Standards: BS EN ISO 8503-5, BS 7079-C5, SSPC-SP5, SP 6, SP 10, SP11-87T, ASTM D 4417-C, NACE RP 0287-95, ISO 8503-5.
Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs..
The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles..
Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc..
Pacific Image PrimeFilm XA Plus Film Scanner. 35mm Film & Slide Scanner. Faster Scan Speed. Auto Roll Film and Film Strip Scanning. Auto Focus. 10000 dpi/48-bit Output. 4.2 Dynamic Range. Mac/Pc.
AUTO ROLL FILM & FILMSTRIP SCANNING - With the uniquely designed auto film load, XA Plus allows users to insert a film strip or a full roll of film uncut for automated batch scanning from 3-40 frames.
AUTO FOCUS - With the built in hardware design of automatic lifted platform at the front of the scanner, XA Plus adjusts focus automatically for optimum sharpness..
10,000 DPI RESOLUTION WITH TRUE COLOR - Different from the majority of DSLR or CMOS scanner using Area CMOS Bayer pattern to simulate RGB, all film scanners from Pacific Image use true RGB linear array CCD to scan, which helps PrimeFilm XA Plus to provides high quality scanning capability of 135 slide and film..
ENHANCED SCANNING SPEED - For scanning negative film, PrimeFilm XA Plus offer 1.7x faster scan speed than the previous PrimeFilm XAs with the same resolution of 5,000 dpi..
EASY TO USE - With the film viewing window and easy access buttons, users can see the whole scanning process and experience a faster scanning workflow..
Happybuy Greenhouse Film 24 x 50 ft, Greenhouse Polyethylene Film 6 Mil Thickness, Greenhouse Plastic Greenhouse Clear Plastic Film UV Resistant, Polyethylene Film Keep Warming, Superior Strength
High-Quality Polyethylene Material: The greenhouse film is made of high-quality polyethylene with 6 mil thickness, tear-resistant and against UV radiation for long-lasting uses..
24x50 Ft Greenhouse Film: The greenhouse polyethylene film is 24' wide and 50' long. The tough polyethylene film can unfold easily and quickly and can be folded into rolls..
Maintain Warm Temperature: The greenhouse plastic is designed against UV radiation in hot temperatures and can keep warm in cold temperatures. These cover films also reduce the absorption of dust for optimum plant growth..
Superior Strength & Toughness: The greenhouse polyethylene film features superior strength and toughness, corrosion and tear-resistant, UV protected, and weather resistant..
Multi-Purpose Application: The greenhouse cover is perfect for industrial, residential, construction, masonry, agriculture, and landscaping projects for a protective barrier. It is great for a DIY lawn slip and slide or used as a protective cover..
Press-O-Film Coarse Minus Grade (0.5-1.0 mils / 12-25 microns) Replica Tape, Roll
Standards: BS EN ISO 8503-5, BS 7079-C5, SSPC-SP5, SP 6, SP 10, SP11-87T, ASTM D 4417-C, NACE RP 0287-95, ISO 8503-5.
Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs..
The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles..
Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc..
Samsill Economy Transparent Printer Sheets Projector Film Clear Transparency Film for Laser Jet Printers 8.5 x 11 Inch Sheets - Black Image Only Box of 100 Sheets
Packed for Extra Value – Bulk printable transparency paper with 100 sheets packed for large jobs and additional value.
Durable Solution – 4 mil / .1mm thick PET provides optimum performance and each acetate sheet of transparency film is designed for durability at....
Laser Printer Compatible – Print directly on the film - For best results print on transparency setting or low temp setting (60-90 Degrees F) on....
High Speed Production – No more slow and tiring hand writing on transparencies. Simply use the film instead of paper for fast and clean printing.
Professional Look and Feel – No more illegible handwriting or wasted hours creating presentations - The clear finish and black laser jet printing....
Standards: BS EN ISO 8503-5, BS 7079-C5, SSPC-SP5, SP 6, SP 10, SP11-87T, ASTM D 4417-C, NACE RP 0287-95, ISO 8503-5.
Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs..
The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles..
Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc..
Press-O-Film X-Coarse Grade (1.5-4.5 mils / 38-115 microns), Roll
Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs.
The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles.
Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc.
Easy to use, remove the protective paper from the tape and place firmly on the blasted surface. Apply moderate pressure with the Burnishing Tool over the circular cut-out in the tape. Remove the tape. The replica is now ready for measurement using the Snap Gauge.
Adjustable Film Coating Applicator 0-3500μm 55mm Film Coater with Micrometer Wet Film Preparation Device High-Precision Professional
Standards: BS EN ISO 8503-5, BS 7079-C5, SSPC-SP5, SP 6, SP 10, SP11-87T, ASTM D 4417-C, NACE RP 0287-95, ISO 8503-5.
Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs..
The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles..
Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc..
CGOLDENWALL CS-1 Tablet Friability Tester/CS-1 friability test Instrument 110V/ 220V 2 Cylinder Number Speed: 25 rev/min
Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs.
The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles.
Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc.
Easy to use, remove the protective paper from the tape and place firmly on the blasted surface. Apply moderate pressure with the Burnishing Tool over the circular cut-out in the tape. Remove the tape. The replica is now ready for measurement using the Snap Gauge.