Top Oil Pipe Fuel Tube Reviews

KIPA 5/16\ Inch ID Fuel Line Set - 2 Meter / 6 Foot 5/16\ Inch Fuel Line + 4 Pcs 5/16 Inch Fuel Filters + 20 Pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines

Top Quality: 3-Layers designed, inner pipe, outer pipe and intermediate reinforcing layer, The inner and the outer pipe are made of fluoro elastomer and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance, petroleum-resistant nitrile tube with a covering that resists weathering, ozone ,heat and can be used for ethanol-laced fuels and diesel fuel. This fuel hose is SAE 30R9-rated that will withstand up to 120 psi and 300 degrees..
Fitment: includes 6 Feet 5/16" Fuel Line.
4Pcs x 1/4 Inch & 5/16 Inch Fuel Filters.
20 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. They could be used widely for update your fuel line system, such as outboard boat system, motorcycles, ATVs, UTVs, Go Kart, Auto Vehicle's. Fuel line kit could also be used widely on lawnmower, Generator, power equipment and small engines Tool Etc..
Perfect fuel filters, They could effectively Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor & Fuel pump & Fuel Tank, transmiss Steady clean fuel flows and keep engines Running at the top performance...
Hose Clamps: They are Made of 65Mn Spring Steel, durable and can be reu....

Check Stock

uxcell 2pcs Lubricating Oil Hose 3mm(1/8-inch) ID x 5mm(3/16-inch) OD 3.3ft Water Tube Black Rubber Tubing

【APPLICATION】- Lubricating Line Hose mainly used to transport lubricating oil.
【Advantage】- Lubricating Hose has Oil resistant, wear-resistant, aging resistant, soft, lightweight, good bending performance, smooth appearance.
【FEATURE】- Lubricating Tube Measures 0.12-inches inside diameter by 0.2-inches outside diameter by 3.28-feet total length. 0.04" thin tube wall providing higher flow rates and working pressure.
【Rubber material】- Lubricating Pipe made in Rubber, which has the characteristics of high-temperature resistance, oil resistance..
【Please Note】- The hose can not transport fuel oil on equipment.

Check Stock

55587854 Pipe Turbo Oil Return Pipe Tube for Chevy Cruze Sonic Trax Buick Encore 1.4L Engine Turbocharger Oil Return Hose Line 55569839

[Fitment] - Turbo oil return hose tube line fit for 2011- 2019 Chevrolet Cruze 1.4L, for 2016 Chevrolet Cruze Limited 1.4L, for 2012-2019 Chevrolet....
[Replace Part Number] - Turbo oil return pipe tube replace number is 55587854 55569839..
[Please Note] - This oil tube pipe usually fails when the turbo get too hot or suggested to change whenever the oil turbo hose is replaced..
[Material] - Engine turbocharger oil return hose made of high quality materials, supplier quality similar as original. 55587854 pipe direct....
[What You Will Get] - We offer 55587854 turbo oil return pipe tube Fitor chevy cruze worry-free 2-years service, any questions about the turbo oil....

Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 5/16\ 3.3ft Blue for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 5/16-inch(5mm x 8mm)(ID. x OD.), 1/16-inch(1.5mm) wall thickness.
The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
Steps of installation: 1.Prepare a fuel line hose.
Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.

Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 3/8\ 3.3ft Yellow for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 3/8-inch(4.5mm x 9.3mm)(ID. x OD.), 3/32-inch(2.4mm) wall thickness.
The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
Steps of installation: 1.Prepare a fuel line hose.
Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.

Check Stock

MECCANIXITY PVC Petrol Fuel Line Hose 3/16 x 5/16 16ft Pink for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for....
Fuel line hose, is in size of : 5mm/0.2-inch inner dia, 8mm/0.31-inch outer dia, 1.5mm/0.06-inch wall thickness, 5m/16ft total length.
The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment.....
Steps of installation: 1.Prepare a fuel line hose.
Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.

Check Stock

Harbot Carburetor for Stihl 021 023 025 MS210 MS230 MS250 Chainsaw WT286 with Air Filter Fuel Oil Cap Tune Up Kit

MS250 Carburetor for STIHL 021 023 025 MS20 MS230 MS250 easy start version Chainsaw.
Package including 1 carburetor + 1 gasket + 1 oil filter + 1 oil pipe + 1 fuel filter +1 fuel pipe + 1 spark plug + 1 air filter with house assembly + 1 Fuel Cap + 1 Oil Cap.

Check Stock

Fuel Injector Cleaner Tool Car Fuel System Cleaner Kit Portable Non-Dismantle Cleaning Tools Fuel Injector Tester 600ML 140PSI Injector Cleaning Machine(Without Liquid)

【Disassembly-Free & Dual-System Fuel System Cleaner Kit】The fuel system cleaner kit is used to clean the fuel injector, intake system and three-way catalytic converter. It can clean the car without disassembly. And it has two electronic fuel injection systems. One engine has an oil return pipe, and the other engine does not have an oil return pipe (Quick-connect anti-corrosion, anti-friction joints and anti-friction pipes for all cleaning fluids.).
【Adjustment of Throttle Mode of Fuel Injector Cleaning Kit】The connection method is the same, just adjust the air source pressure to 1-5PSI. How to identify the inlet and return hoses: ①Generally speaking, the larger the inlet pipe, the smaller the return pipe.
②There is always a filter interface on the side of the inlet hose and a buffer interface on the return side.
③There is an arrow on the hose Indicate the fuel flow direction..
【Widely Applicable Engine Cleaning Tools】 This injector cleaning tool set is widely used in almost all types of cars and light trucks, and has a complete set of accessories, including various adapters (such as: one-way valve, dedicated to gas sealing and durable Pressure regulator, anti-friction hose, etc.).

Check Stock

Fuel Line Plier Petrol Clip Pipe Plier Hose Pipe Disconnect Release Removal Pliers Clamps Tool

【Size】：The total length approx:9”/220mm, handle length approx:4”/100mm, Maximum opening approx:2.4”/60mm. Heavy duty design, 8mm....
【High quality material】：This fuel pipe plier is made of high-quality steel material, which is durable and sturdy. It is not easily damaged, has....
【Useing】：Suitable for installation of automotive water pipes and removal of spring bundle. Like fuel line, gasoline pipe, urea pipe, oil pipe..
【Scope of application】：The fuel hose plier has high practicality, which is a practical tool for disassembling and replacing the connections on....
【Design features】：The fuel line clip release plier designed according to ergonomics principle, which is labor saving and comfortable to use.Use....

Check Stock

Universal Electric Fuel Pump Kit for All 12V Cars Trucks Boats Carburetor Lawn Mower, DC 12V (3-6PSI) Fuel Pump+ 2M 5/16" ID Fuel Line + Fuel Filters + 10pcs Hose Clamp

Output Pressure is 3-6 psi, Pressure : 0.032-0 .045 MPA.
which can reach 80-100 (liters/hour) per hour, and the oil absorption capacity is strong enough to ensure the supply of fuel..
- : Fits 5/16 "Oil Pipe, 5/16" Joint Or Connector At Each End, Transparent Plastic Shell, Orange Inner Filter, With Metal Brass End Caps On The Top And Bottom Of The Filter, Filter Out Impurities And Precipitation In Gasoline, Reduce Parts Wear And Protect The Engine, Direct Installation, Simple And Convenient..
: You Will Get A Universal 12V (3-6PSI) Electric Fuel Transfer Pump + 2m/79-Inch Reinforced Fuel Pipe + 5/16-Inch Fuel Filter + 10 Hose Clamps. The kit fit all 12 Volt Cars (such as Toyota, Ford, Honda, Mazda, and any other suitable car), Trucks, Boats & Generators, Lawnmower..
: The wall thickness is 3.2mm. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance..
: If you are not satisfied with our electric....

Check Stock

ECCPP Fuel Gas Tank Filler Neck Tube Pipe XL5Z9034KB XL5Z9034DB Fuel Tank Tube Fit for 1998-2000 for Ford Ranger 1998-2000 for Mazda B2500 1998-2000 for Mazda B3000 1998-2000 for Mazda B4000

FITMENT- Gas fuel tank filler neck tube pipe fit for 1998 1999 2000 for Ford Ranger 1998 1999 2000 for Mazda B2500 1998 1999 2000 for Mazda B3000 1998 1999 2000 for Mazda B4000.
FUNCTION- The fuel gas tank filler neck pipe is made of steel with low fuel permeability, gasoline resistance and chemical resistance, which can avoid fuel leakage during refueling and ensure the normal driving of the car.
REMINDER- Deterioration of the fuel filler neck will cause fuel leakage, fuel pump premature failure, fuel filter and injector blockage, wire damage etc,so replace a new pipe is very necessary.
EASY INSTALLATION- The fuel tank filler neck with light weight ,it is easy to install with simple hand tools in just minutes.
ATTENTION- Please check the descriptions and compatibility chart to ensure that the replacement fits your auto before your purchasing.Please contact us if you have any question.

Check Stock

Universal Fuel Injector Cleaning Tool, Non-Dismantle Fuel Injector Cleaner Tester Petrol Cleaner Kit 600ML 140PSI

【Professional Cleaner Tool】 Improper cleaning of automobile fuel system will lead to TWC blockage and poisoning. fuel injector cleaner kit is a professional fuel injector cleaner, which can help you clean the whole fuel system quickly and simply, including TWC, intake manifold, throttle and exhaust pipe, etc..
【EFI-Electronic Fuel Injection System】 There two types of Electronic Fuel Injection System, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI..
【Advantage of Non-Dismantle injector】 Can operate non-dismantle cleaning to Fuel System, it can operate cleaning air induction system, optional pipe clamp, fast and safe, multiple connectors match most European Union, Asian, American cars and light trucks..
【Multifunctional Fuel Injection Cleaner Tool】 The non-dismantle cleaner has a special handling one-way valves to seal up gas and durable pressure regulating valves. In addition, it also has anti-corrosion, anti-friction connector....

Check Stock

Joywayus 40PCS 3/8 Tube OD Brass Compression Insert Tube Fitting

Suitable for the outer diameter of the pipe:3/8"..
Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..

Check Stock