Top Oil Resistance Hose Reviews

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • ...marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
  • We Provided 12 months warranty from the date of purchased. Free return within 30 days NO QUESTION ASK..
Check Stock

BOYISEN Oil Change Pump Extractor 12v 80W Oil Extractor Pump Diesel Fluid Transfer Scavenge Suction Pump Oil Quick Changer for Car, Boat, Marine, Motorbike, Truck, RV, ATV(Orange)

  • ...n in the pump, kindly understand. E, To make it last longer, it’s recommended to keep a little oil inside when the extractor pump is not in use.
  • 【Premium Quality】The quality of oil change pump extractor varies widely. We are using pure copper for the motor and alligator. Good electrical conductivity, corrosion resistance and rust free, effectively avoid leakage or short circuit.
  • 【What You Get】The diesel change pump come with 2 outlet hose, 2 inlet hose, 4 hose locks and 2 battery clips. The hose clip enable to thoroughly seal the connection and prevent leaking. A screw driver would help you to secure the hose clips easily, ensure a smooth oil transfer.
  • 【Widely Application】This Scavenge Suction Kit is portable and easy operation, it saves time and keep clean for your oil changing. It is a great helper for Car, Motorcycle, Scooter, Quad Bike, Truck, RV, ATV, Boat, Marine, Forklift, Generator, Tractor, Ride On Mower Etc.
Check Stock

EONLION 12V 100W Oil Change Pump Extractor for Automotive and Marine Upgrade with Over-load Protection and Ease Portable Handle Design Orange

  • [For Optimal Use] 1. Please pay attention to the direction of the inlet and outlet, the positive and negative poles and the locking hose lock before....
  • [Efficient working] The max 100W power is a good helper for you to change the oil quickly and clean. Diesel Flow Rate: 1.5L/min, Engine Oil Flow....
  • [Structure]We use pure copper for motors. Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit.....
  • [Safety] When the oil pump is overheated or operated improperly, the newly added overheat protection device will automatically cut off the power....
  • [Accessories] This oil pump comes with 2 outlet hoses, 2 inlet hoses, 4 hose locks and 2 battery clips..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc

  • Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
  • Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
  • Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
  • Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
  • Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
  • Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Check Stock

BOYISEN Oil Change Pump Extractor 12v 60W Oil Extractor Pump Diesel Fluid Transfer Scavenge Suction Pump Oil Quick Changer for Car, Boat, Marine, Motorbike, Truck, RV, ATV(Yellow)

  • ... in the pump, kindly understand. E, To make it last longer, it’s recommended to keep a little oil inside when the extractor pump is not in use..
  • 【Premium Quality】The quality of oil change pump extractor varies widely. We are using pure copper for the motor and alligator. Good electrical conductivity, corrosion resistance and rust free, effectively avoid leakage or short circuit. Overheat protection will cut off the power supply automatically for safety.
  • 【What You Get】The diesel change pump come with 2 outlet hose, 2 inlet hose, 4 hose locks and 2 battery clips. A screw driver would help you to secure the hose clips easily, ensure a smooth oil transfer.
  • 【Widely Application】This Scavenge Suction Kit is portable and easy operation, it saves time and keep clean for your oil changing. It is a great helper for Car, Motorcycle, Scooter, Quad Bike, Truck, RV, ATV, Boat, Marine, Forklift, Generator, Tractor, Ride On Mower Etc.
Check Stock

LIONMAX Barb Splicer Mender 4 PCS, Brass Barb Union Hose Fittings, 5/16 Inch to 5/16 Inch Barb Hose ID, with 8 Hose Clamps, for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】5/16'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】5/16 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 5/16'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

uxcell Rubber Flat Washers 3/4\ 19mm OD 13mm ID 3mm Thickness with Stainless Steel Inlet Filter, for Faucet Pipe Water Hose, Pack of 12

  • used to install all standard 1-1/2 inch, 1-1/4 inch, 1 inch, 3/4 inch, 1/2 inch, 3/8 inch,1/4 inch pipe fittings or 5/8 inch washing machine hose.
  • {SILICONE}:White silicone gasket food grade has Heat resistant water environmental protection,safety,non-toxic and tasteless.
  • softness and elasticity,resistance high and low temperature resistance: -40 ~ 250 degrees celsius,also has insulation,pressure resistance,insoluble in water and any solvent.
  • {RUBBER}:NBR black flat rubber washers has low temperature resistance,has the advantages of ozone resistance and weather resistance,and is waterproof,flame retardant,wear resistance,oil resistance and many other properties.
  • TWCC washers is a kit very suitable for Plumbers mainter tenance personnel,when compressed against a material,the prevents water,air from coming in or out.this washer also excellent as a vibration damper.
Check Stock

Brass Barb Union Fittings LIONMAX Barb Splicer Mender Hose Fittings 4 PCS 1/4 Inch to 1/4 Inch Barb Hose ID with 8 Hose Clamps for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】1/4'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】1/4 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 1/4'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

DNA Motoring OFL-KIT-008 Universal Turbocharger Oil Drain/Feed Line Kit,Black

  • Stainless Steel Hose, Braided for Heat Resistance, Pressure Resistance and Maximum Durability, Prevent Expansion of the Line..
  • OIL DRAIN LINE: 10AN Fittings / Inner Diameter: 0.50" / Length: 21.00".
  • CNC Machined Turbo Adapter Plate with Built in 1mm Oil Restrictor.
  • OIL FEED LINE: Length: 40.00" / 1/8 NPT Fittings Natural Polish Finish.
  • FUNCTION: Helps to circulate the oil from the turbocharger to the oil sump.
  • Offers a seamless transfer of lubricant to and from the engine's turbocharger.
  • Effectively prevent oil seal damage caused by excessive oil pressure.
  • PACKAGE INCLUEDE: 1 X Turbo Oil Drain/ Feed Line Kit.
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
  • 5.Professional installation recommended: PTFE hose relatively hard, it can't be bend and folding in half. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has exc....
Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

DAVCO 3/4\ ID x 25 ft PVC Reinforced Tubing With Spiral Steel Wire, High Pressure Flexible Vinyl Hose Heavy Duty Clear Suction Tube,Non-Toxic, Vacuum Dust Collection Pipe

  • ... service life, the service life of steel wire hose is 5 times of ordinary hose, is the ideal choice of hose..
  • [Tubing Details]. 3/4 inch inner diameter, 1 inch outer diameter, wall thickness: 1/8 inch , 25 feet length. Max Working pressure:120 PSI. Temperature range: 25°F to 150°F(-4°c to 66°c)..
  • [Strong Pressure Resistance]. DAVCO tube wall is thickened design, strong resistance, in vacuum and high temperature environment can maintain a good working pressure up to 8 bar, with steel wire embedded layer, hose bearing capacity is stronger, will not burst..
  • [High standards]. DAVCO clear vinyl tubing use professional technology and teams. The DAVCO brand has high requirements for products, and every product that is manufactured must go through 5 inspection and testing stages，ensuring that every product meets our high expectations. In addition, Our team in Los Angeles, CA is fully committed to providing 7x24 customer & technical support. Thus ensuring that customers have a good shopping experience..
  • [Experienced and professional]. DAVCO is a professional brand that is committed to the water hose production industry. For the past 10 years, our products have been sold all over the world, and countless families have used or products as their solution..
Check Stock