generator nozzles for snow foam lance. Made of brass, work durably in the foam cannon..
- If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..