Top Open ended Reviews

Muteki 31886U Chrome Blue 12mm x 1.5mm Open End Lightweight Spline Drive Lug Nut Set with Key, (Set of 20)

  • 21 millimeter length and 20 millimeter outer diameter with open ended spline drive design.
  • Open ended Muteki lug nuts weigh a mere 25 grams each.
  • 21mm length 20mm outer diameter with open ended spline drive design.
Check Stock

Williams WS-1168RCF 8-Piece Reversible Flex Head Ratcheting Combination Wrench Set

  • Black industrial finish and 12 point box and open end wrench.
  • Size range of 5/16 to 2-Inch, 26 piece set, Super combo wrench set.
  • SUPERCOMBO open end has specially designed grooves that direct wrench force away from fastener corners SUPERTORQUE box opening design allows application of higher torque without rounding or deforming hex fastener points..
  • Box and open end openings are identical Black Industrial Finish with SUPERCOMBO Open End and SUPERTORQUE Box End No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points..
  • Meets or exceeds aerospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application Meets or exceeds aerospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application..
Check Stock

Snap-on 3/8in Ratchet, Sealed Head, Dual 80 Technology - F80

  • Black industrial finish and 12 point box and open end wrench.
  • Size range of 5/16 to 2-Inch, 26 piece set, Super combo wrench set.
  • SUPERCOMBO open end has specially designed grooves that direct wrench force away from fastener corners SUPERTORQUE box opening design allows application of higher torque without rounding or deforming hex fastener points..
  • Box and open end openings are identical Black Industrial Finish with SUPERCOMBO Open End and SUPERTORQUE Box End No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points..
  • Meets or exceeds aerospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application Meets or exceeds aerospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application..
Check Stock

Snap-On 7 Piece 12-Point SAE Reversible Ratcheting Combination Wrench Set (3/8–3/4"), Part #SOXRR707

  • Black industrial finish and 12 point box and open end wrench.
  • Size range of 5/16 to 2-Inch, 26 piece set, Super combo wrench set.
  • SUPERCOMBO open end has specially designed grooves that direct wrench force away from fastener corners SUPERTORQUE box opening design allows application of higher torque without rounding or deforming hex fastener points..
  • Box and open end openings are identical Black Industrial Finish with SUPERCOMBO Open End and SUPERTORQUE Box End No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points..
  • Meets or exceeds aerospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application Meets or exceeds aerospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application..
Check Stock

Utoolmart Flare Nut Wrench, 8mm x 10mm Metric Double Open End, 1Pcs

  • 【DOUBLE OPEN END】- 8mm x 10mm / 0.31 x 0.39-inch..
  • 【MATERIAL】- Flare Nut Wrench is made of high carbon steel for strength and durability..
  • 【SURFACE TREATMENT】- Fully Polished and Chrome Coated support best Anti-Rusting Surface..
  • 【OFFSET END】- 15 degree offset open end allows an increased range of arc swing in tight spaces..
  • 【Widely Use】- Double Open End Nut Wrench is Applied in DIY hand-making, automotive repairs, household maintenance, and most general repairs..
Check Stock

Instant Zipper- Set of 4 Replacement Zippers in Gold

  • REPAIR MOST ZIPPERS EASILY: apparel, backpacks, tents, boats, marine, sleeping bags, purses, jacket, pants, bag, luggage, wetsuits, and more. Works on open-end, closed-end, invisible, and watertight zippers..
  • NO TOOLS OR SEWING REQUIRED: Fix zip isn’t your average zipper repair kit. It’s a replacement zipper slider that you can install without tools or sewing. Anyone can do it! You'll have your zipper handle in best condition in no time!.
  • DURABLE, QUALITY BUILD: Stop replacing your zippers over and over! These top-quality black nickel replacement zippers are made strong, so they won't need to be replaced again. When someone pulls on the....
Check Stock

Tanning Bed Struts Shock Piston Montego Bay 2400/2600 500N

  • Tanning Bed Struts Gas Spring, Shock Set of Two - NEW!.
  • 19 1/8 center to center open 154 1/8" center to center when closed.
  • 20" end to end open 15 end to end closed.
Check Stock

Open End Basket Holding Clips to Hold Wire Baskets on Gondola Shelf Upright, Left & Right Clips, 5 Pairs

  • Use these open end basket clips to hang wire open end baskets on your gondola shelving units. Note: These will only fit on Madix or lozier gondola shelf uprights..
  • These clips are sold in pairs. Each unit consists of one left clip and one right clip. Simply place the clips into the hole on your gondola shelf upright (also known as uprite). Note: These will only fit on Madix or lozier gondola shelf uprights..
  • They are made out of an extremely heavy duty metal and come in a zinc finish which look great when paired with chrome wire open end baskets..
  • The clips can hold up to 500 lb per 2 clips, however most open end baskets have lower weight limits. Make sure to verify the weight capacity of your baskets prior to loading the shelf..
Check Stock

Tri-Square Big Wrench

  • ►【EXCELLENT QUALITY】: Forged from high quality chrome vanadium steel,high hardness, high torque(Torque test up to 20,000 times), good toughness and longer service life.Mirror polish treatment on the wrench surface, beautiful and not easy to rust..
  • ►【72-TOOTH DESIGN】:The 72-tooth design of the precision ratchet wheel requires only 5°working swing arc,can meet your work needs..
  • ►【180°ROATING HEAD】: Flexible head ratchet design, which can be switched in clockwise and counterclockwise directions, making it easier to apply force..
  • ►【OPEN-END DESIGN】：Our appearance design obtained US patent.One end is an open-end wrench and the other end is a open-end and flexible-head ratchet wrench,Meet your different needs.Used to tighten hexagon head, square head bolts or nuts, usually used for assembly and maintenance operations of mechanical equipment, is a tool for machinery, auto repair and other industries..
  • ►【9 METRIC WRENCHES and BOX】:8MM 9MM 10MM 11MM 12MM 13MM 14MM 15MM 17MM.This product is also equipped with a sturdy tool box, which is convenient for you to carry and store tools..
Check Stock

TEKTON Combination Wrench Set, 4-Piece (1-1/16-1-1/4 in.) | WCB90103

  • No Skipped Sizes: this 4-piece set contains a full range of wrenches from 1-1/16 inch to 1-1/4 inch with no skipped sizes.
  • Angled Open End: to reduce the working swing arc in tight spaces, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.
  • Offset Box End: the box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions.
  • 12-Point Box End: a 12-point box end doubles the access angles of a 6-point box end.
  • Corrosion Resistant Finish: polished chrome finish easily wipes clean and protects wrenches from corrosion.
Check Stock

GEARWRENCH 44 Pc Master Combination Wrench Set Metric/SAE - 81919

  • Gearwrench's off-corner loading design has an open end, stronger grip, reduces fastener rounding, and has up to 25% more torque.
  • Gearwrench's Wrench Set has an off-corner loading design on box end for better grip and reduced fastener rounding.
Check Stock

TEKTON Combination Wrench Set, 19-Piece (6-24 mm) - Rack | WCB91202

  • Includes 19-pc. metric combination wrenches: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
  • No Skipped Sizes: this 19-piece set contains a full range of wrenches from 1/4 inch to 1-1/4 inch.
  • Angled Open End: to reduce the working swing arc in tight spaces, the wrenches' open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.
  • Offset Box End: the wrenches' box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions.
  • Corrosion Resistant Finish: polished chrome finish easily wipes clean and protects wrenches from corrosion.
  • 12-Point Box End: a 12-point box end doubles the access angles of a 6-point box end.
Check Stock

GEARWRENCH Open End Ratcheting Metric Wrench Set 12 Pc., 12 Point - 85597

  • Combines the speed of ratcheting with the access of the open end wrench..
  • Open end ratcheting mechanism allows you to turn nuts and bolts without taking the wrench off the fastener..
  • Ratcheting box-end needs as little as 5 degrees to move fastener vs. 30 degrees for standard box end..
Check Stock