DEWALT 513002700 Regulator Repair Kit
- N003307SV Air Compressor Pressure Switch Kit.
- Includes: Pressure Switch, 2 Leads, Attached Hose, & Installation Instructions.
Top Oil Pressure Switch Installation Kit Reviews
MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial
- Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
- FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
- Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
- INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
- One-year warranty for non-human factor damage and free lifetime technical support..
Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator
- EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
- DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
- PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
- PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
- WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).
JoyFans Oil Pressure Tester Tool, 0-140PSI Oil Pressure Gauge Kit for Fuel System Mechanical Sensor Engine Cylinder Compression Test with Hose Adapters for Cars ATVs Trucks Use Red Case
- ...r for easy and accurate work on both American and metric systems. Keeping the gauge safe from bumps and drops. Built-in hose assembly also comes with a side pressure relief button for instant pressure reset and no repeated hose disconnect, and 4 ft long flexible hose with convenient quick coupler for simple adapter installation and removal..
- Durable Construction: 11-piece metal adapters are all made with heavy-duty forged steel and brass hardened for maximum strength and longevity.
- designed to withstand extreme pressure in any situation for professional use. Each thread adapter marked with number, features black oxide finish to resist rust and corrosion.
- and the 90° coupling adapter prepared for limited access applications. Reinforced gauge hose uses ruber nylon resin material and has max working pressure 300 psi..
- Wide Range of Application: If you are looking for a reliable auto fuel system oil pressure kit, this is exactly what you need. Oil pressure gauge tester kit comes with 1pc oil pressure gauge, 1pc 90° elbow fitting, 10pcs steel adapters and spare seal gaskets.
- Ideal for use on most types of domestic and imported cars, motorcycles, boats and other vehicles with gasoline engines and small diesel engines. Always notice the low pressure range o....
Compatible with 12677836 Oil Pressure Sensor Switch D1846A Replacement for Equipment 12616646,12573107, 12562230,12614969, 12569323, 12562230, 12556117, 12559780,8125622300, 8125731070,
- The main job of an engine oil pressure sensor / switch is to keep track of the oil pressure in the vehicle and then transmit this information straight to the combination meter or the instrument panel. If the vehicle has an electronic control module, then the oil pressure sensor will send this information to the module where it can be calculated.
- Oil Pressure Sensor Replaces OEM #: 12616646,D1846A,12556117,12559780,12569323,12573107, 12614969.
- Oil pressure sensor fits for 2003-2008 GMC Envoy, 2004-2007 Cadillac CTS, 2003-2008 Cadillac Escalade, 2003-2008 Chevrolet Avalanche , 1997-2008 Chevrolet Corvette, 2003-2008 Hummer H2 , 2008-2009 Pontiac G8. Please find more compatiblity in the product information.
- Manufactured from high-quality materials for durability, meets or exceeds OEM standards, and 100% tested before shipping.
- Direct replacement for a proper fit and easy installation, check youtube video if you have installation problem..
Derale 13950 Atomic-Cool Remote Cooler , Black
- Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
- Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
- Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
- Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
- Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
EVIL ENERGY 10 Row AN10 Oil Cooler Kit Universal 10AN Engine Transmission Aluminium Alloy Black
- Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
- Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
- Function:keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
- Size:10AN 10Row oil cooler,Oil Capacity:0.24L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
- EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
EVIL ENERGY 15 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black
- Universal: universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
- Installation location: choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
- Function: keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.This stacked-plate oil cooler can be used to cool down engine,transmission, and rear-differentials..
- Size: 10AN 15Row oil cooler,Oil Capacity:0.8L.Test Pressure: 116psi,Burst Pressure:232psi.Material:aluminium alloy..
- Please measure before purchase.EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
Alltrade 648992 Kit 62 Specialty Switch Socket Tool Set
- Made to be the most reliable tools in the market today.
- Tool set for removal and installation of hard to reach sensors and switches.
- For hard to reach oxygen sensors and thermal sensor switches.
- For hard to reach oil pressure switches and oil pressure sending units.
- Kit 62 includes 7-Piece for removal and installation of hard to reach sensors and switches.
5PCS Oxygen O2 Sensor Socket Wrench 22mm Removal Tool Thread Chaser Set
- ...slot. 1PC 3/8'' Drive x 7/8'' vacuum switch socket with slot. 1PC 3/8'' Drive x7/8'' (6 point) vacuum switch socket with slot. 1PC 3/8'' Drive x 1-1/16'' & 1'' (6 point) oil pressure sending unit socket. 1PC 3/8'' DR x 7/8'' (6 point) short sensor wrench socket with slot..
- 【FUNCTION】 Designed for the removal and installation of sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes on most vehicles. Provide additional leverage even in hard-to-reach places. We offers premium after-sales service and technical support to each customer..
- 【FEATURES】 Constructed of high performance chrome vanadium for strength and durability. Finished with Black Oxide to avoid rust. Side cutout design allows easy access to from section and avoids from damage to wire..
- 【PLUG AND PLAY】 Universal 6-point 7/8” (22mm) socket opening fits all hexagon sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
- 【1 YEAR WARRANTY】 We provide 1 year warranty, support replace, return and refund service. We will randomly send out blue or red plastic cases, except for the color, they are exactly the same. Make sure the car information before purchasing it, feel free to Contact us if you have any question..
YAMATIC 3/4\ Shaft Horizontal Pressure Washer Pump - 3000 PSI @ 2.5 GPM - Original Engineering OEM Pump for Most Brand gas engine power washer
- Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3700 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more.
- Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
- Adjustable power: This pump includes PowerBoost Technology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
- Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
- Get the right pump for your machine: this pump is designed for g....
Oil Pressure Tester Kit, 0-140 PSI Engine Oil Pressure Tester Gauge Tool Kit for Cars ATVs Trucks Use.
- FUNCTION: The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. The measured value can be used to judge the operation of fuel system components such as electric gasoline pump and oil pressure regulator. And with this best in class oil pressure test tools, you can get a definite pressure value well without relying on the dashboard light..
- INCLUDING: This oil pressure test tool kit contains a wide assortment of durable adapters designed to fit mot import/domestic engines. The 10 adapters are marked with number, you can choose the right one very easy. 4FT long hose is made of rubber nylon resin, working pressure 300 PSI. This is a great kit for DIY auto tools, to test engine oil pressure value quickly and accurately..
- DURABLE AND SAFE: The material of the engine oil pressure tester kit consists of Copper, Rubber, ABS Plastic, Iron, and Aluminum.
- And the gauge is equipped with a shockproof cover, which is under great protect and convenient maneuverability.
- Whole oil pressure tester kit packed in a molded case making it easy to store and organize the equipment..
- PARAMETER: The oil pressure gauge use 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large ....
25070-CD000 PS417 Oil Pressure Switch Sensor fits for Infiniti QX56 & Nissan 350Z Altima Armada
- ▶ Replace Part Number: 25070-CD000, 25070CD000, 25070-CD00A, 25070CD00A, PS417, PS561, 1S6896,201-2368, 30GE291GT725R..
- ▶ Oil Pressure Sensor Switch Compatible with: 2004-2006 QX56 & 350Z GT-R Sentra Altima Armada Pathfinder Frontier Titan..
- ▶ The oil pressure switch will be located on the motor threaded into the engine block..
- ▶ Perfect Match for the original car and easy installation..
- ▶ piezo-style designs produce no extraneous noise and are less susceptible to electrical noise in the engine compartment..