Top Oil Level Gage Reviews

YPG C1X Adjustable Limit Snap Gage with Hardened Steel Anvils, 0\-1/4\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'C' type adjustable limit snap gage.
  • A one piece, rectangular anvil and two adjustable square anvils all manufactured from hardened, lapped, tool steel, form the base of the measuring gage.
  • The large anvil gauging surfaces of the type 'C' ensures a long life.
  • Consistently high level of measuring capability and repeatability.
Check Stock

YPG C2X Adjustable Limit Snap Gage with Hardened Steel Anvils, 1/2\-3/4\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'C' type adjustable limit snap gage.
  • A one piece, rectangular anvil and two adjustable square anvils all manufactured from hardened, lapped, tool steel, form the base of the measuring gage.
  • The large anvil gauging surfaces of the type 'C' ensures a long life.
  • Consistently high level of measuring capability and repeatability.
Check Stock

YPG C3X Adjustable Limit Snap Gage with Hardened Steel Anvils, 1\-1-1/4\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'C' type adjustable limit snap gage.
  • A one piece, rectangular anvil and two adjustable square anvils all manufactured from hardened, lapped, tool steel, form the base of the measuring gage.
  • The large anvil gauging surfaces of the type 'C' ensures a long life.
  • Consistently high level of measuring capability and repeatability.
Check Stock

YPG U7X Adjustable Limit Snap Gage for Measuring External Grooves, 2-5/8\-3\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'C' type adjustable limit snap gage.
  • A one piece, rectangular anvil and two adjustable square anvils all manufactured from hardened, lapped, tool steel, form the base of the measuring gage.
  • The large anvil gauging surfaces of the type 'C' ensures a long life.
  • Consistently high level of measuring capability and repeatability.
Check Stock

YPG C7X Adjustable Limit Snap Gage with Hardened Steel Anvils, 3-1/16\-3-7/16\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'C' type adjustable limit snap gage.
  • A one piece, rectangular anvil and two adjustable square anvils all manufactured from hardened, lapped, tool steel, form the base of the measuring gage.
  • The large anvil gauging surfaces of the type 'C' ensures a long life.
  • Consistently high level of measuring capability and repeatability.
Check Stock

Aluminum Alloy Pin Gage Handle Double End Go No Go Gauge Handle (1-2mm)

  • 【DEDICATED HANDLE】 Our pin gage handle with dedicated handle for pin gage, go-no go gage and plug gage..
  • 【CLAMPING RANGE】 There are optional clamping range from 0.3mm to 16mm for you to choose..
  • 【ALUMINUM ALLOY】 The pin gage handle is made of aluminum alloy material, with delicate appearance and long durability..
  • 【EASY TO USE】 The pin gage holder with simple structure, and detachable design, is easy to use..
  • 【BEAUTIFUL APPEARANCE】 The pin gage handle with green and red color of each end, which is beautiful and convenient to use..
Check Stock

6 Pcs 5/16\ to 6\ Telescopic Gauge Bore Gauge Telescoping Gage Set High Precision T Bore Hole Gauge Bore Measurement Tool

  • 【Easy to Adjust】This telescopic bore gauge set allow the most pinhole gauge on the retractable gauge to enter, can quick check holes, slots and recess up to 6" deep..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface.Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Peration Method】 Use the small hole gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with bore micrometer or caliper to determine the final hole size..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock

Telescoping Gage Set, 6Pcs Precision Telescopic Gauge 8-150mm Adjustable Inner Diameter Gauge Micrometer Measuring Tools T-Bore Hole Gauge

  • ...ct are head treated steel and precision ground to a radius allowing proper clearance on the smallest hole the gauge will enter..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface. Self centering telescoping gauge has high rigidity, good wear resistance. Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】 Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Scope of Application】 Telescopic spring piston in the hole (or groove), can conduct inner diameter detection, used with micrometer or caliper, with knurled locking device..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock

Forster Products 5.56 NATO MIN and MAX Headspace Gage Set

  • 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
  • GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
Check Stock

HFS(R) 6 Pc Precision Telescoping Gage Set 5/16\ - 6\ Range T-Bore Hole Gauges w/Pouch

  • [MATERIAL]: It is made of carbon steel with chrome plating on the surface.
  • [PACKAGE INCLUDE]: Range: 5/16" - 6" (8mm to 150mm),6PCS in total(1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall).
  • [OPERATION METHOD]: Use the gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with micrometer or caliper to determine the final hole size.
  • [HIGH PERFORMANCE]: The rigid handle and double acting design (automatic centering) can quickly check the internal dimension. The spring tension is constant and the hand feel is even..
  • [APPLICATION]: It is used to obtain the exact size of holes and slots, which is suitable for factories, schools, offices and other places.
Check Stock

52Pcs Stainless Steel Thread Measuring Gage, Precise Screw Thread Measuring Gage Pitch Measuring Tool 60 Degree (Metric& Imperial)

  • [Adjusted Freely]: Thread measuring gage is using rotary switch, which can be freely adjusted. Mini size and compact, the pitch measuring gage won't occupy too much space, carry it around easily with the convenience.
  • [Magnetic Head]: The thread plug gage, through quenching processing, strong hardness, head with a magnetic. Narrow-leaved designed to measure the external and internal threads - even in small holes.
  • [Precise Measurement]: Thread measuring gage comes with precise measurements and simple design, which can be widely used and durable. Measuring range: 0.25 - 6.00mm/0.0098" - 0.23".
  • [Best Checking Angle Tool]: Stainless steel thread measuring gage is useful for checking tool angle while cutting threads in metal turning lathes. Applied to measure thread and external thread tooth pitch, a great measuring tool for your working.
  • [Premium Stainless Steel Material]: Made of premium stainless steel material, this measuring gage is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
Check Stock

B-TEK BT-BC-2424-300/500-SP Carbon Steel Industrial Bench Scale, 24\ Length x 24\ Width, 500 lbs Capacity

  • Adjustable feet and bubble level to ensure level surface.
  • NTEP Platform size 24" length by 24" width.
Check Stock

HFS (R) 81PCS Grade B GAGE Gauge Block Set

  • [Packing]: 81 Pieces. 9 blocks: .1001-.1009" in .0001" steps.
  • 49 Blocks: .101-.149" in .001" Steps, 19 Blocks: .050-.950" in .050 steps, 4 Blocks: 1-4" in 1" steps.
  • [Material]: Set made of fully seasoned alloy tool steel with hardened to 65 RC to provide both long wear and resistance to stains and rust.
  • [Instructions]: Blocks manufactured under carefully controlled conditions, allowing for the highest degree of accuracy when used at room temperatures of 68 degrees F (20 degrees C).
  • [Grade]: All gage block sets are certified by an accredited ISO-17025 Gage lab with long form certification. Individual serial numbers on each block, regardless of grade.
  • [Application]: Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. Grade B gage blocks are commonly used in workshops for calibrating and inspecting mounting tools and cutters.
Check Stock