Top Oil impregnated Bushings Reviews

ACDelco Gold 336-1824 Starter, Remanufactured

  • Remanufactured using consistent quality processes.
  • Starters have new bronze sintered and oil-impregnated armature bushings.
  • Solenoid contacts are new with copper terminals and plated hardware.
  • Performance-tested and inspected to ensure they meet your expectations for quality design and component specifications.
Check Stock

Mile Marker 459 Premium Rear Manual Locking Hub Set - 459SS

  • Replaces original equipment automatic or manually-locking hubs.
  • Brass bushings are oil-impregnated for longer life.
  • Raised center knob allows easier engagement by hand with just 1/4 turn.
  • Features detent ball for positive locking.
  • All components made from reinforced, heat-treated steel.
Check Stock

American Bronze, 3/8 x 1/2 x 1/4 Sleeve Bearing, Bronze Bushing Flange, Made in the USA

  • AMERICAN BRONZE: high quality self-lubricating bronze bushings, MADE IN THE USA.
  • Dimensions = .377 x .502 x .250 x .625 x .063 (ID x OD x OAL x FOD x FTH).
  • Material = Bronze SAE 841 (90% copper, 10% tin), Oil impregnated with 30w oil.
  • Properties = Self lubricating for long lasting smooth operation and high durability.
  • Operation = light to moderate load at high speed (rpms).
Check Stock

The Hillman Group 58078 Sleeve Bearing, Bronze 1/4 X 3/8 X 1-Inch, 5-Pack

  • Sleeve design provides a level surface around the surface of the bearing.
  • Oil-impregnated construction provides a low-friction surface.
  • These nylon strain relief bushings for flat electrical cables feature a 0.437" hole diameter and nominal wire size of 3P4.
Check Stock

Max Motosports 5 Speed Transmission for Peerless 700-023 FD Kees 539101951 14398 T7520

  • 1 x Brand New Transmission, 36 spline input shaft.
  • Replaces Part Numbers for: Peerless 700-023, FD Kees 539101951.
  • Specially formulated transmission grease-Provides superior lubrication and performance.
  • Die cast aluminum housing- Offers outstanding heat dissipation and durability, Oil-impregnated bushings-With needle bearings on input shaft.
  • Neutral start capability-Allows the installation of a switch to sense if unit is in gear or in neutral.
Check Stock

Single Sided Sign Mile 1 Distance Marker Running Race Black White Yard Sign Road Sign with Stand

  • Replaces original equipment automatic or manually-locking hubs.
  • Brass bushings are oil-impregnated for longer life.
  • Raised center knob allows easier engagement by hand with just 1/4 turn.
  • Features detent ball for positive Locking.
  • All components made from reinforced, heat-treated Steel.
Check Stock

Max Motosports 5 Speed Transmission for Peerless 700-079 Ariens Gravely 04901000 49010 T7511

  • 9 spline input shafts, Replaces Part Numbers: Peerless 700-079.
  • Specially formulated transmission grease-Provides superior lubrication and performance.
  • Die cast aluminum housing- Offers outstanding heat dissipation and durability, Oil-impregnated bushings, With needle bearings on input shaft.
  • Neutral start capability, allows the installation of a switch to sense if unit is in gear or in neutral.
  • Heat-treated gears process ensures maximum durability.
Check Stock

Max Motosports Transmission Replacement for Peerless Toro Exmark Scag 700-070A 14176 4127203 481580 1-323500 39490001

  • 1 x Brand New Transmission, 9 spline input shafts.
  • Specially formulated transmission grease-Provides superior lubrication and performance.
  • Die cast aluminum housing- Offers outstanding heat dissipation and durability, Oil-impregnated bushings, With needle bearings on input shaft.
  • Neutral start capability, allows the installation of a switch to sense if unit is in gear or in neutral.
  • Heat-treated gears process ensures maximum durability.
Check Stock

Fulton 142311 Single Speed Winch with 20' Strap and Cover - 1400 lbs. Capacity, 1 Pack

  • 1, 400 lb. capacity winch designed to meet your toughest pulling demands.
  • features an efficient gear ratio, full-length drum bearings, oil-impregnated shaft bushings, and an 8 inch 'comfort grip' handle for ease of cranking.
  • high-carbon steel gears for superb strength and long-term durability.
  • stamped carbon steel frame provides rigidity, important for gear alignment and longer cycle life.
  • includes 20 foot strap with metal slip hook and safety latch, and cover.Fit type: Vehicle Specific.
Check Stock

Fulton 142314 XLT Single Speed Winch with 20' Strap and Cover - 1800 lbs. Capacity, 1 Pack , black

  • 1, 800 lb. Capacity winch designed to meet your toughest pulling demands.
  • Features an efficient gear ratio, full-length drum bearings, oil-impregnated shaft bushings, and an 8 inch 'comfort grip' handle for ease of Cranking.
  • High-carbon Steel gears for superb strength and long-term durability.
  • Stamped carbon Steel frame provides rigidity, important for gear alignment and longer cycle life.
  • Includes 20 foot strap with metal slip hook and safety latch, and cover.
Check Stock

CM Hurricane Hand Chain Hoist, Hook Mount, 1/2 Ton Capacity, 10' Lift, 11.811\ Headroom, 0.945\ Hook Opening

  • Handwheel cover rotates 360 degrees for hoist operation in any direction to keep operator away from load, Ideal for special rigging applications.
  • Single disc brake requires minimal maintenance and does not incorporate ratchet, pawls, or pawl springs as on other hand chain hoists.
  • All internal gears and pinions are heat treated steel for high strength and long life, Frame and housing made from impact resistant, stamped steel for long life.
  • High quality, oil impregnated bushings and sealed ball bearings for smooth operation, powder coat finish for added corrosion protection.
Check Stock

Electric Grain Grinder, Stainless Steel Grain Mill Barley Grinder Malt Crusher 2 Roller Dry Cereals Grain Grinder Home Brew Mill 110V 60W

  • AdvantagesThe DY368 roller is using food grade stainless steel, Stainless steel excels in resistance to acids, bromides, and iodides at high temperature. It is durable, easy-to-fabricate, clean, weld and finish..
  • Real BearingWe are using real bearing for the roller instead of brass bushings. Real ball bearings not only make the lifetime of the mill longer also make the whole grinding process more efficient..
  • AdjustableIt features an alloy block frame that houses two rollers on stainless steel real ball bearing instead of oil-impregnated bronze bushings. The drive shaft and all axles are integral to the roller, which makes it possible to drive the mill clockwise or counter-clockwise. Stainless knurled knobs allow a gap spacing adjustment range of 2.5cm. Adjusting is simple - just loosen the adjustment screws, adjust the gap and tighten the adjustment screws..
  • Widely UseMulti-functional grinder, cereal, beans, seasoning. DIY your favorite coffee or other food, the best life assistant..
Check Stock

Electric Grain Mill Corn Grinder, Wheat Grinder Machine Heavy Duty 2 IN 1 Commercial Mill Dry Wet 110V Cereals Corn Grain Wheat Feed Machine DIY Home

  • ...ill is a sturdy mill with an aluminum hopper that can hold up to 4L of grains at one time, and it's easy to build your own hopper extension if you need to fit more than this in the hopper. It features an alloy block frame that houses two rollers on stainless steel real ball bearing instead of oil-impregnated bronze bushings..
  • 【Powerful & Efficient】This high quality, precision-machined DY368 mill is easy to set up and use. Just using a 60w gear motor at 75 RPM gives you a crush rate of 20kg(44 pounds) per hour making the big grain bills fast and easy..
  • 【Wide Applicability】Commercial electric corn grinder is suitable for grinding bean curd, starch, rice flour, corn and used in other food industries. Multi-functional grinder, cereal, beans, seasoning. DIY your favorite coffee or other food, the best life assistant..
  • 【Pro Grain Mill】Using real bearing for the roller instead of brass bushings. Real ball bearings not only make the lifetime of the mill longer also make the whole grinding process more efficient. The DY368 grain mill is perfect for large batches and high efficiency milling..
  • 【Main Parameters】Type: Electric grain grinder. Materials: Stainless steel roller, 6061 Aluminum for the mill body and hopper. Voltage: 110V(US PLUG). Power: 6....
Check Stock