Top One Touch In Fittings Reviews

SavvyCraft 4 Bow Bimini Replacement Top Canvas Cover4 Bow 96\ L 54\-60\ W Black Color

*Upgraded Bimini Top Parts - Casting from marine grade 316stainless steel , this external eye ends for bimini top fittings works for 7/8'' OD round tubes. Upgraded outside eye ends that stands up over time is a perfect choice to replace your plastic, nylon or broken fittings..
*Heavy Duty Stainless Steel - Stainless eye ends are well-built and highly polished for ultimate using. They are corrosion resistant, anti-rust, providing more durable solution for salty water environment..
*Easy to Install - Marine boat fittings are easy to assemble and install.Simply assemble jaw slide with eye ends to join the bimini top frame, then tighten screws to secure the inserted poles in place..
*Durable Design - 7/8’’ external eye end has shining polished looking and smooth touch, combining the modern design . Bringing this marine hardware for your lovely bimini will definitely surprise you for its outstanding product experience..
*Choose Right Size - Fits for 7/8'' OD round tube. One screw on each fitting measured 1/4''. the detail size refer to the left picture.Perfect replacement for marine hardware, widely used for boating, kayak, canoe, yacht,etc..

Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.

Check Stock

CIA 6221EWBL Motionsense Wave Touchless Single Handle Bathroom Sink Faucet

BOLD STATEMENT: Matte Black finish adds a touch of sophistication to any room.
ONE SENSOR: featuring single-sensor touchless activation, MotionSense wave allows you to easily turn water on and off with the wave of a hand. No need to touch the faucet with dirty or wet hands..
BATTERIES INCLUDED: Includes 3 AA Batteries, eliminating the need for a dedicated outlet (optional AC power available).
WATERSENSE CERTIFIED: Meets EPA WaterSense criteria to conserve water without sacrificing performance.
FLEXIBLE DESIGN: Designed to be installed through 1 or 3 holes.
SUPPLY LINES: Flexible supply lines with 3/8" compression fittings.
COORDINATING COLLECTION: Coordinates with Moen faucets and accessories in the Cia Collection.

Check Stock

Grease Gun Coupler, Locks onto Metric and SAE Zerk Grease Fittings, Positive Lock, Fits All 1/8” NPT Type Grease Guns, Quick Disconnect Lever, 10,000 PSI High Pressure, by Tech Team

Positive locking quick disconnect for secure attachment and easy release of zerk fittings..
The grease gun coupler allows you to put grease into zerks that are difficult to get at and includes an 8” high pressure hose for reaching into tight areas. Flex tube for increased reach..
The coupler has a 1/8” NPT thread that is compatible with all types of grease guns manual, electric, and pneumatic..
Zerk fittings included to replace clogged, broken, or damaged fittings..
Includes one (1) positive lock quick disconnect clamp, one (1) 200 mm flex extension tube, two (2) 90-degree grease fittings, two (2) 45-degree grease fittings, two (2) straight grease fittings, one (1) precision nozzle..

Check Stock

Jienk 40PCS Straight Push Connectors, Quick Release Pneumatic Air Line Fittings for 1/4 5/16 3/8 1/2 Tube Emergency Repair Your Leaking Air Hose

【Durable】This fitting has a strong PBT housing with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
【Push Lock】 Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently. 360°rotation, after installation, the tube direction can be changed easily..
【Wildly Application】 Working Temperature: 32～140°F. This Straight Push Connectors kit is most commonly used in the field for low-pressure hydraulic and pneumatic systems such as general industrial maintenance and automotive assembly,as well as moving parts such as air brake, air compressor and air ride..
【Flexibility】This combo concluded four different sizes of straight air line fittings(1/4,5/16,3/8,1/2), save you from varies emergency need, help you to repair your leaking air line..

Check Stock

Jienk 5Pcs Bulkhead Union 3/8\ x 3/8\ Tube OD Push to Connect Tube Fitting, PMM-3/8 Pneumatic Quick Connect Air Fitting

【Bulkhead Design】Pneumatic Fittings is mainly used for air piping, pneumatic tools, do not need joint tools can realize the pipeline connecting or disconnecting the link. Excellent choice for through wall application..
【Durable】The body made of strong thermoplastic (PBT) housings and the ferrule adopts zinc alloy. Operating pressure 0~145 Psi, high pressure resistance, corrosion resistance and a long service life..
【Push Lock】Quick connect fittings easy to install and remove. Just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
【Convenience】360°rotation. After installation, the tube direction can be changed easily. Help a lot with the alignment when piping the air line..
【Application】Working temperature range: 32～140°F. Most commonly used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, General Industrial, Maintenance and Automotive Assembly, Aircraft Controls, Printing, Packaging and Textile. As well as moving parts such as air ride, air horns and air suspension system..

Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....

Check Stock

Delta Faucet Trinsic Touch Bar Faucet Brushed Nickel, Bar Sink Faucet Single Hole, Wet Bar Faucets with Pull Down Sprayer, Prep Sink Faucet, Delta Touch2O Technology, Arctic Stainless 9959T-AR-DST

The design was inspired by the sleek elegance of modern European design.
A sleek sophistication in the kitchen for both style and functionality. Spout Length- 6-1/2 inch. Deck to Outlet-7 inch.62 inch long hose provides outstanding reach.
Touch activated faucet featuring Touch2O Technology. Turns on and off with just a touch anywhere on the spout or handle.
1 or 3-hole 8 inch installation. Flow Rate is 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa. Fittings Type: 3/8 inches compression fittings. Deck Thickness: 2.5 inches.
Pull-down wand operates in an aerated or spray mode via ergonomic buttons.

Check Stock

Moen 87044SRS Whitmore One-Handle High Arc Kitchen Faucet, Spot Resist Stainless

LASTS 2X LONGER: Patented DIAMOND Seal Technology reduces leak points and lasts twice as long as the industry standard—ensuring leak-free operation for the life of the kitchen faucet (Industry standard is based on ASME A112.18.1 of 500,000 cycles).
MAGNETIC DOCKING: MagnaTite Docking uses a powerful magnet to snap your kitchen sprayer into place so it stays docked and doesn’t droop over time like other kitchen faucets.
EASY INSTALLATION: Designed to fit 2-hole, 4-in. configurations. Everything you need is together in one box, including InnoFlex PEX supply lines that are integrated into the faucet for one less leak point.
EASY TO CLEAN. Delta kitchen faucets with Touch-Clean spray holes allow you to quickly and easily wipe away calcium and lime build-up with a touch of a finger, so no need to soak or use chemical cleaners.
Pull-down spray wand features a 59-Inch hose providing a 20-Inch reach.
High-arc spout swivels 360° for complete sink access.
32-in (minimum) Innoflex supply lines with 3/8-in compression fittings.
LIFETIME LIMITED WARRANTY: You can install with confidence, knowing this kitchen faucet is backed by Delta Faucet's Lifetime Limited Warranty.

Check Stock

Jienk 5PCS Pneumatic Male Straight 1/2\ Tube OD x 3/8\ NPT Thread Push to Connect Air Fittings, Quick Connector for Air Ride Air Horn Air Compressor

【Durable】This fitting has nickel plated brass body with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
【Convenience】360°rotation, after installation, the tube direction can be changed easily. This fittings have hexagonal body allowing tightening with wrench, additionally can be screwed with Allen tool, which is especially convenient where there is limited access to installation place..
【Wildly Application】 Working Temperature: 32～140°F. This male straight quick release air fitting is most used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, Industrial, Automotive Assembly, Printing, Packaging, Aircraft Controls, Textile. As well as moving parts such as cylinders, air bag and air suspension..

Check Stock

Heater Hose Adapeter, Aluminum Alloy Heater Hose Fitting 90 Degree Connector 1/2in NPT to 5/8in Hose Barb

1.Feature : Heater Hose Adapeter built to meet standard specification, strictly follow factory quality control.Give that nice touch to your other engine accessories..
2.Outstanding performance : Precision manufacturing ensure stable performance.Triple chrome plated, mirror like finish, smooth and durable..
3.Premium quality : Machined out of one solid piece of aluminum and then chrome plated, super light weight compared to the oem fittings, it will never rust.so that make sure the Heater Hose Fitting work well all the time..
4.Easy to install : The Heater Hose Fitting is easy to install, no modification is required.save time and effort.convenient for using.You can replace the old or broken one directly..
5.Purchase service : We value the shopping experience and satisfaction of each customer, so we provide technical support. If the product install or quality have any problem, please contact us in time.We will solve it as soon as possible..

Check Stock

Legines Brass Pipe Fitting Hex Bushing 3/8 NPT Male to 1/4 NPT Female 1200psi 2pcs

Hex bushing for connecting two pipes with different diameters.
3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends.
Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250....
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

NOVINO Grease Zerk Fitting Tools Fits 1/4"-28 SAE,1/8"-NPT, M10x1 M8x1 and Grease Zerk Fittings with hex Size 3/8" 5/16" 7/16",Multi-Tool for Remove Install Rethread Damaged Broken Zerk Grease Fitting

2 set Heavy-Duty alloy steel galvanize grease zerk tool. One fits for 1/8"-NPT PTF grease zerk fitting, M10x1 and grease zerk fittings with hex size 3/8" (9.5mm) & 7/16" (11mm). One fits for Fits 1/4"-28 SAE, M8x1 and Zerk fittings with hex size 5/16" (7.85mm) & 3/8" (9.5mm).
A must have grease fitting multi-tool: 4 tools in one grease zerk kit---install,remove,re-tap holes( repair 1/8"& 1/4"-28 tap thread) and maintain zerk grease fittings .Make job more easier and save time..
Function 1---Remover and Installer. The silver sockets are grease fitting removal & install tool,used to removal damaged broken grease fittings OR install straight and angle grease zerk fittings( 30, 45, 65, 90 degree angles ).
Function 2---Thread Cleaner and Restorer.The black taps on the cross ends are grease fitting cleaning tool ,designed to clean out the threads of a clogged fitting and retreading repair correct fitting thread..
Wide use:Our grease zerk fitting tool kit is designed to meet requirements on tractor/loader/lawn mower/excavator/rotary ....

Check Stock